fix teleop

examples/test_torque/var_table.json

@@ -0,0 +1,49 @@
+STS_SERIES_CONTROL_TABLE = {
+    "Model": (3, 2),
+    "ID": (5, 1),
+    "Baud_Rate": (6, 1),
+    "Return_Delay": (7, 1),
+    "Response_Status_Level": (8, 1),
+    "Min_Angle_Limit": (9, 2),
+    "Max_Angle_Limit": (11, 2),
+    "Max_Temperature_Limit": (13, 1),
+    "Max_Voltage_Limit": (14, 1),
+    "Min_Voltage_Limit": (15, 1),
+    "Max_Torque_Limit": (16, 2),
+    "Phase": (18, 1),
+    "Unloading_Condition": (19, 1),
+    "LED_Alarm_Condition": (20, 1),
+    "P_Coefficient": (21, 1),
+    "D_Coefficient": (22, 1),
+    "I_Coefficient": (23, 1),
+    "Minimum_Startup_Force": (24, 2),
+    "CW_Dead_Zone": (26, 1),
+    "CCW_Dead_Zone": (27, 1),
+    "Protection_Current": (28, 2),
+    "Angular_Resolution": (30, 1),
+    "Offset": (31, 2),
+    "Mode": (33, 1),
+    "Protective_Torque": (34, 1),
+    "Protection_Time": (35, 1),
+    "Overload_Torque": (36, 1),
+    "Speed_closed_loop_P_proportional_coefficient": (37, 1),
+    "Over_Current_Protection_Time": (38, 1),
+    "Velocity_closed_loop_I_integral_coefficient": (39, 1),
+    "Torque_Enable": (40, 1),
+    "Acceleration": (41, 1),
+    "Goal_Position": (42, 2),
+    "Goal_Time": (44, 2),
+    "Goal_Speed": (46, 2),
+    "Torque_Limit": (48, 2),
+    "Lock": (55, 1),
+    "Present_Position": (56, 2),
+    "Present_Speed": (58, 2),
+    "Present_Load": (60, 2),
+    "Present_Voltage": (62, 1),
+    "Present_Temperature": (63, 1),
+    "Status": (65, 1),
+    "Moving": (66, 1),
+    "Present_Current": (69, 2),
+    # Not in the Memory Table
+    "Maximum_Acceleration": (85, 2),
+}