[skip ci] chore(pre-commit): bump python version from 3.10 to python3.12

.cache/calibration/aloha_default/left_follower.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2015,
+        3058,
+        3061,
+        1071,
+        1071,
+        2035,
+        2152,
+        2029,
+        2499
+    ],
+    "end_pos": [
+        -1008,
+        -1963,
+        -1966,
+        2141,
+        2143,
+        -971,
+        3043,
+        -1077,
+        3144
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/left_leader.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -1024
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2035,
+        3024,
+        3019,
+        979,
+        981,
+        1982,
+        2166,
+        2124,
+        1968
+    ],
+    "end_pos": [
+        -990,
+        -2017,
+        -2015,
+        2078,
+        2076,
+        -1030,
+        3117,
+        -1016,
+        2556
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/right_follower.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2056,
+        2895,
+        2896,
+        1191,
+        1190,
+        2018,
+        2051,
+        2056,
+        2509
+    ],
+    "end_pos": [
+        -1040,
+        -2004,
+        -2006,
+        2126,
+        2127,
+        -1010,
+        3050,
+        -1117,
+        3143
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/right_leader.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2068,
+        3034,
+        3030,
+        1038,
+        1041,
+        1991,
+        1948,
+        2090,
+        1985
+    ],
+    "end_pos": [
+        -1025,
+        -2014,
+        -2015,
+        2058,
+        2060,
+        -955,
+        3091,
+        -940,
+        2576
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.dockerignore

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # Misc
 .git
 tmp
@@ -73,7 +59,7 @@ pip-log.txt
 pip-delete-this-directory.txt
 
 # Unit test / coverage reports
-!tests/artifacts
+!tests/data
 htmlcov/
 .tox/
 .nox/

.gitattributes

@@ -1,21 +1,6 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
 *.memmap filter=lfs diff=lfs merge=lfs -text
 *.stl filter=lfs diff=lfs merge=lfs -text
 *.safetensors filter=lfs diff=lfs merge=lfs -text
 *.mp4 filter=lfs diff=lfs merge=lfs -text
 *.arrow filter=lfs diff=lfs merge=lfs -text
 *.json !text !filter !merge !diff
-tests/artifacts/cameras/*.png filter=lfs diff=lfs merge=lfs -text
-*.bag filter=lfs diff=lfs merge=lfs -text

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 name: "\U0001F41B Bug Report"
 description: Submit a bug report to help us improve LeRobot
 body:

.github/workflows/build-docker-images.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # Inspired by
 # https://github.com/huggingface/peft/blob/main/.github/workflows/build_docker_images.yml
 name: Builds
@@ -40,24 +26,24 @@ jobs:
           git lfs install
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@b5ca514318bd6ebac0fb2aedd5d36ec1b5c232a2 # v3.10.0
+        uses: docker/setup-buildx-action@v3
         with:
           cache-binary: false
 
       - name: Check out code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           lfs: true
           persist-credentials: false
 
       - name: Login to DockerHub
-        uses: docker/login-action@74a5d142397b4f367a81961eba4e8cd7edddf772 # v3.4.0
+        uses: docker/login-action@v3
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_PASSWORD }}
 
       - name: Build and Push CPU
-        uses: docker/build-push-action@ca052bb54ab0790a636c9b5f226502c73d547a25 # v5.4.0
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./docker/lerobot-cpu/Dockerfile
@@ -78,24 +64,24 @@ jobs:
           git lfs install
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@b5ca514318bd6ebac0fb2aedd5d36ec1b5c232a2 # v3.10.0
+        uses: docker/setup-buildx-action@v3
         with:
           cache-binary: false
 
       - name: Check out code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           lfs: true
           persist-credentials: false
 
       - name: Login to DockerHub
-        uses: docker/login-action@74a5d142397b4f367a81961eba4e8cd7edddf772 # v3.4.0
+        uses: docker/login-action@v3
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_PASSWORD }}
 
       - name: Build and Push GPU
-        uses: docker/build-push-action@ca052bb54ab0790a636c9b5f226502c73d547a25 # v5.4.0
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./docker/lerobot-gpu/Dockerfile
@@ -110,23 +96,23 @@ jobs:
       group: aws-general-8-plus
     steps:
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@b5ca514318bd6ebac0fb2aedd5d36ec1b5c232a2 # v3.10.0
+        uses: docker/setup-buildx-action@v3
         with:
           cache-binary: false
 
       - name: Check out code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: Login to DockerHub
-        uses: docker/login-action@74a5d142397b4f367a81961eba4e8cd7edddf772 # v3.4.0
+        uses: docker/login-action@v3
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_PASSWORD }}
 
       - name: Build and Push GPU dev
-        uses: docker/build-push-action@ca052bb54ab0790a636c9b5f226502c73d547a25 # v5.4.0
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./docker/lerobot-gpu-dev/Dockerfile

.github/workflows/build_documentation.yml

@@ -1,23 +0,0 @@
-name: Build documentation
-
-on:
-  workflow_dispatch:
-  push:
-    paths:
-      - "docs/**"
-    branches:
-    - main
-    - doc-builder*
-    - v*-release
-
-
-jobs:
-  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
-    uses: huggingface/doc-builder/.github/workflows/build_main_documentation.yml@main
-    with:
-      commit_sha: ${{ github.sha }}
-      package: lerobot
-      additional_args: --not_python_module
-    secrets:
-      token: ${{ secrets.HUGGINGFACE_PUSH }}
-      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}

.github/workflows/build_pr_documentation.yml

@@ -1,19 +0,0 @@
-name: Build PR Documentation
-
-on:
-  pull_request:
-    paths:
-      - "docs/**"
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
-    uses: huggingface/doc-builder/.github/workflows/build_pr_documentation.yml@main
-    with:
-      commit_sha: ${{ github.event.pull_request.head.sha }}
-      pr_number: ${{ github.event.number }}
-      package: lerobot
-      additional_args: --not_python_module

.github/workflows/nightly-tests.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # Inspired by
 # https://github.com/huggingface/peft/blob/main/.github/workflows/nightly.yml
 name: Nightly
@@ -33,7 +19,7 @@ jobs:
     runs-on:
       group: aws-general-8-plus
     container:
-      image: huggingface/lerobot-cpu:latest  # zizmor: ignore[unpinned-images]
+      image: huggingface/lerobot-cpu:latest
       options: --shm-size "16gb"
       credentials:
         username: ${{ secrets.DOCKERHUB_USERNAME }}
@@ -60,7 +46,7 @@ jobs:
       CUDA_VISIBLE_DEVICES: "0"
       TEST_TYPE: "single_gpu"
     container:
-      image: huggingface/lerobot-gpu:latest  # zizmor: ignore[unpinned-images]
+      image: huggingface/lerobot-gpu:latest
       options: --gpus all --shm-size "16gb"
       credentials:
         username: ${{ secrets.DOCKERHUB_USERNAME }}

