hangX/lerobot
1
0
Fork 0
forked from tangger/lerobot
Code Pull Requests Activity

Refactor to have dynamixel_calibration and feetech_calibration

Browse Source
This commit is contained in:
Remi Cadene
2024-10-18 11:31:37 +02:00
parent 1990f9c9bc
commit 994209d1b0
14 changed files with 594 additions and 186 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
lerobot/common/robot_devices/motors/dynamixel.py
View File

@@ -260,7 +260,7 @@ class DynamixelMotorsBus:
A DynamixelMotorsBus instance requires a port (e.g. `DynamixelMotorsBus(port="/dev/tty.usbmodem575E0031751"`)).
To find the port, you can run our utility script:
```bash
python lerobot/common/robot_devices/motors/dynamixel.py
python lerobot/scripts/find_motors_bus_port.py
>>> Finding all available ports for the DynamixelMotorsBus.
>>> ['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
>>> Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
@@ -339,7 +339,7 @@ class DynamixelMotorsBus:
except Exception:
traceback.print_exc()
print(
"\nTry running `python lerobot/common/robot_devices/motors/dynamixel.py` to make sure you are using the correct port.\n"
"\nTry running `python lerobot/scripts/find_motors_bus_port.py` to make sure you are using the correct port.\n"
)
raise

6
lerobot/common/robot_devices/motors/feetech.py
View File

@@ -45,6 +45,8 @@ UPPER_BOUND_LINEAR = 110
HALF_TURN_DEGREE = 180
# See this link for STS3215 Memory Table:
# https://docs.google.com/spreadsheets/d/1GVs7W1VS1PqdhA1nW-abeyAHhTUxKUdR/edit?usp=sharing&ouid=116566590112741600240&rtpof=true&sd=true
# data_name: (address, size_byte)
SCS_SERIES_CONTROL_TABLE = {
"Model": (3, 2),
@@ -325,7 +327,7 @@ class FeetechMotorsBus:
except Exception:
traceback.print_exc()
print(
"\nTry running `python lerobot/common/robot_devices/motors/feetech.py` to make sure you are using the correct port.\n"
"\nTry running `python lerobot/scripts/find_motors_bus_port.py` to make sure you are using the correct port.\n"
)
raise
@@ -740,8 +742,6 @@ class FeetechMotorsBus:
if data_name in CONVERT_UINT32_TO_INT32_REQUIRED:
values = values.astype(np.int32)
print(values)
if data_name in CALIBRATION_REQUIRED:
values = self.avoid_rotation_reset(values, motor_names, data_name)

131
lerobot/common/robot_devices/robots/dynamixel_calibration.py Normal file
View File

@@ -0,0 +1,131 @@
"""Logic to calibrate a robot arm built with dynamixel motors"""
# TODO(rcadene, aliberts): move this logic into the robot code when refactoring
import numpy as np
from lerobot.common.robot_devices.motors.dynamixel import (
CalibrationMode,
TorqueMode,
convert_degrees_to_steps,
)
from lerobot.common.robot_devices.motors.utils import MotorsBus
URL_TEMPLATE = (
"https://raw.githubusercontent.com/huggingface/lerobot/main/media/{robot}/{arm}_{position}.webp"
)
# The following positions are provided in nominal degree range ]-180, +180[
# For more info on these constants, see comments in the code where they get used.
ZERO_POSITION_DEGREE = 0
ROTATED_POSITION_DEGREE = 90
def assert_drive_mode(drive_mode):
# `drive_mode` is in [0,1] with 0 means original rotation direction for the motor, and 1 means inverted.
if not np.all(np.isin(drive_mode, [0, 1])):
raise ValueError(f"`drive_mode` contains values other than 0 or 1: ({drive_mode})")
def apply_drive_mode(position, drive_mode):
assert_drive_mode(drive_mode)
# Convert `drive_mode` from [0, 1] with 0 indicates original rotation direction and 1 inverted,
# to [-1, 1] with 1 indicates original rotation direction and -1 inverted.
signed_drive_mode = -(drive_mode * 2 - 1)
position *= signed_drive_mode
return position
def compute_nearest_rounded_position(position, models):
# delta_turn = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, models)
# nearest_pos = np.round(position.astype(float) / delta_turn) * delta_turn
# return nearest_pos.astype(position.dtype)
return position
def run_arm_calibration(arm: MotorsBus, robot_type: str, arm_name: str, arm_type: str):
"""This function ensures that a neural network trained on data collected on a given robot
can work on another robot. For instance before calibration, setting a same goal position
for each motor of two different robots will get two very different positions. But after calibration,
the two robots will move to the same position.To this end, this function computes the homing offset
and the drive mode for each motor of a given robot.
