Add FeetechMotorsBus, SO-100, Moss-v1 (#419)

Co-authored-by: jess-moss <jess.moss@huggingface.co>
Co-authored-by: Simon Alibert <75076266+aliberts@users.noreply.github.com>

lerobot/configs/robot/aloha.yaml

@@ -1,11 +1,13 @@
-# Aloha: A Low-Cost Hardware for Bimanual Teleoperation
+# [Aloha: A Low-Cost Hardware for Bimanual Teleoperation](https://www.trossenrobotics.com/aloha-stationary)
 # https://aloha-2.github.io
-# https://www.trossenrobotics.com/aloha-stationary
 
 # Requires installing extras packages
 # With pip: `pip install -e ".[dynamixel intelrealsense]"`
 # With poetry: `poetry install --sync --extras "dynamixel intelrealsense"`
 
+# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/9_use_aloha.md)
+
+
 _target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
 robot_type: aloha
 # Specific to Aloha, LeRobot comes with default calibration files. Assuming the motors have been

lerobot/configs/robot/koch_bimanual.yaml

@@ -1,5 +1,5 @@
 _target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
-robot_type: koch
+robot_type: koch_bimanual
 calibration_dir: .cache/calibration/koch_bimanual
 
 # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.

lerobot/configs/robot/moss.yaml

@@ -0,0 +1,56 @@
+# [Moss v1 robot arm](https://github.com/jess-moss/moss-robot-arms)
+
+# Requires installing extras packages
+# With pip: `pip install -e ".[feetech]"`
+# With poetry: `poetry install --sync --extras "feetech"`
+
+# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/11_use_moss.md)
+
+_target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
+robot_type: moss
+calibration_dir: .cache/calibration/moss
+
+# `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+# Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+# the number of motors in your follower arms.
+max_relative_target: null
+
+leader_arms:
+  main:
+    _target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
+    port: /dev/tty.usbmodem58760431091
+    motors:
+      # name: (index, model)
+      shoulder_pan: [1, "sts3215"]
+      shoulder_lift: [2, "sts3215"]
+      elbow_flex: [3, "sts3215"]
+      wrist_flex: [4, "sts3215"]
+      wrist_roll: [5, "sts3215"]
+      gripper: [6, "sts3215"]
+
+follower_arms:
+  main:
+    _target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
+    port: /dev/tty.usbmodem58760431191
+    motors:
+      # name: (index, model)
+      shoulder_pan: [1, "sts3215"]
+      shoulder_lift: [2, "sts3215"]
+      elbow_flex: [3, "sts3215"]
+      wrist_flex: [4, "sts3215"]
+      wrist_roll: [5, "sts3215"]
+      gripper: [6, "sts3215"]
+
+cameras:
+  laptop:
+    _target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
+    camera_index: 0
+    fps: 30
+    width: 640
+    height: 480
+  phone:
+    _target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
+    camera_index: 1
+    fps: 30
+    width: 640
+    height: 480

lerobot/configs/robot/so100.yaml

@@ -0,0 +1,56 @@
+# [SO-100 robot arm](https://github.com/TheRobotStudio/SO-ARM100)
+
+# Requires installing extras packages
+# With pip: `pip install -e ".[feetech]"`
+# With poetry: `poetry install --sync --extras "feetech"`
+
+# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md)
+
+_target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
+robot_type: so100
+calibration_dir: .cache/calibration/so100
+
+# `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+# Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+# the number of motors in your follower arms.
+max_relative_target: null
+
+leader_arms:
+  main:
+    _target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
+    port: /dev/tty.usbmodem585A0077581
+    motors:
+      # name: (index, model)
+      shoulder_pan: [1, "sts3215"]
+      shoulder_lift: [2, "sts3215"]
+      elbow_flex: [3, "sts3215"]
+      wrist_flex: [4, "sts3215"]
+      wrist_roll: [5, "sts3215"]
+      gripper: [6, "sts3215"]
+
+follower_arms:
+  main:
+    _target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
+    port: /dev/tty.usbmodem585A0080971
+    motors:
+      # name: (index, model)
+      shoulder_pan: [1, "sts3215"]
+      shoulder_lift: [2, "sts3215"]
+      elbow_flex: [3, "sts3215"]
+      wrist_flex: [4, "sts3215"]
+      wrist_roll: [5, "sts3215"]
+      gripper: [6, "sts3215"]
+
+cameras:
+  laptop:
+    _target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
+    camera_index: 0
+    fps: 30
+    width: 640
+    height: 480
+  phone:
+    _target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
+    camera_index: 1
+    fps: 30
+    width: 640
+    height: 480

lerobot/configs/robot/stretch.yaml

@@ -1,3 +1,12 @@
+# [Stretch3 from Hello Robot](https://hello-robot.com/stretch-3-product)
+
+# Requires installing extras packages
+# With pip: `pip install -e ".[stretch]"`
+# With poetry: `poetry install --sync --extras "stretch"`
+
+# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/8_use_stretch.md)
+
+
 _target_: lerobot.common.robot_devices.robots.stretch.StretchRobot
 robot_type: stretch3