.github/workflows/pr_style_bot.yml

@@ -0,0 +1,161 @@
+# Adapted from https://github.com/huggingface/diffusers/blob/main/.github/workflows/pr_style_bot.yml
+name: PR Style Bot
+
+on:
+  issue_comment:
+    types: [created]
+
+permissions: {}
+
+env:
+  PYTHON_VERSION: "3.10"
+
+jobs:
+  check-permissions:
+    if: >
+      contains(github.event.comment.body, '@bot /style') &&
+      github.event.issue.pull_request != null
+    runs-on: ubuntu-latest
+    outputs:
+      is_authorized: ${{ steps.check_user_permission.outputs.has_permission }}
+    steps:
+      - name: Check user permission
+        id: check_user_permission
+        uses: actions/github-script@v6
+        with:
+          script: |
+            const comment_user = context.payload.comment.user.login;
+            const { data: permission } = await github.rest.repos.getCollaboratorPermissionLevel({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              username: comment_user
+            });
+
+            const authorized =
+              permission.permission === 'admin' ||
+              permission.permission === 'write';
+
+            console.log(
+              `User ${comment_user} has permission level: ${permission.permission}, ` +
+              `authorized: ${authorized} (admins & maintainers allowed)`
+            );
+
+            core.setOutput('has_permission', authorized);
+
+  run-style-bot:
+    needs: check-permissions
+    if: needs.check-permissions.outputs.is_authorized == 'true'
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: write
+    steps:
+      - name: Extract PR details
+        id: pr_info
+        uses: actions/github-script@v6
+        with:
+          script: |
+            const prNumber = context.payload.issue.number;
+            const { data: pr } = await github.rest.pulls.get({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              pull_number: prNumber
+            });
+
+            // We capture both the branch ref and the "full_name" of the head repo
+            // so that we can check out the correct repository & branch (including forks).
+            core.setOutput("prNumber", prNumber);
+            core.setOutput("headRef", pr.head.ref);
+            core.setOutput("headRepoFullName", pr.head.repo.full_name);
+
+      - name: Check out PR branch
+        uses: actions/checkout@v4
+        env:
+          HEADREPOFULLNAME: ${{ steps.pr_info.outputs.headRepoFullName }}
+          HEADREF: ${{ steps.pr_info.outputs.headRef }}
+        with:
+          persist-credentials: true
+          # Instead of checking out the base repo, use the contributor's repo name
+          repository: ${{ env.HEADREPOFULLNAME }}
+          ref: ${{ env.HEADREF }}
+          # You may need fetch-depth: 0 for being able to push
+          fetch-depth: 0
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Debug
+        env:
+          HEADREPOFULLNAME: ${{ steps.pr_info.outputs.headRepoFullName }}
+          HEADREF: ${{ steps.pr_info.outputs.headRef }}
+          PRNUMBER: ${{ steps.pr_info.outputs.prNumber }}
+        run: |
+          echo "PR number: ${PRNUMBER}"
+          echo "Head Ref: ${HEADREF}"
+          echo "Head Repo Full Name: ${HEADREPOFULLNAME}"
+
+      - name: Set up Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: ${{ env.PYTHON_VERSION }}
+
+      - name: Get Ruff Version from pre-commit-config.yaml
+        id: get-ruff-version
+        run: |
+          RUFF_VERSION=$(awk '/repo: https:\/\/github.com\/astral-sh\/ruff-pre-commit/{flag=1;next}/rev:/{if(flag){print $2;exit}}' .pre-commit-config.yaml)
+          echo "ruff_version=${RUFF_VERSION}" >> $GITHUB_OUTPUT
+
+      - name: Install Ruff
+        env:
+          RUFF_VERSION: ${{ steps.get-ruff-version.outputs.ruff_version }}
+        run: python -m pip install "ruff==${RUFF_VERSION}"
+
+      - name: Ruff check
+        run: ruff check --fix
+
+      - name: Ruff format
+        run: ruff format
+
+      - name: Commit and push changes
+        id: commit_and_push
+        env:
+          HEADREPOFULLNAME: ${{ steps.pr_info.outputs.headRepoFullName }}
+          HEADREF: ${{ steps.pr_info.outputs.headRef }}
+          PRNUMBER: ${{ steps.pr_info.outputs.prNumber }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          echo "HEADREPOFULLNAME: ${HEADREPOFULLNAME}, HEADREF: ${HEADREF}"
+          # Configure git with the Actions bot user
+          git config user.name "github-actions[bot]"
+          git config user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local lfs.https://github.com/.locksverify false
+
+          # Make sure your 'origin' remote is set to the contributor's fork
+          git remote set-url origin "https://x-access-token:${GITHUB_TOKEN}@github.com/${HEADREPOFULLNAME}.git"
+
+          # If there are changes after running style/quality, commit them
+          if [ -n "$(git status --porcelain)" ]; then
+            git add .
+            git commit -m "Apply style fixes"
+            # Push to the original contributor's forked branch
+            git push origin HEAD:${HEADREF}
+            echo "changes_pushed=true" >> $GITHUB_OUTPUT
+          else
+            echo "No changes to commit."
+            echo "changes_pushed=false" >> $GITHUB_OUTPUT
+          fi
+
+      - name: Comment on PR with workflow run link
+        if: steps.commit_and_push.outputs.changes_pushed == 'true'
+        uses: actions/github-script@v6
+        with:
+          script: |
+            const prNumber = parseInt(process.env.prNumber, 10);
+            const runUrl = `${process.env.GITHUB_SERVER_URL}/${process.env.GITHUB_REPOSITORY}/actions/runs/${process.env.GITHUB_RUN_ID}`
+
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: prNumber,
+              body: `Style fixes have been applied. [View the workflow run here](${runUrl}).`
+            });
+        env:
+          prNumber: ${{ steps.pr_info.outputs.prNumber }}

.github/workflows/quality.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 name: Quality
 
 on:
@@ -33,12 +19,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout Repository
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: Set up Python
-        uses: actions/setup-python@7f4fc3e22c37d6ff65e88745f38bd3157c663f7c # v4.9.1
+        uses: actions/setup-python@v4
         with:
           python-version: ${{ env.PYTHON_VERSION }}
 
@@ -64,9 +50,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout Repository
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: typos-action
-        uses: crate-ci/typos@db35ee91e80fbb447f33b0e5fbddb24d2a1a884f # v1.29.10
+        uses: crate-ci/typos@v1.29.10

.github/workflows/test-docker-build.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # Inspired by
 # https://github.com/huggingface/peft/blob/main/.github/workflows/test-docker-build.yml
 name: Test Dockerfiles
@@ -35,13 +21,13 @@ jobs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
     steps:
       - name: Check out code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@3f54ebb830831fc121d3263c1857cfbdc310cdb9 #v42
+        uses: tj-actions/changed-files@v44
         with:
           files: docker/**
           json: "true"
@@ -64,17 +50,17 @@ jobs:
         docker-file: ${{ fromJson(needs.get_changed_files.outputs.matrix) }}
     steps:
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@b5ca514318bd6ebac0fb2aedd5d36ec1b5c232a2 # v3.10.0
+        uses: docker/setup-buildx-action@v3
         with:
           cache-binary: false
 
       - name: Check out code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: Build Docker image
-        uses: docker/build-push-action@ca052bb54ab0790a636c9b5f226502c73d547a25 # v5.4.0
+        uses: docker/build-push-action@v5
         with:
           file: ${{ matrix.docker-file }}
           context: .

.github/workflows/test.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 name: Tests
 
 on:
@@ -50,7 +36,7 @@ jobs:
     env:
       MUJOCO_GL: egl
     steps:
-      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      - uses: actions/checkout@v4
         with:
           lfs: true  # Ensure LFS files are pulled
           persist-credentials: false
@@ -62,7 +48,7 @@ jobs:
           sudo apt-get install -y libegl1-mesa-dev ffmpeg portaudio19-dev
 
       - name: Install uv and python
-        uses: astral-sh/setup-uv@d4b2f3b6ecc6e67c4457f6d3e41ec42d3d0fcb86 # v5.4.2
+        uses: astral-sh/setup-uv@v5
         with:
           enable-cache: true
           version: ${{ env.UV_VERSION }}
@@ -85,7 +71,7 @@ jobs:
     env:
       MUJOCO_GL: egl
     steps:
-      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      - uses: actions/checkout@v4
         with:
           lfs: true  # Ensure LFS files are pulled
           persist-credentials: false
@@ -94,7 +80,7 @@ jobs:
         run: sudo apt-get update && sudo apt-get install -y ffmpeg
 
       - name: Install uv and python
-        uses: astral-sh/setup-uv@d4b2f3b6ecc6e67c4457f6d3e41ec42d3d0fcb86 # v5.4.2
+        uses: astral-sh/setup-uv@v5
         with:
           enable-cache: true
           version: ${{ env.UV_VERSION }}
@@ -117,7 +103,7 @@ jobs:
     env:
       MUJOCO_GL: egl
     steps:
-      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      - uses: actions/checkout@v4
         with:
           lfs: true  # Ensure LFS files are pulled
           persist-credentials: false
@@ -126,10 +112,10 @@ jobs:
       # portaudio19-dev is needed to install pyaudio
         run: |
           sudo apt-get update && \
-          sudo apt-get install -y libegl1-mesa-dev ffmpeg portaudio19-dev
+          sudo apt-get install -y libegl1-mesa-dev portaudio19-dev
 
       - name: Install uv and python
-        uses: astral-sh/setup-uv@d4b2f3b6ecc6e67c4457f6d3e41ec42d3d0fcb86 # v5.4.2
+        uses: astral-sh/setup-uv@v5
         with:
           enable-cache: true
           version: ${{ env.UV_VERSION }}

.github/workflows/trufflehog.yml

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 on:
   push:
 
@@ -24,12 +10,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
     - name: Checkout code
-      uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      uses: actions/checkout@v4
       with:
         fetch-depth: 0
         persist-credentials: false
 
     - name: Secret Scanning
-      uses: trufflesecurity/trufflehog@90694bf9af66e7536abc5824e7a87246dbf933cb # v3.88.35
+      uses: trufflesecurity/trufflehog@main
       with:
         extra_args: --only-verified

.github/workflows/upload_pr_documentation.yml

@@ -1,16 +0,0 @@
-name: Upload PR Documentation
-
-on: # zizmor: ignore[dangerous-triggers] We follow the same pattern as in Transformers
-  workflow_run:
-    workflows: [ "Build PR Documentation" ]
-    types:
-    - completed
-
-jobs:
-  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
-    uses: huggingface/doc-builder/.github/workflows/upload_pr_documentation.yml@main
-    with:
-      package_name: lerobot
-    secrets:
-      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}
-      comment_bot_token: ${{ secrets.COMMENT_BOT_TOKEN }}

.gitignore

@@ -1,20 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Dev scripts
-.dev
-
 # Logging
 logs
 tmp
@@ -29,7 +12,6 @@ outputs
 
 # VS Code
 .vscode
-.devcontainer
 
 # HPC
 nautilus/*.yaml
@@ -82,7 +64,7 @@ pip-log.txt
 pip-delete-this-directory.txt
 
 # Unit test / coverage reports
-!tests/artifacts
+!tests/data
 htmlcov/
 .tox/
 .nox/
@@ -95,8 +77,10 @@ coverage.xml
 .hypothesis/
 .pytest_cache/
 
-# Ignore .cache
+# Ignore .cache except calibration
 .cache/*
+!.cache/calibration/
+!.cache/calibration/**
 
