{
  "id": "flsol_taskE_auto_optimize_scan",
  "snapshot": "flsol",
  "instruction": "假设你的目标就是测量样品的荧光图谱。下面的透露给你的辅助信息，把辅助信息当成你自己的思维和决策并完全遵循，而不是把它当成任务，**绝对不允许在输出的「观察」「判断」中说明是任务要求，而是把辅助信息当成你自己的经验，用根据我的经验使用某某配置而不是根据任务要求使用某某配置**因为下面的步骤是完全正确和精准的，你只需要执行，而且绝对不允许在：是严格按坐标执行，每步执行完等待界面响应再执行下一步，禁止连续操作。修改任何数值输入框时必须：先double_click双击全选pyautogui.click(x,y);pyautogui.click(x,y))，再pyautogui.press(delete)，最后用pyautogui.typewrite输入新值。1.等待主界面加载并确认正常；2.点击sample(80,159)打开保存位置选择，双击选中sample name文本框(563,346)，并清空和重命名为test 3. 双击选中comment 文本框（583,381）的内容，并清空 4. 点击elect 按钮（796,613）弹出输出的目标文件夹，5. 点击创建新文件夹图标（784,410），命名为test,然后回车，再次回车进入test文件夹 5.然后点击保存（942，718）。然后点击ok（535,650）关闭sample界面 6. 点击Method(36,166)进入Instrument(456,293)；7.设置EX_WL(497,472)为350nm；8.设置EM_Start_WL(493,500)为400nm，EM_End_WL(495,524)为700nm；9.设置PMT_Voltage(758,369)为700V；10.设置EX_Slit下拉框(771,321)为2.5nm，点击下拉框EM_Slit(764,344)出现下拉选项选择5nm(748,386)；11.点击Report(638,290)确认Data_start(718,455)和Data_end(717,480)与EM_Start_WL和EM_End_WL的值一致；12.点击确定(641,717)；13.等待parameters更新完成并ready后，才可点击Measure(182,162)测量并观察谱图；14.点击底部左下角ex3的输出结果最大化按钮(108,948)",
  "source": "custom",
  "config": [],
  "trajectory": "trajectories/",
  "related_apps": [
    "flsol"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "sleep",
        "parameters": {
          "seconds": 5
        }
      }
    ],
    "func": "vllm_eval",
    "expected": {
      "description": "FL Solutions 主界面中图表区域应显示一条完整的荧光发射光谱曲线：峰形平滑、顶部无截断（曲线最高点不贴近纵轴上限）、基线平稳、信噪比良好。界面中的仪器参数区域应可见激发波长 350 nm、发射扫描范围 380-700 nm，以及经过迭代调整后的最终 PMT 电压和狭缝宽度参数。"
    }
  },
  "proxy": false,
  "fixed_ip": true,
  "possibility_of_env_change": "medium",
  "metadata": {
    "input_files": [],
    "steps": "",
    "steps_original": "1. 打开 FL Solutions，新建波长扫描方法。\n2. 设置激发波长 350 nm，发射范围 380-700 nm，初始 PMT 700V，狭缝 2.5 nm。\n3. 执行测量，观察谱图。\n4. 若峰截断则降低 PMT 电压和/或缩小狭缝；若信号过弱则升高 PMT 电压和/或增大狭缝。\n5. 反复迭代测量直到峰形完整显示，截图记录最终结果。",
    "difficulty": "hard",
    "highlight": "AI 能够读取谱图质量并进行闭环迭代调参，体现真正的仪器操控智能，而非机械执行固定步骤。",
    "ui_coordinates": {
      "application": "FL Solutions - F-4600",
      "main_window": {
        "name": "F-4600 FL Spectrophotometer on USB",
        "toolbar": [
          {
            "name": "Method",
            "type": "Button_Icon",
            "center": [
              36,
              166
            ],
            "description": "打开分析方法设置窗口"
          },
          {
            "name": "Measure",
            "type": "Button_Icon",
            "center": [
              182,
              162
            ],
            "description": "执行测量"
          }
        ],
        "monitor_panel": [
          {
            "name": "Fluorescence_Value",
            "type": "Display",
            "center": [
              959,
              240
            ]
          },
          {
            "name": "EX_WL_Display",
            "type": "Text",
            "center": [
              912,
              262
            ]
          },
          {
            "name": "EM_WL_Display",
            "type": "Text",
            "center": [
              0,
              0
            ]
          },
          {
            "name": "Status_Ready_Label",
            "type": "Status_Indicator",
            "center": [
              0,
              0
            ],
            "color_hint": "Green"
          }
        ]
      },
      "sub_windows": {
        "Analysis_Method": {
          "common_controls": {
            "tabs": [
              {
                "name": "General",
                "center": [
                  398,
                  291
                ]
              },
              {
                "name": "Instrument",
                "center": [
                  456,
                  293
                ]
              },
              {
                "name": "Monitor",
                "center": [
                  524,
                  295
                ]
              },
              {
                "name": "Processing",
                "center": [
                  574,
                  293
                ]
              },
              {
                "name": "Report",
                "center": [
                  638,
                  290
                ]
              }
            ],
            "footer_buttons": [
              {
                "name": "确定",
                "center": [
                  641,
                  717
                ]
              },
              {
                "name": "取消",
                "center": [
                  719,
                  717
                ]
              },
              {
                "name": "应用",
                "center": [
                  788,
                  717
                ],
                "status": "disabled"
              },
              {
                "name": "帮助",
                "center": [
                  882,
                  717
                ]
              }
            ],
            "close_button": {
              "name": "Close_Window",
              "center": [
                905,
                263
              ]
            }
          },
          "tabs_content": {
            "General": [
              {
                "type": "ComboBox",
                "name": "Measurement",
                "center": [
                  512,
                  321
                ],
                "value": "Wavelength scan"
              },
              {
                "type": "Edit",
                "name": "Operator",
                "center": [
                  533,