Homing offset is used to shift the motor position to a ]-2048, +2048[ nominal range (when the motor uses 2048 steps
to complete a half a turn). This range is set around an arbitrary "zero position" corresponding to all motor positions
being 0. During the calibration process, you will need to manually move the robot to this "zero position".
Drive mode is used to invert the rotation direction of the motor. This is useful when some motors have been assembled
in the opposite orientation for some robots. During the calibration process, you will need to manually move the robot
to the "rotated position".
After calibration, the homing offsets and drive modes are stored in a cache.
Example of usage:
```python
run_arm_calibration(arm, "koch", "left", "follower")
```
"""
if (arm.read("Torque_Enable") != TorqueMode.DISABLED.value).any():
raise ValueError("To run calibration, the torque must be disabled on all motors.")
print(f"\nRunning calibration of {robot_type} {arm_name} {arm_type}...")
print("\nMove arm to zero position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="zero"))
input("Press Enter to continue...")
# We arbitrarily chose our zero target position to be a straight horizontal position with gripper upwards and closed.
# It is easy to identify and all motors are in a "quarter turn" position. Once calibration is done, this position will
# correspond to every motor angle being 0. If you set all 0 as Goal Position, the arm will move in this position.
zero_target_pos = convert_degrees_to_steps(ZERO_POSITION_DEGREE, arm.motor_models)
# Compute homing offset so that `present_position + homing_offset ~= target_position`.
zero_pos = arm.read("Present_Position")
zero_nearest_pos = compute_nearest_rounded_position(zero_pos, arm.motor_models)
homing_offset = zero_target_pos - zero_nearest_pos
# The rotated target position corresponds to a rotation of a quarter turn from the zero position.
# This allows to identify the rotation direction of each motor.
# For instance, if the motor rotates 90 degree, and its value is -90 after applying the homing offset, then we know its rotation direction
# is inverted. However, for the calibration being successful, we need everyone to follow the same target position.
# Sometimes, there is only one possible rotation direction. For instance, if the gripper is closed, there is only one direction which
# corresponds to opening the gripper. When the rotation direction is ambiguous, we arbitrarely rotate clockwise from the point of view
# of the previous motor in the kinetic chain.
print("\nMove arm to rotated target position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rotated"))
input("Press Enter to continue...")
rotated_target_pos = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, arm.motor_models)
# Find drive mode by rotating each motor by a quarter of a turn.
# Drive mode indicates if the motor rotation direction should be inverted (=1) or not (=0).
rotated_pos = arm.read("Present_Position")
drive_mode = (rotated_pos < zero_pos).astype(np.int32)
# Re-compute homing offset to take into account drive mode
rotated_drived_pos = apply_drive_mode(rotated_pos, drive_mode)
rotated_nearest_pos = compute_nearest_rounded_position(rotated_drived_pos, arm.motor_models)
homing_offset = rotated_target_pos - rotated_nearest_pos
print("\nMove arm to rest position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rest"))
input("Press Enter to continue...")
print()
# Joints with rotational motions are expressed in degrees in nominal range of [-180, 180]
calib_mode = [CalibrationMode.DEGREE.name] * len(arm.motor_names)
# TODO(rcadene): make type of joints (DEGREE or LINEAR) configurable from yaml?
if robot_type in ["aloha"] and "gripper" in arm.motor_names:
# Joints with linear motions (like gripper of Aloha) are experessed in nominal range of [0, 100]
calib_idx = arm.motor_names.index("gripper")
calib_mode[calib_idx] = CalibrationMode.LINEAR.name
calib_data = {
"homing_offset": homing_offset.tolist(),
"drive_mode": drive_mode.tolist(),
"start_pos": zero_pos.tolist(),
"end_pos": rotated_pos.tolist(),
"calib_mode": calib_mode,
"motor_names": arm.motor_names,
}
return calib_data

131
lerobot/common/robot_devices/robots/feetech_calibration.py Normal file
View File

@@ -0,0 +1,131 @@
"""Logic to calibrate a robot arm built with feetech motors"""
# TODO(rcadene, aliberts): move this logic into the robot code when refactoring
import numpy as np
from lerobot.common.robot_devices.motors.feetech import (
CalibrationMode,
TorqueMode,
convert_degrees_to_steps,
)
from lerobot.common.robot_devices.motors.utils import MotorsBus
URL_TEMPLATE = (
"https://raw.githubusercontent.com/huggingface/lerobot/main/media/{robot}/{arm}_{position}.webp"
)