 # Translations
 *.mo

.pre-commit-config.yaml

@@ -1,28 +1,7 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-exclude: "tests/artifacts/.*\\.safetensors$"
+exclude: ^(tests/data)
 default_language_version:
-    python: python3.10
+    python: python3.12
 repos:
-  ##### Meta #####
-  - repo: meta
-    hooks:
-      - id: check-useless-excludes
-      - id: check-hooks-apply
-
-
   ##### Style / Misc. #####
   - repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v5.0.0
@@ -35,36 +14,31 @@ repos:
       - id: check-toml
       - id: end-of-file-fixer
       - id: trailing-whitespace
-
-  - repo: https://github.com/adhtruong/mirrors-typos
-    rev: v1.32.0
+  - repo: https://github.com/crate-ci/typos
+    rev: v1.30.0
     hooks:
       - id: typos
         args: [--force-exclude]
-
   - repo: https://github.com/asottile/pyupgrade
-    rev: v3.20.0
+    rev: v3.19.1
     hooks:
     -   id: pyupgrade
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.11.11
+    rev: v0.9.9
     hooks:
       - id: ruff
         args: [--fix]
       - id: ruff-format
 
-
   ##### Security #####
   - repo: https://github.com/gitleaks/gitleaks
-    rev: v8.26.0
+    rev: v8.24.0
     hooks:
       - id: gitleaks
-
   - repo: https://github.com/woodruffw/zizmor-pre-commit
-    rev: v1.8.0
+    rev: v1.4.1
     hooks:
       - id: zizmor
-
   - repo: https://github.com/PyCQA/bandit
     rev: 1.8.3
     hooks:

CONTRIBUTING.md

@@ -269,6 +269,9 @@ Follow these steps to start contributing:
    the PR as a draft PR. These are useful to avoid duplicated work, and to differentiate
    it from PRs ready to be merged;
 4. Make sure existing tests pass;
+<!-- 5. Add high-coverage tests. No quality testing = no merge.
+
+See an example of a good PR here: https://github.com/huggingface/lerobot/pull/ -->
 
 ### Tests
 
@@ -288,7 +291,7 @@ sudo apt-get install git-lfs
 git lfs install
 ```
 
-Pull artifacts if they're not in [tests/artifacts](tests/artifacts)
+Pull artifacts if they're not in [tests/data](tests/data)
 ```bash
 git lfs pull
 ```

Makefile

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 .PHONY: tests
 
 PYTHON_PATH := $(shell which python)
@@ -47,7 +33,6 @@ test-act-ete-train:
 		--policy.dim_model=64 \
 		--policy.n_action_steps=20 \
 		--policy.chunk_size=20 \
-		--policy.device=$(DEVICE) \
 		--env.type=aloha \
 		--env.episode_length=5 \
 		--dataset.repo_id=lerobot/aloha_sim_transfer_cube_human \
@@ -62,6 +47,7 @@ test-act-ete-train:
 		--save_checkpoint=true \
 		--log_freq=1 \
 		--wandb.enable=false \
+		--device=$(DEVICE) \
 		--output_dir=tests/outputs/act/
 
 test-act-ete-train-resume:
@@ -72,11 +58,11 @@ test-act-ete-train-resume:
 test-act-ete-eval:
 	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/act/checkpoints/000004/pretrained_model \
-		--policy.device=$(DEVICE) \
 		--env.type=aloha \
 		--env.episode_length=5 \
 		--eval.n_episodes=1 \
-		--eval.batch_size=1
+		--eval.batch_size=1 \
+		--device=$(DEVICE)
 
 test-diffusion-ete-train:
 	python lerobot/scripts/train.py \
@@ -84,7 +70,6 @@ test-diffusion-ete-train:
 		--policy.down_dims='[64,128,256]' \
 		--policy.diffusion_step_embed_dim=32 \
 		--policy.num_inference_steps=10 \
-		--policy.device=$(DEVICE) \
 		--env.type=pusht \
 		--env.episode_length=5 \
 		--dataset.repo_id=lerobot/pusht \
@@ -99,21 +84,21 @@ test-diffusion-ete-train:
 		--save_freq=2 \
 		--log_freq=1 \
 		--wandb.enable=false \
+		--device=$(DEVICE) \
 		--output_dir=tests/outputs/diffusion/
 
 test-diffusion-ete-eval:
 	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/diffusion/checkpoints/000002/pretrained_model \
-		--policy.device=$(DEVICE) \
 		--env.type=pusht \
 		--env.episode_length=5 \
 		--eval.n_episodes=1 \
-		--eval.batch_size=1
+		--eval.batch_size=1 \
+		--device=$(DEVICE)
 
 test-tdmpc-ete-train:
 	python lerobot/scripts/train.py \
 		--policy.type=tdmpc \
-		--policy.device=$(DEVICE) \
 		--env.type=xarm \
 		--env.task=XarmLift-v0 \
 		--env.episode_length=5 \
@@ -129,14 +114,15 @@ test-tdmpc-ete-train:
 		--save_freq=2 \
 		--log_freq=1 \
 		--wandb.enable=false \
+		--device=$(DEVICE) \
 		--output_dir=tests/outputs/tdmpc/
 
 test-tdmpc-ete-eval:
 	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/tdmpc/checkpoints/000002/pretrained_model \
-		--policy.device=$(DEVICE) \
 		--env.type=xarm \
 		--env.episode_length=5 \
 		--env.task=XarmLift-v0 \
 		--eval.n_episodes=1 \
-		--eval.batch_size=1
+		--eval.batch_size=1 \
+		--device=$(DEVICE)

README.md

@@ -23,38 +23,15 @@
 </div>
 
 <h2 align="center">
-    <p><a href="https://github.com/huggingface/lerobot/blob/main/examples/12_use_so101.md">
-        Build Your Own SO-101 Robot!</a></p>
+    <p><a href="https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md">New robot in town: SO-100</a></p>
 </h2>
 
 <div align="center">
-  <div style="display: flex; gap: 1rem; justify-content: center; align-items: center;" >
-    <img
-      src="media/so101/so101.webp?raw=true"
-      alt="SO-101 follower arm"
-      title="SO-101 follower arm"
-      style="width: 40%;"
-    />
-    <img
-      src="media/so101/so101-leader.webp?raw=true"
-      alt="SO-101 leader arm"
-      title="SO-101 leader arm"
-      style="width: 40%;"
-    />
-  </div>
-
-
-  <p><strong>Meet the updated SO100, the SO-101 – Just €114 per arm!</strong></p>
-  <p>Train it in minutes with a few simple moves on your laptop.</p>
-  <p>Then sit back and watch your creation act autonomously! 🤯</p>
-
-  <p><a href="https://github.com/huggingface/lerobot/blob/main/examples/12_use_so101.md">
-      See the full SO-101 tutorial here.</a></p>
-
-  <p>Want to take it to the next level? Make your SO-101 mobile by building LeKiwi!</p>
-  <p>Check out the <a href="https://github.com/huggingface/lerobot/blob/main/examples/11_use_lekiwi.md">LeKiwi tutorial</a> and bring your robot to life on wheels.</p>
-
-  <img src="media/lekiwi/kiwi.webp?raw=true" alt="LeKiwi mobile robot" title="LeKiwi mobile robot" width="50%">
+    <img src="media/so100/leader_follower.webp?raw=true" alt="SO-100 leader and follower arms" title="SO-100 leader and follower arms" width="50%">
+    <p>We just added a new tutorial on how to build a more affordable robot, at the price of $110 per arm!</p>
+    <p>Teach it new skills by showing it a few moves with just a laptop.</p>
+    <p>Then watch your homemade robot act autonomously 🤯</p>
+    <p>Follow the link to the <a href="https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md">full tutorial for SO-100</a>.</p>
 </div>
 
 <br/>
@@ -65,6 +42,7 @@
 
 ---
 
+
 🤗 LeRobot aims to provide models, datasets, and tools for real-world robotics in PyTorch. The goal is to lower the barrier to entry to robotics so that everyone can contribute and benefit from sharing datasets and pretrained models.
 
 🤗 LeRobot contains state-of-the-art approaches that have been shown to transfer to the real-world with a focus on imitation learning and reinforcement learning.
@@ -111,25 +89,14 @@ conda create -y -n lerobot python=3.10
 conda activate lerobot
 ```
 
-When using `miniconda`, install `ffmpeg` in your environment:
-```bash
-conda install ffmpeg -c conda-forge
-```
-
-> **NOTE:** This usually installs `ffmpeg 7.X` for your platform compiled with the `libsvtav1` encoder. If `libsvtav1` is not supported (check supported encoders with `ffmpeg -encoders`), you can:
->  - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
->  ```bash
->  conda install ffmpeg=7.1.1 -c conda-forge
->  ```
->  - _[On Linux only]_ Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
-
 Install 🤗 LeRobot:
 ```bash
 pip install -e .
 ```
 
-> **NOTE:** If you encounter build errors, you may need to install additional dependencies (`cmake`, `build-essential`, and `ffmpeg libs`). On Linux, run:
-`sudo apt-get install cmake build-essential python3-dev pkg-config libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev pkg-config`. For other systems, see: [Compiling PyAV](https://pyav.org/docs/develop/overview/installation.html#bring-your-own-ffmpeg)
+> **NOTE:** Depending on your platform, If you encounter any build errors during this step
+you may need to install `cmake` and `build-essential` for building some of our dependencies.
+On linux: `sudo apt-get install cmake build-essential`
 