                  349
                ],
                "value": "Administrator"
              },
              {
                "type": "Edit",
                "name": "Instrument_Model",
                "center": [
                  0,
                  0
                ]
              },
              {
                "type": "ComboBox",
                "name": "Sampling",
                "center": [
                  0,
                  0
                ],
                "status": "disabled"
              },
              {
                "type": "Edit",
                "name": "Comments",
                "center": [
                  0,
                  0
                ]
              },
              {
                "type": "CheckBox",
                "name": "Use_sample_table",
                "center": [
                  0,
                  0
                ]
              },
              {
                "type": "Button",
                "name": "Load",
                "center": [
                  0,
                  0
                ]
              },
              {
                "type": "Button",
                "name": "Save",
                "center": [
                  0,
                  0
                ]
              },
              {
                "type": "Button",
                "name": "Save_As",
                "center": [
                  0,
                  0
                ]
              }
            ],
            "Instrument": [
              {
                "type": "ComboBox",
                "name": "Scan_mode",
                "center": [
                  550,
                  322
                ]
              },
              {
                "type": "ComboBox",
                "name": "Data_mode",
                "center": [
                  526,
                  347
                ]
              },
              {
                "type": "Edit",
                "name": "EX_WL",
                "center": [
                  497,
                  472
                ],
                "unit": "nm"
              },
              {
                "type": "Edit",
                "name": "EM_Start_WL",
                "center": [
                  493,
                  500
                ],
                "unit": "nm"
              },
              {
                "type": "Edit",
                "name": "EM_End_WL",
                "center": [
                  495,
                  524
                ],
                "unit": "nm"
              },
              {
                "type": "ComboBox",
                "name": "Scan_speed",
                "center": [
                  497,
                  549
                ],
                "unit": "nm/min"
              },
              {
                "type": "ComboBox",
                "name": "EX_Slit",
                "center": [
                  771,
                  321
                ],
                "unit": "nm"
              },
              {
                "type": "ComboBox",
                "name": "EM_Slit",
                "center": [
                  764,
                  344
                ],
                "unit": "nm"
              },
              {
                "type": "Edit_Spin",
                "name": "PMT_Voltage",
                "center": [
                  758,
                  369
                ],
                "unit": "V"
              },
              {
                "type": "CheckBox",
                "name": "PMT_Voltage_Limit",
                "center": [
                  0,
                  0
                ],
                "label": "PMT Voltage 0-1000V"
              },
              {
                "type": "ComboBox",
                "name": "Response",
                "center": [
                  0,
                  0
                ],
                "unit": "s"
              },
              {
                "type": "Edit_Spin",
                "name": "Replicates",
                "center": [
                  0,
                  0
                ]
              }
            ],
            "Monitor": [
              {
                "type": "Edit",
                "name": "Y_Axis_Max",
                "center": [
                  455,
                  343
                ]
              },
              {
                "type": "Edit",
                "name": "Y_Axis_Min",
                "center": [
                  455,
                  375
                ]
              },
              {
                "type": "CheckBox",
                "name": "Open_processing_after_acquisition",
                "center": [
                  396,
                  437
                ]
              },
              {
                "type": "CheckBox",
                "name": "Overlay",
                "center": [
                  395,
                  503
                ]
              }
            ],
            "Report": [
              {
                "type": "Edit",
                "name": "Data_start_Value",
                "center": [
                  718,
                  455
                ],
                "unit": "nm"
              },
              {
                "type": "Edit",
                "name": "Data_end_Value",
                "center": [
                  717,
                  480
                ],
                "unit": "nm"
              }
            ]
          }
        }
      }
    }
  }
}