# The following positions are provided in nominal degree range ]-180, +180[
# For more info on these constants, see comments in the code where they get used.
ZERO_POSITION_DEGREE = 0
ROTATED_POSITION_DEGREE = 90
def assert_drive_mode(drive_mode):
# `drive_mode` is in [0,1] with 0 means original rotation direction for the motor, and 1 means inverted.
if not np.all(np.isin(drive_mode, [0, 1])):
raise ValueError(f"`drive_mode` contains values other than 0 or 1: ({drive_mode})")
def apply_drive_mode(position, drive_mode):
assert_drive_mode(drive_mode)
# Convert `drive_mode` from [0, 1] with 0 indicates original rotation direction and 1 inverted,
# to [-1, 1] with 1 indicates original rotation direction and -1 inverted.
signed_drive_mode = -(drive_mode * 2 - 1)
position *= signed_drive_mode
return position
def compute_nearest_rounded_position(position, models):
# delta_turn = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, models)
# nearest_pos = np.round(position.astype(float) / delta_turn) * delta_turn
# return nearest_pos.astype(position.dtype)
return position
def run_arm_calibration(arm: MotorsBus, robot_type: str, arm_name: str, arm_type: str):
"""This function ensures that a neural network trained on data collected on a given robot
can work on another robot. For instance before calibration, setting a same goal position
for each motor of two different robots will get two very different positions. But after calibration,
the two robots will move to the same position.To this end, this function computes the homing offset
and the drive mode for each motor of a given robot.
Homing offset is used to shift the motor position to a ]-2048, +2048[ nominal range (when the motor uses 2048 steps
to complete a half a turn). This range is set around an arbitrary "zero position" corresponding to all motor positions
being 0. During the calibration process, you will need to manually move the robot to this "zero position".
Drive mode is used to invert the rotation direction of the motor. This is useful when some motors have been assembled
in the opposite orientation for some robots. During the calibration process, you will need to manually move the robot
to the "rotated position".
After calibration, the homing offsets and drive modes are stored in a cache.
Example of usage:
```python
run_arm_calibration(arm, "koch", "left", "follower")
```
"""
if (arm.read("Torque_Enable") != TorqueMode.DISABLED.value).any():
raise ValueError("To run calibration, the torque must be disabled on all motors.")
print(f"\nRunning calibration of {robot_type} {arm_name} {arm_type}...")
print("\nMove arm to zero position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="zero"))
input("Press Enter to continue...")
# We arbitrarily chose our zero target position to be a straight horizontal position with gripper upwards and closed.
# It is easy to identify and all motors are in a "quarter turn" position. Once calibration is done, this position will
# correspond to every motor angle being 0. If you set all 0 as Goal Position, the arm will move in this position.
zero_target_pos = convert_degrees_to_steps(ZERO_POSITION_DEGREE, arm.motor_models)
# Compute homing offset so that `present_position + homing_offset ~= target_position`.
zero_pos = arm.read("Present_Position")
zero_nearest_pos = compute_nearest_rounded_position(zero_pos, arm.motor_models)
homing_offset = zero_target_pos - zero_nearest_pos
# The rotated target position corresponds to a rotation of a quarter turn from the zero position.
# This allows to identify the rotation direction of each motor.
# For instance, if the motor rotates 90 degree, and its value is -90 after applying the homing offset, then we know its rotation direction
# is inverted. However, for the calibration being successful, we need everyone to follow the same target position.
# Sometimes, there is only one possible rotation direction. For instance, if the gripper is closed, there is only one direction which
# corresponds to opening the gripper. When the rotation direction is ambiguous, we arbitrarely rotate clockwise from the point of view
# of the previous motor in the kinetic chain.
print("\nMove arm to rotated target position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rotated"))
input("Press Enter to continue...")