 For simulations, 🤗 LeRobot comes with gymnasium environments that can be installed as extras:
 - [aloha](https://github.com/huggingface/gym-aloha)
@@ -221,7 +188,7 @@ dataset attributes:
   │  ├ episode_index (int64): index of the episode for this sample
   │  ├ frame_index (int64): index of the frame for this sample in the episode ; starts at 0 for each episode
   │  ├ timestamp (float32): timestamp in the episode
-  │  ├ next.done (bool): indicates the end of an episode ; True for the last frame in each episode
+  │  ├ next.done (bool): indicates the end of en episode ; True for the last frame in each episode
   │  └ index (int64): general index in the whole dataset
   ├ episode_data_index: contains 2 tensors with the start and end indices of each episode
   │  ├ from (1D int64 tensor): first frame index for each episode — shape (num episodes,) starts with 0
@@ -256,8 +223,8 @@ python lerobot/scripts/eval.py \
     --env.type=pusht \
     --eval.batch_size=10 \
     --eval.n_episodes=10 \
-    --policy.use_amp=false \
-    --policy.device=cuda
+    --use_amp=false \
+    --device=cuda
 ```
 
 Note: After training your own policy, you can re-evaluate the checkpoints with:
@@ -270,7 +237,7 @@ See `python lerobot/scripts/eval.py --help` for more instructions.
 
 ### Train your own policy
 
-Check out [example 3](./examples/3_train_policy.py) that illustrates how to train a model using our core library in python, and [example 4](./examples/4_train_policy_with_script.md) that shows how to use our training script from command line.
+Check out [example 3](./examples/3_train_policy.py) that illustrate how to train a model using our core library in python, and [example 4](./examples/4_train_policy_with_script.md) that shows how to use our training script from command line.
 
 To use wandb for logging training and evaluation curves, make sure you've run `wandb login` as a one-time setup step. Then, when running the training command above, enable WandB in the configuration by adding `--wandb.enable=true`.
 
@@ -321,7 +288,7 @@ Once you have trained a policy you may upload it to the Hugging Face hub using a
 You first need to find the checkpoint folder located inside your experiment directory (e.g. `outputs/train/2024-05-05/20-21-12_aloha_act_default/checkpoints/002500`). Within that there is a `pretrained_model` directory which should contain:
 - `config.json`: A serialized version of the policy configuration (following the policy's dataclass config).
 - `model.safetensors`: A set of `torch.nn.Module` parameters, saved in [Hugging Face Safetensors](https://huggingface.co/docs/safetensors/index) format.
-- `train_config.json`: A consolidated configuration containing all parameters used for training. The policy configuration should match `config.json` exactly. This is useful for anyone who wants to evaluate your policy or for reproducibility.
+- `train_config.json`: A consolidated configuration containing all parameter userd for training. The policy configuration should match `config.json` exactly. Thisis useful for anyone who wants to evaluate your policy or for reproducibility.
 
 To upload these to the hub, run the following:
 ```bash
@@ -360,7 +327,7 @@ with profile(
 If you want, you can cite this work with:
 ```bibtex
 @misc{cadene2024lerobot,
-    author = {Cadene, Remi and Alibert, Simon and Soare, Alexander and Gallouedec, Quentin and Zouitine, Adil and Palma, Steven and Kooijmans, Pepijn and Aractingi, Michel and Shukor, Mustafa and Aubakirova, Dana and Russi, Martino and Capuano, Francesco and Pascale, Caroline and Choghari, Jade and Moss, Jess and Wolf, Thomas},
+    author = {Cadene, Remi and Alibert, Simon and Soare, Alexander and Gallouedec, Quentin and Zouitine, Adil and Wolf, Thomas},
     title = {LeRobot: State-of-the-art Machine Learning for Real-World Robotics in Pytorch},
     howpublished = "\url{https://github.com/huggingface/lerobot}",
     year = {2024}
@@ -408,19 +375,3 @@ Additionally, if you are using any of the particular policy architecture, pretra
   year={2024}
 }
 ```
-
-
-- [HIL-SERL](https://hil-serl.github.io/)
-```bibtex
-@Article{luo2024hilserl,
-title={Precise and Dexterous Robotic Manipulation via Human-in-the-Loop Reinforcement Learning},
-author={Jianlan Luo and Charles Xu and Jeffrey Wu and Sergey Levine},
-year={2024},
-eprint={2410.21845},
-archivePrefix={arXiv},
-primaryClass={cs.RO}
-}
-```
-## Star History
-
-[![Star History Chart](https://api.star-history.com/svg?repos=huggingface/lerobot&type=Timeline)](https://star-history.com/#huggingface/lerobot&Timeline)

benchmarks/video/README.md

@@ -51,7 +51,7 @@ For a comprehensive list and documentation of these parameters, see the ffmpeg d
 ### Decoding parameters
 **Decoder**
 We tested two video decoding backends from torchvision:
-- `pyav`
+- `pyav` (default)
 - `video_reader` (requires to build torchvision from source)
 
 **Requested timestamps**

benchmarks/video/capture_camera_feed.py

@@ -17,21 +17,12 @@
 
 import argparse
 import datetime as dt
-import os
-import time
 from pathlib import Path
 
 import cv2
-import rerun as rr
-
-# see https://rerun.io/docs/howto/visualization/limit-ram
-RERUN_MEMORY_LIMIT = os.getenv("LEROBOT_RERUN_MEMORY_LIMIT", "5%")
 
 
-def display_and_save_video_stream(output_dir: Path, fps: int, width: int, height: int, duration: int):
-    rr.init("lerobot_capture_camera_feed")
-    rr.spawn(memory_limit=RERUN_MEMORY_LIMIT)
-
+def display_and_save_video_stream(output_dir: Path, fps: int, width: int, height: int):
     now = dt.datetime.now()
     capture_dir = output_dir / f"{now:%Y-%m-%d}" / f"{now:%H-%M-%S}"
     if not capture_dir.exists():
@@ -48,21 +39,24 @@ def display_and_save_video_stream(output_dir: Path, fps: int, width: int, height
     cap.set(cv2.CAP_PROP_FRAME_HEIGHT, height)
 
     frame_index = 0
-    start_time = time.time()
-    while time.time() - start_time < duration:
+    while True:
         ret, frame = cap.read()
 
         if not ret:
             print("Error: Could not read frame.")
             break
-        rr.log("video/stream", rr.Image(frame.numpy()), static=True)
+
+        cv2.imshow("Video Stream", frame)
         cv2.imwrite(str(capture_dir / f"frame_{frame_index:06d}.png"), frame)
         frame_index += 1
 
-    # Release the capture
-    cap.release()
+        # Break the loop on 'q' key press
+        if cv2.waitKey(1) & 0xFF == ord("q"):
+            break
 
-    # TODO(Steven): Add a graceful shutdown via a close() method for the Viewer context, though not currently supported in the Rerun API.
+    # Release the capture and destroy all windows
+    cap.release()
+    cv2.destroyAllWindows()
 
 
 if __name__ == "__main__":
@@ -92,11 +86,5 @@ if __name__ == "__main__":
         default=720,
         help="Height of the captured images.",
     )
-    parser.add_argument(
-        "--duration",
-        type=int,
-        default=20,
-        help="Duration in seconds for which the video stream should be captured.",
-    )
     args = parser.parse_args()
     display_and_save_video_stream(**vars(args))

benchmarks/video/run_video_benchmark.py

@@ -67,7 +67,7 @@ def parse_int_or_none(value) -> int | None:
 def check_datasets_formats(repo_ids: list) -> None:
     for repo_id in repo_ids:
         dataset = LeRobotDataset(repo_id)
-        if len(dataset.meta.video_keys) > 0:
+        if dataset.video:
             raise ValueError(
                 f"Use only image dataset for running this benchmark. Video dataset provided: {repo_id}"
             )
@@ -416,7 +416,7 @@ if __name__ == "__main__":
         "--vcodec",
         type=str,
         nargs="*",
-        default=["libx264", "hevc", "libsvtav1"],
+        default=["libx264", "libx265", "libsvtav1"],
         help="Video codecs to be tested",
     )
     parser.add_argument(
@@ -446,7 +446,7 @@ if __name__ == "__main__":
     #     nargs="*",
     #     default=[0, 1],
     #     help="Use the fastdecode tuning option. 0 disables it. "
-    #         "For libx264 and libx265/hevc, only 1 is possible. "
+    #         "For libx264 and libx265, only 1 is possible. "
     #         "For libsvtav1, 1, 2 or 3 are possible values with a higher number meaning a faster decoding optimization",
     # )
     parser.add_argument(

docker/lerobot-gpu-dev/Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
     tcpdump sysstat screen tmux \
     libglib2.0-0 libgl1-mesa-glx libegl1-mesa \
     speech-dispatcher portaudio19-dev libgeos-dev \
-    python${PYTHON_VERSION} python${PYTHON_VERSION}-venv python${PYTHON_VERSION}-dev \
+    python${PYTHON_VERSION} python${PYTHON_VERSION}-venv \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
 # Install ffmpeg build dependencies. See:

docs/README.md

@@ -1,137 +0,0 @@
-<!---
-Copyright 2020 The HuggingFace Team. All rights reserved.
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
--->
-
-# Generating the documentation
-
-To generate the documentation, you first have to build it. Several packages are necessary to build the doc,
-you can install them with the following command, at the root of the code repository:
-
-```bash
-pip install -e ".[docs]"
-```
-
-You will also need `nodejs`. Please refer to their [installation page](https://nodejs.org/en/download)
-
----
-**NOTE**
-
-You only need to generate the documentation to inspect it locally (if you're planning changes and want to
-check how they look before committing for instance). You don't have to `git commit` the built documentation.
-
----
-
-## Building the documentation
-
-Once you have setup the `doc-builder` and additional packages, you can generate the documentation by
-typing the following command:
-
-```bash
-doc-builder build lerobot docs/source/ --build_dir ~/tmp/test-build
-```
-
-You can adapt the `--build_dir` to set any temporary folder that you prefer. This command will create it and generate
-the MDX files that will be rendered as the documentation on the main website. You can inspect them in your favorite
-Markdown editor.
-
-## Previewing the documentation
-
-To preview the docs, first install the `watchdog` module with:
-
-```bash
-pip install watchdog
-```
-
-Then run the following command:
-
-```bash
-doc-builder preview lerobot docs/source/
-```
-
-The docs will be viewable at [http://localhost:3000](http://localhost:3000). You can also preview the docs once you have opened a PR. You will see a bot add a comment to a link where the documentation with your changes lives.
-
----
-**NOTE**
-
-The `preview` command only works with existing doc files. When you add a completely new file, you need to update `_toctree.yml` & restart `preview` command (`ctrl-c` to stop it & call `doc-builder preview ...` again).
-
----
-
-## Adding a new element to the navigation bar
-
-Accepted files are Markdown (.md).
-
-Create a file with its extension and put it in the source directory. You can then link it to the toc-tree by putting
-the filename without the extension in the [`_toctree.yml`](https://github.com/huggingface/lerobot/blob/main/docs/source/_toctree.yml) file.
-
-## Renaming section headers and moving sections
-
-It helps to keep the old links working when renaming the section header and/or moving sections from one document to another. This is because the old links are likely to be used in Issues, Forums, and Social media and it'd make for a much more superior user experience if users reading those months later could still easily navigate to the originally intended information.
-
-Therefore, we simply keep a little map of moved sections at the end of the document where the original section was. The key is to preserve the original anchor.
-
-So if you renamed a section from: "Section A" to "Section B", then you can add at the end of the file:
-
-```
-Sections that were moved:
-
-[ <a href="#section-b">Section A</a><a id="section-a"></a> ]
-```
-and of course, if you moved it to another file, then:
-
-```
-Sections that were moved:
-
-[ <a href="../new-file#section-b">Section A</a><a id="section-a"></a> ]
-```
-
-Use the relative style to link to the new file so that the versioned docs continue to work.
-
-For an example of a rich moved sections set please see the very end of [the transformers Trainer doc](https://github.com/huggingface/transformers/blob/main/docs/source/en/main_classes/trainer.md).
-
-### Adding a new tutorial
-
-Adding a new tutorial or section is done in two steps:
-
-- Add a new file under `./source`. This file can either be ReStructuredText (.rst) or Markdown (.md).
-- Link that file in `./source/_toctree.yml` on the correct toc-tree.
-
-Make sure to put your new file under the proper section. If you have a doubt, feel free to ask in a Github Issue or PR.
-
-### Writing source documentation
-
-Values that should be put in `code` should either be surrounded by backticks: \`like so\`. Note that argument names
-and objects like True, None or any strings should usually be put in `code`.
-
-#### Writing a multi-line code block
-
-Multi-line code blocks can be useful for displaying examples. They are done between two lines of three backticks as usual in Markdown:
-
-
-````
-```
-# first line of code
-# second line
-# etc
-```
-````
-
-#### Adding an image
-
-Due to the rapidly growing repository, it is important to make sure that no files that would significantly weigh down the repository are added. This includes images, videos, and other non-text files. We prefer to leverage a hf.co hosted `dataset` like
-the ones hosted on [`hf-internal-testing`](https://huggingface.co/hf-internal-testing) in which to place these files and reference
-them by URL. We recommend putting them in the following dataset: [huggingface/documentation-images](https://huggingface.co/datasets/huggingface/documentation-images).
-If an external contribution, feel free to add the images to your PR and ask a Hugging Face member to migrate your images
-to this dataset.

docs/source/_toctree.yml

@@ -1,28 +0,0 @@
-- sections:
-  - local: index
-    title: LeRobot
-  - local: installation
-    title: Installation
-  title: Get started
-- sections:
-  - local: getting_started_real_world_robot
-    title: Getting Started with Real-World Robots
-  - local: cameras
-    title: Cameras
-  - local: hilserl
-    title: Getting Started with Reinforcement Learning
-  title: "Tutorials"
-- sections:
-  - local: so101
-    title: SO-101
-  - local: so100
-    title: SO-100
-  - local: koch
-    title: Koch v1.1
-  - local: lekiwi
-    title: LeKiwi
-  title: "Robots"
-- sections:
-  - local: contributing
-    title: Contribute to LeRobot
-  title: "Contribute"

docs/source/cameras.mdx

@@ -1,173 +0,0 @@
-# Cameras
-
-LeRobot offers multiple options for video capture, including phone cameras, built-in laptop cameras, external webcams, and Intel RealSense cameras. To efficiently record frames from most cameras, you can use either the `OpenCVCamera` or `RealSenseCamera` class. For additional compatibility details on the `OpenCVCamera` class, refer to the [Video I/O with OpenCV Overview](https://docs.opencv.org/4.x/d0/da7/videoio_overview.html).
-
-### Finding your camera
-
-To instantiate a camera, you need a camera identifier. This identifier might change if you reboot your computer or re-plug your camera, a behavior mostly dependant on your operating system.
-
-To find the camera indices of the cameras plugged into your system, run the following script:
-```bash
-python lerobot/find_cameras.py opencv # or realsense for Intel Realsense cameras
-```
-
-The output will look something like this if you have two cameras connected:
-```
---- Detected Cameras ---
-Camera #0:
-  Name: OpenCV Camera @ 0
-  Type: OpenCV
-  Id: 0
-  Backend api: AVFOUNDATION
-  Default stream profile:
-    Format: 16.0
-    Width: 1920
-    Height: 1080
-    Fps: 15.0
---------------------
-(more cameras ...)
-```
-
-> [!WARNING]
-> When using Intel RealSense cameras in `macOS`, you could get this [error](https://github.com/IntelRealSense/librealsense/issues/12307): `Error finding RealSense cameras: failed to set power state`, this can be solved by running the same command with `sudo` permissions. Note that using RealSense cameras in `macOS` is unstable.
-
-
-## Use Cameras
-
-Below are two examples, demonstrating how to work with the API.
-
-- **Asynchronous frame capture** using an OpenCV-based camera
-- **Color and depth capture** using an Intel RealSense camera
-
-
-<hfoptions id="shell_restart">
-<hfoption id="Open CV Camera">
-
-```python
-from lerobot.common.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.common.cameras.opencv.camera_opencv import OpenCVCamera
-from lerobot.common.cameras.configs import ColorMode, Cv2Rotation
-
-# Construct an `OpenCVCameraConfig` with your desired FPS, resolution, color mode, and rotation.
-config = OpenCVCameraConfig(
-    index_or_path=0,
-    fps=15,
-    width=1920,
-    height=1080,
-    color_mode=ColorMode.RGB,
-    rotation=Cv2Rotation.NO_ROTATION
-)
-
-# Instantiate and connect an `OpenCVCamera`, performing a warm-up read (default).
-camera = OpenCVCamera(config)
-camera.connect()
-
-# Read frames asynchronously in a loop via `async_read(timeout_ms)`
-try:
-    for i in range(10):
-        frame = camera.async_read(timeout_ms=200)
-        print(f"Async frame {i} shape:", frame.shape)
-finally:
-    camera.disconnect()
-```
-
-</hfoption>
-<hfoption id="Intel Realsense Camera">
-
-```python
-from lerobot.common.cameras.intel.configuration_realsense import RealSenseCameraConfig
-from lerobot.common.cameras.intel.camera_realsense import RealSenseCamera
-from lerobot.common.cameras.configs import ColorMode, Cv2Rotation
-
-# Create a `RealSenseCameraConfig` specifying your camera’s serial number and enabling depth.
-config = RealSenseCameraConfig(
-    serial_number="233522074606",
-    fps=15,
-    width=640,
-    height=480,
-    color_mode=ColorMode.RGB,
-    use_depth=True,
-    rotation=Cv2Rotation.NO_ROTATION
-)
-
-# Instantiate and connect a `RealSenseCamera` with warm-up read (default).
-camera = RealSenseCamera(config)
-camera.connect()
-
-# Capture a color frame via `read()` and a depth map via `read_depth()`.
-try:
-    color_frame = camera.read()
-    depth_map = camera.read_depth()
-    print("Color frame shape:", color_frame.shape)
-    print("Depth map shape:", depth_map.shape)
-finally:
-    camera.disconnect()
-```
-</hfoption>
-</hfoptions>
-
-
-## Use your phone
-<hfoptions id="use phone">
-<hfoption id="Mac">
-
-To use your iPhone as a camera on macOS, enable the Continuity Camera feature:
-- Ensure your Mac is running macOS 13 or later, and your iPhone is on iOS 16 or later.
-- Sign in both devices with the same Apple ID.
-- Connect your devices with a USB cable or turn on Wi-Fi and Bluetooth for a wireless connection.
-
-For more details, visit [Apple support](https://support.apple.com/en-gb/guide/mac-help/mchl77879b8a/mac).
-
-Your iPhone should be detected automatically when running the camera setup script in the next section.
-
-</hfoption>
-<hfoption id="Linux">
-
-If you want to use your phone as a camera on Linux, follow these steps to set up a virtual camera
-
-1. *Install `v4l2loopback-dkms` and `v4l-utils`*. Those packages are required to create virtual camera devices (`v4l2loopback`) and verify their settings with the `v4l2-ctl` utility from `v4l-utils`. Install them using:
-```python
-sudo apt install v4l2loopback-dkms v4l-utils
-```
-2. *Install [DroidCam](https://droidcam.app) on your phone*. This app is available for both iOS and Android.
-3. *Install [OBS Studio](https://obsproject.com)*. This software will help you manage the camera feed. Install it using [Flatpak](https://flatpak.org):
-```python
-flatpak install flathub com.obsproject.Studio
-```
-4. *Install the DroidCam OBS plugin*. This plugin integrates DroidCam with OBS Studio. Install it with:
-```python
-flatpak install flathub com.obsproject.Studio.Plugin.DroidCam
-```
-5. *Start OBS Studio*. Launch with:
-```python
-flatpak run com.obsproject.Studio
-```
-6. *Add your phone as a source*. Follow the instructions [here](https://droidcam.app/obs/usage). Be sure to set the resolution to `640x480`.
-7. *Adjust resolution settings*. In OBS Studio, go to `File > Settings > Video`. Change the `Base(Canvas) Resolution` and the `Output(Scaled) Resolution` to `640x480` by manually typing it in.
-8. *Start virtual camera*. In OBS Studio, follow the instructions [here](https://obsproject.com/kb/virtual-camera-guide).
-9. *Verify the virtual camera setup*. Use `v4l2-ctl` to list the devices:
-```python
-v4l2-ctl --list-devices
-```
-You should see an entry like:
-```
-VirtualCam (platform:v4l2loopback-000):
-/dev/video1
-```
-10. *Check the camera resolution*. Use `v4l2-ctl` to ensure that the virtual camera output resolution is `640x480`. Change `/dev/video1` to the port of your virtual camera from the output of `v4l2-ctl --list-devices`.
-```python
-v4l2-ctl -d /dev/video1 --get-fmt-video
-```
-You should see an entry like:
-```
->>> Format Video Capture:
->>>	Width/Height      : 640/480
->>>	Pixel Format      : 'YUYV' (YUYV 4:2:2)
-```
-
-Troubleshooting: If the resolution is not correct you will have to delete the Virtual Camera port and try again as it cannot be changed.
-
-If everything is set up correctly, you can proceed with the rest of the tutorial.
-
-</hfoption>
-</hfoptions>