rotated_target_pos = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, arm.motor_models)
# Find drive mode by rotating each motor by a quarter of a turn.
# Drive mode indicates if the motor rotation direction should be inverted (=1) or not (=0).
rotated_pos = arm.read("Present_Position")
drive_mode = (rotated_pos < zero_pos).astype(np.int32)
# Re-compute homing offset to take into account drive mode
rotated_drived_pos = apply_drive_mode(rotated_pos, drive_mode)
rotated_nearest_pos = compute_nearest_rounded_position(rotated_drived_pos, arm.motor_models)
homing_offset = rotated_target_pos - rotated_nearest_pos
print("\nMove arm to rest position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rest"))
input("Press Enter to continue...")
print()
# Joints with rotational motions are expressed in degrees in nominal range of [-180, 180]
calib_mode = [CalibrationMode.DEGREE.name] * len(arm.motor_names)
# TODO(rcadene): make type of joints (DEGREE or LINEAR) configurable from yaml?
if robot_type in ["so100", "moss"] and "gripper" in arm.motor_names:
# Joints with linear motions (like gripper of Aloha) are experessed in nominal range of [0, 100]
calib_idx = arm.motor_names.index("gripper")
calib_mode[calib_idx] = CalibrationMode.LINEAR.name
calib_data = {
"homing_offset": homing_offset.tolist(),
"drive_mode": drive_mode.tolist(),
"start_pos": zero_pos.tolist(),
"end_pos": rotated_pos.tolist(),
"calib_mode": calib_mode,
"motor_names": arm.motor_names,
}
return calib_data

192
lerobot/common/robot_devices/robots/manipulator.py
View File

@@ -1,3 +1,9 @@
"""Contains logic to instantiate a robot, read information from its motors and cameras,
and send orders to its motors.
"""
# TODO(rcadene, aliberts): reorganize the codebase into one file per robot, with the associated
# calibration procedure, to make it easy for people to add their own robot.
import json
import logging
import time
@@ -10,139 +16,10 @@ import numpy as np
import torch
from lerobot.common.robot_devices.cameras.utils import Camera
from lerobot.common.robot_devices.motors.feetech import (
CalibrationMode,
TorqueMode,
convert_degrees_to_steps,
)
from lerobot.common.robot_devices.motors.utils import MotorsBus
from lerobot.common.robot_devices.robots.utils import get_arm_id
from lerobot.common.robot_devices.utils import RobotDeviceAlreadyConnectedError, RobotDeviceNotConnectedError
########################################################################
# Calibration logic
########################################################################
URL_TEMPLATE = (
"https://raw.githubusercontent.com/huggingface/lerobot/main/media/{robot}/{arm}_{position}.webp"
)
# The following positions are provided in nominal degree range ]-180, +180[
# For more info on these constants, see comments in the code where they get used.
ZERO_POSITION_DEGREE = 0
ROTATED_POSITION_DEGREE = 90
def assert_drive_mode(drive_mode):
# `drive_mode` is in [0,1] with 0 means original rotation direction for the motor, and 1 means inverted.
if not np.all(np.isin(drive_mode, [0, 1])):
raise ValueError(f"`drive_mode` contains values other than 0 or 1: ({drive_mode})")
def apply_drive_mode(position, drive_mode):
assert_drive_mode(drive_mode)
# Convert `drive_mode` from [0, 1] with 0 indicates original rotation direction and 1 inverted,
# to [-1, 1] with 1 indicates original rotation direction and -1 inverted.
signed_drive_mode = -(drive_mode * 2 - 1)
position *= signed_drive_mode
return position
def compute_nearest_rounded_position(position, models):
# delta_turn = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, models)
# nearest_pos = np.round(position.astype(float) / delta_turn) * delta_turn
# return nearest_pos.astype(position.dtype)
return position
def run_arm_calibration(arm: MotorsBus, robot_type: str, arm_name: str, arm_type: str):
"""This function ensures that a neural network trained on data collected on a given robot
can work on another robot. For instance before calibration, setting a same goal position
for each motor of two different robots will get two very different positions. But after calibration,
the two robots will move to the same position.To this end, this function computes the homing offset
and the drive mode for each motor of a given robot.
Homing offset is used to shift the motor position to a ]-2048, +2048[ nominal range (when the motor uses 2048 steps
to complete a half a turn). This range is set around an arbitrary "zero position" corresponding to all motor positions
being 0. During the calibration process, you will need to manually move the robot to this "zero position".
Drive mode is used to invert the rotation direction of the motor. This is useful when some motors have been assembled
in the opposite orientation for some robots. During the calibration process, you will need to manually move the robot
to the "rotated position".
After calibration, the homing offsets and drive modes are stored in a cache.