docs/source/contributing.md

@@ -1 +0,0 @@
-../../CONTRIBUTING.md

docs/source/getting_started_real_world_robot.mdx

@@ -1,321 +0,0 @@
-# Getting Started with Real-World Robots
-
-This tutorial will explain how to train a neural network to control a real robot autonomously.
-
-**You'll learn:**
-1. How to record and visualize your dataset.
-2. How to train a policy using your data and prepare it for evaluation.
-3. How to evaluate your policy and visualize the results.
-
-By following these steps, you'll be able to replicate tasks, such as picking up a Lego block and placing it in a bin with a high success rate, as shown in the video below.
-
-<details>
-<summary><strong>Video: pickup lego block task</strong></summary>
-
-<div class="video-container">
-  <video controls width="600">
-    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot_task.mp4" type="video/mp4" />
-  </video>
-</div>
-
-</details>
-
-This tutorial isn’t tied to a specific robot: we walk you through the commands and API snippets you can adapt for any supported platform.
-
-During data collection, you’ll use a “teloperation” device, such as a leader arm or keyboard to teleoperate the robot and record its motion trajectories.
-
-Once you’ve gathered enough trajectories, you’ll train a neural network to imitate these trajectories and deploy the trained model so your robot can perform the task autonomously.
-
-If you run into any issues at any point, jump into our [Discord community](https://discord.com/invite/s3KuuzsPFb) for support.
-
-## Set up and Calibrate
-
-If you haven't yet set up and calibrated your robot and teleop device, please do so by following the robot-specific tutorial.
-
-## Teleoperate
-
-In this example, we’ll demonstrate how to teleoperate the SO101 robot. For each command, we also provide a corresponding API example.
-
-<hfoptions id="teleoperate_so101">
-<hfoption id="Command">
-```bash
-python -m lerobot.teleoperate \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=my_red_robot_arm \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_blue_leader_arm
-```
-</hfoption>
-<hfoption id="API example">
-```python
-from lerobot.common.teleoperators.so101_leader import SO101LeaderConfig, SO101Leader
-from lerobot.common.robots.so101_follower import SO101FollowerConfig, SO101Follower
-
-robot_config = SO101FollowerConfig(
-    port="/dev/tty.usbmodem58760431541",
-    id="my_red_robot_arm",
-)
-
-teleop_config = SO101LeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_blue_leader_arm",
-)
-
-robot = SO101Follower(robot_config)
-teleop_device = SO101Leader(teleop_config)
-robot.connect()
-teleop_device.connect()
-
-while True:
-    action = teleop_device.get_action()
-    robot.send_action(action)
-```
-</hfoption>
-</hfoptions>
-
-The teleoperate command will automatically:
-1. Identify any missing calibrations and initiate the calibration procedure.
-2. Connect the robot and teleop device and start teleoperation.
-
-## Cameras
-
-To add cameras to your setup, follow this [Guide](./cameras#setup-cameras).
-
-## Teleoperate with cameras
-
-With `rerun`, you can teleoperate again while simultaneously visualizing the camera feeds and joint positions. In this example, we’re using the Koch arm.
-
-<hfoptions id="teleoperate_koch_camera">
-<hfoption id="Command">
-```bash
-python -m lerobot.teleoperate \
-    --robot.type=koch_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=my_koch_robot \
-    --robot.cameras="{ front: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \
-    --teleop.type=koch_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_koch_teleop \
-    --display_data=true
-```
-</hfoption>
-<hfoption id="API example">
-```python
-from lerobot.common.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.common.teleoperators.koch_leader import KochLeaderConfig, KochLeader
-from lerobot.common.robots.koch_follower import KochFollowerConfig, KochFollower
-
-camera_config = {
-    "front": OpenCVCameraConfig(index_or_path=0, width=1920, height=1080, fps=30)
-}
-
-robot_config = KochFollowerConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_red_robot_arm",
-    cameras=camera_config
-)
-
-teleop_config = KochLeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_blue_leader_arm",
-)
-
-robot = KochFollower(robot_config)
-teleop_device = KochLeader(teleop_config)
-robot.connect()
-teleop_device.connect()
-
-while True:
-    observation = robot.get_observation()
-    action = teleop_device.get_action()
-    robot.send_action(action)
-```
-</hfoption>
-</hfoptions>
-
-## Record a dataset
-
-Once you're familiar with teleoperation, you can record your first dataset.
-
-We use the Hugging Face hub features for uploading your dataset. If you haven't previously used the Hub, make sure you can login via the cli using a write-access token, this token can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens).
-
-Add your token to the CLI by running this command:
-```bash
-huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
-```
-
-Then store your Hugging Face repository name in a variable:
-```bash
-HF_USER=$(huggingface-cli whoami | head -n 1)
-echo $HF_USER
-```
-
-Now you can record a dataset. To record 2 episodes and upload your dataset to the hub, execute this command tailored to the SO101.
-```bash
-python -m lerobot.record \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem585A0076841 \
-    --robot.id=my_red_robot_arm \
-    --robot.cameras="{ front: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_blue_leader_arm \
-    --display_data=true \
-    --dataset.repo_id=aliberts/record-test \
-    --dataset.num_episodes=2 \
-    --dataset.single_task="Grab the black cube"
-```
-
-#### Dataset upload
-Locally, your dataset is stored in this folder: `~/.cache/huggingface/lerobot/{repo-id}`. At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. https://huggingface.co/datasets/cadene/so101_test) that you can obtain by running:
-```bash
-echo https://huggingface.co/datasets/${HF_USER}/so101_test
-```
-Your dataset will be automatically tagged with `LeRobot` for the community to find it easily, and you can also add custom tags (in this case `tutorial` for example).
-
-You can look for other LeRobot datasets on the hub by searching for `LeRobot` [tags](https://huggingface.co/datasets?other=LeRobot).
-
-#### Record function
-
-The `record` function provides a suite of tools for capturing and managing data during robot operation:
-
-##### 1. Data Storage
-- Data is stored using the `LeRobotDataset` format and is stored on disk during recording.
-- By default, the dataset is pushed to your Hugging Face page after recording.
-  - To disable uploading, use `--dataset.push_to_hub=False`.
-
-##### 2. Checkpointing and Resuming
-- Checkpoints are automatically created during recording.
-- If an issue occurs, you can resume by re-running the same command with `--control.resume=true`.
-- To start recording from scratch, **manually delete** the dataset directory.
-
-##### 3. Recording Parameters
-Set the flow of data recording using command-line arguments:
-- `--dataset.episode_time_s=60`
-  Duration of each data recording episode (default: **60 seconds**).
-- `--dataset.reset_time_s=60`
-  Duration for resetting the environment after each episode (default: **60 seconds**).
-- `--dataset.num_episodes=50`
-  Total number of episodes to record (default: **50**).
-
-##### 4. Keyboard Controls During Recording
-Control the data recording flow using keyboard shortcuts:
-- Press **Right Arrow (`→`)**: Early stop the current episode or reset time and move to the next.
-- Press **Left Arrow (`←`)**: Cancel the current episode and re-record it.
-- Press **Escape (`ESC`)**: Immediately stop the session, encode videos, and upload the dataset.
-
-#### Tips for gathering data
-
-Once you're comfortable with data recording, you can create a larger dataset for training. A good starting task is grasping an object at different locations and placing it in a bin. We suggest recording at least 50 episodes, with 10 episodes per location. Keep the cameras fixed and maintain consistent grasping behavior throughout the recordings. Also make sure the object you are manipulating is visible on the camera's. A good rule of thumb is you should be able to do the task yourself by only looking at the camera images.
-
-In the following sections, you’ll train your neural network. After achieving reliable grasping performance, you can start introducing more variations during data collection, such as additional grasp locations, different grasping techniques, and altering camera positions.
-
-Avoid adding too much variation too quickly, as it may hinder your results.
-
-If you want to dive deeper into this important topic, you can check out the [blog post](https://huggingface.co/blog/lerobot-datasets#what-makes-a-good-dataset) we wrote on what makes a good dataset.
-
-
-#### Troubleshooting:
-- On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
-
-## Visualize a dataset
-
-If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
-```bash
-echo ${HF_USER}/so101_test
-```
-
-If you didn't upload with `--control.push_to_hub=false`, you can visualize it locally with (via a window in the browser `http://127.0.0.1:9090` with the visualization tool):
-```bash
-python lerobot/scripts/visualize_dataset_html.py \
-  --repo-id ${HF_USER}/so101_test \
-  --local-files-only 1
-```
-
-This will launch a local web server that looks like this:
-<div style="text-align:center;">
-  <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/visualize_dataset_html.webp?raw=true" alt="Koch v1.1 leader and follower arms" title="Koch v1.1 leader and follower arms" width="100%"></img>
-</div>
-
-## Replay an episode
-
-A useful feature is the `replay` function, which allows you to replay any episode that you've recorded or episodes from any dataset out there. This function helps you test the repeatability of your robot's actions and assess transferability across robots of the same model.
-
-You can replay the first episode on your robot with:
-```bash
-python -m lerobot.replay \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=black \
-    --dataset.repo_id=aliberts/record-test \
-    --dataset.episode=2
-```
-
-Your robot should replicate movements similar to those you recorded. For example, check out [this video](https://x.com/RemiCadene/status/1793654950905680090) where we use `replay` on a Aloha robot from [Trossen Robotics](https://www.trossenrobotics.com).
-
-## Train a policy
-
-To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
-```bash
-python lerobot/scripts/train.py \
-  --dataset.repo_id=${HF_USER}/so101_test \
-  --policy.type=act \
-  --output_dir=outputs/train/act_so101_test \
-  --job_name=act_so101_test \
-  --policy.device=cuda \
-  --wandb.enable=true
-```
-
-Let's explain the command:
-1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/so101_test`.
-2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor states, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
-4. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
-5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
-
-Training should take several hours. You will find checkpoints in `outputs/train/act_so101_test/checkpoints`.
-
-To resume training from a checkpoint, below is an example command to resume from `last` checkpoint of the `act_so101_test` policy:
-```bash
-python lerobot/scripts/train.py \
-  --config_path=outputs/train/act_so101_test/checkpoints/last/pretrained_model/train_config.json \
-  --resume=true
-```
-
-#### Upload policy checkpoints
-
-Once training is done, upload the latest checkpoint with:
-```bash
-huggingface-cli upload ${HF_USER}/act_so101_test \
-  outputs/train/act_so101_test/checkpoints/last/pretrained_model
-```
-
-You can also upload intermediate checkpoints with:
-```bash
-CKPT=010000
-huggingface-cli upload ${HF_USER}/act_so101_test${CKPT} \
-  outputs/train/act_so101_test/checkpoints/${CKPT}/pretrained_model
-```
-
-## Evaluate your policy
-
-You can use the `record` script from [`lerobot/record.py`](https://github.com/huggingface/lerobot/blob/main/lerobot/record.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
-```bash
-python -m lerobot.record  \
-  --robot.type=so100_follower \
-  --robot.port=/dev/ttyACM1 \
-  --robot.cameras="{ up: {type: opencv, index_or_path: /dev/video10, width: 640, height: 480, fps: 30}, side: {type: intelrealsense, serial_number_or_name: 233522074606, width: 640, height: 480, fps: 30}}" \
-  --robot.id=blue_follower_arm \
-  --teleop.type=so100_leader \
-  --teleop.port=/dev/ttyACM0 \
-  --teleop.id=red_leader_arm \
-  --display_data=false \
-  --dataset.repo_id=$HF_USER/eval_lego_${EPOCHREALTIME/[^0-9]/} \
-  --dataset.single_task="Put lego brick into the transparent box" \
-  --policy.path=${HF_USER}/act_johns_arm
-```
-
-As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
-1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_act_so101_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_so101_test`).
-2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_so101_test`).

docs/source/hilserl.mdx

@@ -1,512 +0,0 @@
-# HilSerl Real Robot Training Workflow Guide
-
-Human-in-the-Loop Sample-Efficient Reinforcement Learning (HIL-SERL) with LeRobot workflow for taking a policy from “zero” to real-world robot mastery in just a couple of hours.
-It combines three ingredients:
-	1.	**Offline demonstrations & reward classifier:** a handful of human-teleop episodes plus a vision-based success detector give the policy a shaped starting point.
-	2.	**On-robot actor / learner loop with human interventions:** a distributed SAC/RLPD learner updates the policy while an actor explores on the physical robot; the human can jump in at any time to correct dangerous or unproductive behaviour.
-	3.	**Safety & efficiency tools:** joint/EE bounds, impedance control, crop-ROI preprocessing and WandB monitoring keep the data useful and the hardware safe.
-
-Together these elements let HIL-SERL reach near-perfect task success and faster cycle times than imitation-only baselines.
-
-<p align="center">
-  <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/hilserl-main-figure.png" alt="HIL-SERL workflow" title="HIL-SERL workflow" width="100%"></img>
-</p>
-
-<p align="center"><i>HIL-SERL workflow, Luo et al. 2024</i></p>
-
-This guide provides step-by-step instructions for training a robot policy using LeRobot's HilSerl implementation to train on a real robot.
-
-
-# 1. Real Robot Training Workflow
-
-## 1.1 Understanding Configuration
-
-The training process begins with proper configuration for the HILSerl environment. The configuration class of interest is `HILSerlRobotEnvConfig` in `lerobot/common/envs/configs.py`. Which is defined as:
-
-```python
-class HILSerlRobotEnvConfig(EnvConfig):
-    robot: Optional[RobotConfig] = None    # Main robot agent (defined in `lerobot/common/robots`)
-    teleop: Optional[TeleoperatorConfig] = None    # Teleoperator agent, e.g., gamepad or leader arm, (defined in `lerobot/common/teleoperators`)
-    wrapper: Optional[EnvTransformConfig] = None    # Environment wrapper settings; check `lerobot/scripts/server/gym_manipulator.py`
-    fps: int = 10    # Control frequency
-    name: str = "real_robot"    # Environment name
-    mode: str = None    # "record", "replay", or None (for training)
-    repo_id: Optional[str] = None    # LeRobot dataset repository ID
-    dataset_root: Optional[str] = None    # Local dataset root (optional)
-    task: str = ""    # Task identifier
-    num_episodes: int = 10    # Number of episodes for recording
-    episode: int = 0    # episode index for replay
-    device: str = "cuda"    # Compute device
-    push_to_hub: bool = True    # Whether to push the recorded datasets to Hub
-    pretrained_policy_name_or_path: Optional[str] = None    # For policy loading
-    reward_classifier_pretrained_path: Optional[str] = None    # For reward model
-```
-
-
-## 1.2 Finding Robot Workspace Bounds
-
-Before collecting demonstrations, you need to determine the appropriate operational bounds for your robot.
-
-This helps simplifying the problem of learning on the real robot by limiting the robot's operational space to a specific region that solves the task and avoids unnecessary or unsafe exploration.
-
-### 1.2.1 Using find_joint_limits.py
-
-This script helps you find the safe operational bounds for your robot's end-effector. Given that you have a follower and leader arm, you can use the script to find the bounds for the follower arm that will be applied during training.
-Bounding the action space will reduce the redundant exploration of the agent and guarantees safety.
-
-```bash
-python -m lerobot.scripts.find_joint_limits \
-    --robot.type=so100_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=black \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=blue
-```
-
-### 1.2.2 Workflow
-
-1. Run the script and move the robot through the space that solves the task
-2. The script will record the minimum and maximum end-effector positions and the joint angles and prints them to the console, for example:
-   ```
-   Max ee position [0.24170487 0.201285   0.10273342]
-   Min ee position [0.16631757 -0.08237468  0.03364977]
-   Max joint positions [-20.0, -20.0, -20.0, -20.0, -20.0, -20.0]
-   Min joint positions [50.0, 50.0, 50.0, 50.0, 50.0, 50.0]
-   ```
-3. Use these values in the configuration of you teleoperation device (TeleoperatorConfig) under the `end_effector_bounds` field
-
-### 1.2.3 Example Configuration
-
-```json
-"end_effector_bounds": {
-    "max": [0.24, 0.20, 0.10],
-    "min": [0.16, -0.08, 0.03]
-}
-```
-
-## 1.3 Collecting Demonstrations
-
-With the bounds defined, you can safely collect demonstrations for training. Training RL with off-policy algorithm allows us to use offline datasets collected in order to improve the efficiency of the learning process.
-
-### 1.3.1 Setting Up Record Mode
-
-Create a configuration file for recording demonstrations (or edit an existing one like `env_config_so100.json`):
-
-1. Set `mode` to `"record"`
-2. Specify a unique `repo_id` for your dataset (e.g., "username/task_name")
-3. Set `num_episodes` to the number of demonstrations you want to collect
-4. Set `crop_params_dict` to `null` initially (we'll determine crops later)
-5. Configure `robot`, `cameras`, and other hardware settings
-
-Example configuration section:
-```json
-"mode": "record",
-"repo_id": "username/pick_lift_cube",
-"dataset_root": null,
-"task": "pick_and_lift",
-"num_episodes": 15,
-"episode": 0,
-"push_to_hub": true
-```
-
-### 1.3.2 Gamepad Controls
-
-<p align="center">
-  <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/gamepad_guide.jpg?raw=true" alt="Figure shows the control mappings on a Logitech gamepad." title="Gamepad Control Mapping" width="100%"></img>
-</p>
-<p align="center"><i>Gamepad button mapping for robot control and episode management</i></p>
-
-
-### 1.3.3 Recording Demonstrations
-
-Start the recording process:
-
-```bash
-python lerobot/scripts/rl/gym_manipulator.py --config_path lerobot/configs/env_config_so100.json
-```
-
-During recording:
-1. The robot will reset to the initial position defined in the configuration file `fixed_reset_position`
-2. Use the gamepad to control the robot by setting `"control_mode"="gamepad"` in the configuration file
-3. Complete the task successfully
-4. The episode ends with a reward of 1 when you press the "success" button
-5. If the time limit is reached, or the fail button is pressed, the episode ends with a reward of 0
-6. You can rerecord an episode by pressing the "rerecord" button
-7. The process automatically continues to the next episode
-8. After recording all episodes, the dataset is pushed to the Hugging Face Hub (optional) and saved locally
-
-
-
-## 1.4 Processing the Dataset
-
-After collecting demonstrations, process them to determine optimal camera crops.
-Reinforcement learning is sensitive to background distractions, so it is important to crop the images to the relevant workspace area.