Example of usage:
```python
run_arm_calibration(arm, "koch", "left", "follower")
```
"""
if (arm.read("Torque_Enable") != TorqueMode.DISABLED.value).any():
raise ValueError("To run calibration, the torque must be disabled on all motors.")
print(f"\nRunning calibration of {robot_type} {arm_name} {arm_type}...")
print("\nMove arm to zero position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="zero"))
input("Press Enter to continue...")
# We arbitrarily chose our zero target position to be a straight horizontal position with gripper upwards and closed.
# It is easy to identify and all motors are in a "quarter turn" position. Once calibration is done, this position will
# correspond to every motor angle being 0. If you set all 0 as Goal Position, the arm will move in this position.
zero_target_pos = convert_degrees_to_steps(ZERO_POSITION_DEGREE, arm.motor_models)
# Compute homing offset so that `present_position + homing_offset ~= target_position`.
zero_pos = arm.read("Present_Position")
zero_nearest_pos = compute_nearest_rounded_position(zero_pos, arm.motor_models)
homing_offset = zero_target_pos - zero_nearest_pos
# The rotated target position corresponds to a rotation of a quarter turn from the zero position.
# This allows to identify the rotation direction of each motor.
# For instance, if the motor rotates 90 degree, and its value is -90 after applying the homing offset, then we know its rotation direction
# is inverted. However, for the calibration being successful, we need everyone to follow the same target position.
# Sometimes, there is only one possible rotation direction. For instance, if the gripper is closed, there is only one direction which
# corresponds to opening the gripper. When the rotation direction is ambiguous, we arbitrarely rotate clockwise from the point of view
# of the previous motor in the kinetic chain.
print("\nMove arm to rotated target position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rotated"))
input("Press Enter to continue...")
rotated_target_pos = convert_degrees_to_steps(ROTATED_POSITION_DEGREE, arm.motor_models)
# Find drive mode by rotating each motor by a quarter of a turn.
# Drive mode indicates if the motor rotation direction should be inverted (=1) or not (=0).
rotated_pos = arm.read("Present_Position")
drive_mode = (rotated_pos < zero_pos).astype(np.int32)
# Re-compute homing offset to take into account drive mode
rotated_drived_pos = apply_drive_mode(rotated_pos, drive_mode)
rotated_nearest_pos = compute_nearest_rounded_position(rotated_drived_pos, arm.motor_models)
homing_offset = rotated_target_pos - rotated_nearest_pos
print("\nMove arm to rest position")
print("See: " + URL_TEMPLATE.format(robot=robot_type, arm=arm_type, position="rest"))
input("Press Enter to continue...")
print()
# Joints with rotational motions are expressed in degrees in nominal range of [-180, 180]
calib_mode = [CalibrationMode.DEGREE.name] * len(arm.motor_names)
# TODO(rcadene): make type of joints (DEGREE or LINEAR) configurable from yaml?
if robot_type in ["aloha", "so_100"] and "gripper" in arm.motor_names:
# Joints with linear motions (like gripper of Aloha) are experessed in nominal range of [0, 100]
calib_idx = arm.motor_names.index("gripper")
calib_mode[calib_idx] = CalibrationMode.LINEAR.name
calib_data = {
"homing_offset": homing_offset.tolist(),
"drive_mode": drive_mode.tolist(),
"start_pos": zero_pos.tolist(),
"end_pos": rotated_pos.tolist(),
"calib_mode": calib_mode,
"motor_names": arm.motor_names,
}
return calib_data
def ensure_safe_goal_position(
goal_pos: torch.Tensor, present_pos: torch.Tensor, max_relative_target: float | list[float]
@@ -164,11 +41,6 @@ def ensure_safe_goal_position(
return safe_goal_pos
########################################################################
# Manipulator robot
########################################################################
@dataclass
class ManipulatorRobotConfig:
"""
@@ -179,7 +51,7 @@ class ManipulatorRobotConfig:
"""
# Define all components of the robot
robot_type: str | None = None
robot_type: str = "koch"
leader_arms: dict[str, MotorsBus] = field(default_factory=lambda: {})
follower_arms: dict[str, MotorsBus] = field(default_factory=lambda: {})
cameras: dict[str, Camera] = field(default_factory=lambda: {})
@@ -208,6 +80,10 @@ class ManipulatorRobotConfig:
)
super().__setattr__(prop, val)
def __post_init__(self):
if self.robot_type not in ["koch", "aloha", "so100", "moss"]:
raise ValueError(f"Provided robot type ({self.robot_type}) is not supported.")
class ManipulatorRobot:
# TODO(rcadene): Implement force feedback
@@ -388,6 +264,11 @@ class ManipulatorRobot:
print(f"Connecting {name} leader arm.")
self.leader_arms[name].connect()
if self.robot_type in ["koch", "aloha"]:
from lerobot.common.robot_devices.motors.dynamixel import TorqueMode
elif self.robot_type in ["so100", "moss"]:
from lerobot.common.robot_devices.motors.feetech import TorqueMode
# We assume that at connection time, arms are in a rest position, and torque can
# be safely disabled to run calibration and/or set robot preset configurations.
for name in self.follower_arms:
@@ -402,10 +283,8 @@ class ManipulatorRobot:
self.set_koch_robot_preset()
elif self.robot_type == "aloha":
self.set_aloha_robot_preset()
elif self.robot_type == "so_100":
self.set_so_100_robot_preset()
else:
warnings.warn(f"No preset found for robot type: {self.robot_type}", stacklevel=1)
elif self.robot_type in ["so100", "moss"]:
self.set_so100_robot_preset()
# Enable torque on all motors of the follower arms
for name in self.follower_arms:
@@ -413,6 +292,10 @@ class ManipulatorRobot:
self.follower_arms[name].write("Torque_Enable", 1)
if self.config.gripper_open_degree is not None:
if self.robot_type in ["aloha", "so100", "moss"]:
raise NotImplementedError(
f"{self.robot_type} does not support position AND current control in the handle, which is require to set the gripper open."
)
# Set the leader arm in torque mode with the gripper motor set to an angle. This makes it possible
# to squeeze the gripper and have it spring back to an open position on its own.
for name in self.leader_arms:
@@ -446,6 +329,12 @@ class ManipulatorRobot:
calibration = json.load(f)
else:
print(f"Missing calibration file '{arm_calib_path}'")
if self.robot_type in ["koch", "aloha"]:
from lerobot.common.robot_devices.robots.dynamixel_calibration import run_arm_calibration
elif self.robot_type in ["so100", "moss"]:
from lerobot.common.robot_devices.robots.feetech_calibration import run_arm_calibration
calibration = run_arm_calibration(arm, self.robot_type, name, arm_type)
print(f"Calibration is done! Saving calibration file '{arm_calib_path}'")
@@ -464,6 +353,8 @@ class ManipulatorRobot:
def set_koch_robot_preset(self):
def set_operating_mode_(arm):
from lerobot.common.robot_devices.motors.dynamixel import TorqueMode
if (arm.read("Torque_Enable") != TorqueMode.DISABLED.value).any():
raise ValueError("To run set robot preset, the torque must be disabled on all motors.")
@@ -551,24 +442,21 @@ class ManipulatorRobot:
stacklevel=1,
)
def set_so_100_robot_preset(self):
def set_so100_robot_preset(self):
for name in self.follower_arms:
# Mode=0 for Position Control
self.follower_arms[name].write("Mode", 0)
# self.follower_arms[name].write("P_Coefficient", 255, "shoulder_pan")
# Set P_Coefficient to lower value to avoid shakiness (Default is 32)
self.follower_arms[name].write("P_Coefficient", 16, "shoulder_pan")
# self.follower_arms[name].write("D_Coefficient", 230, "shoulder_pan")
# Set I_Coefficient and D_Coefficient to default value 0 and 32
self.follower_arms[name].write("I_Coefficient", 0, "shoulder_pan")
self.follower_arms[name].write("D_Coefficient", 32, "shoulder_pan")
# self.follower_arms[name].write("Acceleration", 0)
# self.follower_arms[name].write("Minimum_Startup_Force", 0)
# Close the write lock so that Maximum_Acceleration gets written to EPROM address,
# which is mandatory for Maximum_Acceleration to take effect after rebooting.
self.follower_arms[name].write("Lock", 0)
# self.follower_arms[name].write("Maximum_Acceleration", 250)
self.follower_arms[name].write("Maximum_Acceleration", 150)
# for name in self.leader_arms:
# self.leader_arms[name].write("Max_Torque_Limit", 50, "gripper")
# self.leader_arms[name].write("Torque_Limit", 1000, "gripper")
# self.leader_arms[name].write("Torque_Enable", 1, "gripper")
# self.leader_arms[name].write("Goal_Position", 2048, "gripper")
# Set Maximum_Acceleration to 250 to speedup acceleration and deceleration of
# the motors. Note: this configuration is not in the official STS3215 Memory Table
self.follower_arms[name].write("Maximum_Acceleration", 250)
def teleop_step(
self, record_data=False

6
lerobot/configs/robot/aloha.yaml
View File

@@ -1,11 +1,13 @@
# Aloha: A Low-Cost Hardware for Bimanual Teleoperation
# [Aloha: A Low-Cost Hardware for Bimanual Teleoperation](https://www.trossenrobotics.com/aloha-stationary)
# https://aloha-2.github.io
# https://www.trossenrobotics.com/aloha-stationary
# Requires installing extras packages
# With pip: `pip install -e ".[dynamixel intelrealsense]"`
# With poetry: `poetry install --sync --extras "dynamixel intelrealsense"`
# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/9_use_aloha.md)
_target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
robot_type: aloha
# Specific to Aloha, LeRobot comes with default calibration files. Assuming the motors have been

17
lerobot/configs/robot/so_100.yaml → lerobot/configs/robot/moss.yaml
View File

@@ -1,6 +1,14 @@
# [Moss v1 robot arm](https://github.com/jess-moss/moss-robot-arms)
# Requires installing extras packages
# With pip: `pip install -e ".[feetech]"`
# With poetry: `poetry install --sync --extras "feetech"`
# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/11_use_moss.md)
_target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
robot_type: so_100
calibration_dir: .cache/calibration/so_100
robot_type: moss
calibration_dir: .cache/calibration/moss
# `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
# Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
@@ -46,8 +54,3 @@ cameras:
fps: 30
width: 640
height: 480
# ~ Koch specific settings ~
# Sets the leader arm in torque mode with the gripper motor set to this angle. This makes it possible
# to squeeze the gripper and have it spring back to an open position on its own.
# gripper_open_degree: 35.156

56
lerobot/configs/robot/so100.yaml Normal file
View File

@@ -0,0 +1,56 @@
# [SO-100 robot arm](https://github.com/TheRobotStudio/SO-ARM100)
# Requires installing extras packages
# With pip: `pip install -e ".[feetech]"`
# With poetry: `poetry install --sync --extras "feetech"`
# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md)
_target_: lerobot.common.robot_devices.robots.manipulator.ManipulatorRobot
robot_type: so100
calibration_dir: .cache/calibration/so100
# `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
# Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
# the number of motors in your follower arms.
max_relative_target: null
leader_arms:
main:
_target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
port: /dev/tty.usbmodem585A0077581
motors:
# name: (index, model)
shoulder_pan: [1, "sts3215"]
shoulder_lift: [2, "sts3215"]
elbow_flex: [3, "sts3215"]
wrist_flex: [4, "sts3215"]
wrist_roll: [5, "sts3215"]
gripper: [6, "sts3215"]
follower_arms:
main:
_target_: lerobot.common.robot_devices.motors.feetech.FeetechMotorsBus
port: /dev/tty.usbmodem585A0080971
motors:
# name: (index, model)
shoulder_pan: [1, "sts3215"]
shoulder_lift: [2, "sts3215"]
elbow_flex: [3, "sts3215"]
wrist_flex: [4, "sts3215"]
wrist_roll: [5, "sts3215"]
gripper: [6, "sts3215"]
cameras:
laptop:
_target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
camera_index: 0
fps: 30
width: 640
height: 480
phone:
_target_: lerobot.common.robot_devices.cameras.opencv.OpenCVCamera
camera_index: 1
fps: 30
width: 640
height: 480

9
lerobot/configs/robot/stretch.yaml
View File

@@ -1,3 +1,12 @@
# [Stretch3 from Hello Robot](https://hello-robot.com/stretch-3-product)
# Requires installing extras packages
# With pip: `pip install -e ".[stretch]"`
# With poetry: `poetry install --sync --extras "stretch"`
# See [tutorial](https://github.com/huggingface/lerobot/blob/main/examples/8_use_stretch.md)
_target_: lerobot.common.robot_devices.robots.stretch.StretchRobot
robot_type: stretch3

35
lerobot/scripts/configure_motor.py
View File

@@ -18,26 +18,26 @@ import time
def configure_motor(port, brand, model, motor_idx_des, baudrate_des):
if brand == "feetech":
from lerobot.common.robot_devices.motors.feetech import MODEL_BAUDRATE_TABLE as model_baud_rate_table
from lerobot.common.robot_devices.motors.feetech import NUM_WRITE_RETRY as num_write_retry
from lerobot.common.robot_devices.motors.feetech import SCS_SERIES_BAUDRATE_TABLE as baudrate_table
from lerobot.common.robot_devices.motors.feetech import FeetechMotorsBus as motor_bus_class
elif brand == "dynamixel":
from lerobot.common.robot_devices.motors.dynamixel import (
MODEL_BAUDRATE_TABLE as model_baud_rate_table,
from lerobot.common.robot_devices.motors.feetech import MODEL_BAUDRATE_TABLE, NUM_WRITE_RETRY
from lerobot.common.robot_devices.motors.feetech import (
SCS_SERIES_BAUDRATE_TABLE as SERIES_BAUDRATE_TABLE,
)
from lerobot.common.robot_devices.motors.dynamixel import NUM_WRITE_RETRY as num_write_retry
from lerobot.common.robot_devices.motors.dynamixel import X_SERIES_BAUDRATE_TABLE as baudrate_table
from lerobot.common.robot_devices.motors.dynamixel import DynamixelMotorsBus as motor_bus_class
from lerobot.common.robot_devices.motors.feetech import FeetechMotorsBus as MotorsBusClass
elif brand == "dynamixel":
from lerobot.common.robot_devices.motors.dynamixel import MODEL_BAUDRATE_TABLE, NUM_WRITE_RETRY
from lerobot.common.robot_devices.motors.dynamixel import (
X_SERIES_BAUDRATE_TABLE as SERIES_BAUDRATE_TABLE,
)
from lerobot.common.robot_devices.motors.dynamixel import DynamixelMotorsBus as MotorsBusClass
else:
raise ValueError(
f"Currently we do not support this motor brand: {brand}. We currently support feetech and dynamixel motors."
)
# Check if the provided model exists in the model_baud_rate_table
if model not in model_baud_rate_table:
if model not in MODEL_BAUDRATE_TABLE:
raise ValueError(
f"Invalid model '{model}' for brand '{brand}'. Supported models: {list(model_baud_rate_table.keys())}"
f"Invalid model '{model}' for brand '{brand}'. Supported models: {list(MODEL_BAUDRATE_TABLE.keys())}"
)
# Setup motor names, indices, and models
@@ -46,7 +46,7 @@ def configure_motor(port, brand, model, motor_idx_des, baudrate_des):
motor_model = model # Use the motor model passed via argument
# Initialize the MotorBus with the correct port and motor configurations
motor_bus = motor_bus_class(port=port, motors={motor_name: (motor_index_arbitrary, motor_model)})
motor_bus = MotorsBusClass(port=port, motors={motor_name: (motor_index_arbitrary, motor_model)})
# Try to connect to the motor bus and handle any connection-specific errors
try:
@@ -59,7 +59,7 @@ def configure_motor(port, brand, model, motor_idx_des, baudrate_des):
# Motor bus is connected, proceed with the rest of the operations
try:
print("Scanning all baudrates and motor indices")
all_baudrates = set(baudrate_table.values())
all_baudrates = set(SERIES_BAUDRATE_TABLE.values())
motor_index = -1 # Set the motor index to an out-of-range value.
for baudrate in all_baudrates:
@@ -84,10 +84,10 @@ def configure_motor(port, brand, model, motor_idx_des, baudrate_des):
if baudrate != baudrate_des:
print(f"Setting its baudrate to {baudrate_des}")
baudrate_idx = list(baudrate_table.values()).index(baudrate_des)
baudrate_idx = list(SERIES_BAUDRATE_TABLE.values()).index(baudrate_des)
# The write can fail, so we allow retries
for _ in range(num_write_retry):
for _ in range(NUM_WRITE_RETRY):
motor_bus.write_with_motor_ids(motor_bus.motor_models, motor_index, "Baud_Rate", baudrate_idx)
time.sleep(0.5)
motor_bus.set_bus_baudrate(baudrate_des)
@@ -124,7 +124,8 @@ def configure_motor(port, brand, model, motor_idx_des, baudrate_des):
time.sleep(4)
print("Offset", motor_bus.read("Offset"))
while True:
# Read present position for 15 seconds
for _ in range(30):
print("Present Position", motor_bus.read("Present_Position"))
time.sleep(0.5)