-Note: If you already know the crop parameters, you can skip this step and just set the `crop_params_dict` in the configuration file during recording.
-
-### 1.4.1 Determining Crop Parameters
-
-Use the `crop_dataset_roi.py` script to interactively select regions of interest in your camera images:
-
-```bash
-python lerobot/scripts/rl/crop_dataset_roi.py --repo-id username/pick_lift_cube
-```
-
-1. For each camera view, the script will display the first frame
-2. Draw a rectangle around the relevant workspace area
-3. Press 'c' to confirm the selection
-4. Repeat for all camera views
-5. The script outputs cropping parameters and creates a new cropped dataset
-
-Example output:
-```
-Selected Rectangular Regions of Interest (top, left, height, width):
-observation.images.side: [180, 207, 180, 200]
-observation.images.front: [180, 250, 120, 150]
-```
-
-<p align="center">
-<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/crop_dataset.gif" width="600"/>
-</p>
-
-<p align="center"><i>Interactive cropping tool for selecting regions of interest</i></p>
-
-
-### 1.4.2 Updating Configuration
-
-Add these crop parameters to your training configuration:
-
-```json
-"crop_params_dict": {
-    "observation.images.side": [180, 207, 180, 200],
-    "observation.images.front": [180, 250, 120, 150]
-},
-"resize_size": [128, 128]
-```
-
-## 1.5 Training with Actor-Learner
-
-The LeRobot system uses a distributed actor-learner architecture for training. You will need to start two processes: a learner and an actor.
-
-### 1.5.1 Configuration Setup
-
-Create a training configuration file (See example `train_config_hilserl_so100.json`). The training config is based on the main `TrainPipelineConfig` class in `lerobot/configs/train.py`.
-
-1. Set `mode` to `null` (for training mode)
-2. Configure the policy settings (`type`, `device`, etc.)
-3. Set `dataset` to your cropped dataset
-4. Configure environment settings with crop parameters
-5. Check the other parameters related to SAC.
-6. Verify that the `policy` config is correct with the right `input_features` and `output_features` for your task.
-
-### 1.5.2 Starting the Learner
-
-First, start the learner server process:
-
-```bash
-python lerobot/scripts/rl/learner.py --config_path lerobot/configs/train_config_hilserl_so100.json
-```
-
-The learner:
-- Initializes the policy network
-- Prepares replay buffers
-- Opens a gRPC server to communicate with actors
-- Processes transitions and updates the policy
-
-### 1.5.3 Starting the Actor
-
-In a separate terminal, start the actor process with the same configuration:
-
-```bash
-python lerobot/scripts/rl/actor.py --config_path lerobot/configs/train_config_hilserl_so100.json
-```
-
-The actor:
-- Connects to the learner via gRPC
-- Initializes the environment
-- Execute rollouts of the policy to collect experience
-- Sends transitions to the learner
-- Receives updated policy parameters
-
-### 1.5.4 Training Flow
-
-The training proceeds automatically:
-
-1. The actor executes the policy in the environment
-2. Transitions are collected and sent to the learner
-3. The learner updates the policy based on these transitions
-4. Updated policy parameters are sent back to the actor
-5. The process continues until the specified step limit is reached
-
-### 1.5.5 Human in the Loop
-
-- The key to learning efficiently is to have a human interventions to provide corrective feedback and completing the task to aide the policy learning and exploration.
-- To perform human interventions, you can press the upper right trigger button on the gamepad. This will pause the policy actions and allow you to take over.
-- A successful experiment is one where the human has to intervene at the start but then reduces the amount of interventions as the policy improves. You can monitor the intervention rate in the `wandb` dashboard.
-
-<p align="center">
-  <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/hil_effect.png?raw=true" alt="Figure shows the control mappings on a Logitech gamepad." title="Gamepad Control Mapping" width="100%"></img>
-</p>
-
-<p align="center"><i>Example showing how human interventions help guide policy learning over time</i></p>
-
-- The figure shows the plot of the episodic reward over interaction step. The figure shows the effect of human interventions on the policy learning.
-- The orange curve is an experiment without any human interventions. While the pink and blue curves are experiments with human interventions.
-- We can observe that the number of steps where the policy starts achieving the maximum reward is cut by a quarter when human interventions are present.
-
-#### Guide to Human Interventions
-The strategy to follow is to intervene heavily at the start of training and then reduce the amount of interventions as the training progresses. Some tips and hints:
-- Interevene for almost the length of the entire episode at the first few episodes.
-- When the policy is less chaotic, gradually reduce the intervention time during one episode and let the policy explore for a longer time.
-- Once the policy start guiding the robot towards achieving the task, even if its not perfect, you can limit your interventions to simple quick actions like a grasping command, or grasp and lift command.
-
-## 1.6 Monitoring and Debugging
-
-If you have `wandb.enable` set to `true` in your configuration, you can monitor training progress in real-time through the [Weights & Biases](https://wandb.ai/site/) dashboard.
-
-# 2. Training a Reward Classifier with LeRobot
-
-This guide explains how to train a reward classifier for human-in-the-loop reinforcement learning implementation of  LeRobot. Reward classifiers learn to predict the reward value given a state which can be used in an RL setup to train a policy.
-
-
-The reward classifier implementation in `modeling_classifier.py` uses a pretrained vision model to process the images. It can output either a single value for binary rewards to predict success/fail cases or multiple values for multi-class settings.
-
-## 2.1 Collecting a Dataset
-Before training, you need to collect a dataset with labeled examples. The `record_dataset` function in `gym_manipulator.py` enables the process of collecting a dataset of observations, actions, and rewards.
-
-To collect a dataset, you need to modeify some parameters in the environment configuration based on HILSerlRobotEnvConfig.
-
-```bash
-python lerobot/scripts/rl/gym_manipulator.py --config_path lerobot/configs/reward_classifier_train_config.json
-```
-
-### 2.1.1 Key Parameters for Data Collection:
-
-- **mode**: set it to "record" to collect a dataset
-- **repo_id**: "hf_username/dataset_name", name of the dataset and repo on the hub
-- **num_episodes**: Number of episodes to record
-- **number_of_steps_after_success**: Number of additional frames to record after a success (reward=1) is detected
-- **fps**: Number of frames per second to record
-- **push_to_hub**: Whether to push the dataset to the hub
-
-The `number_of_steps_after_success` parameter is crucial as it allows you to collect more positive examples. When a success is detected, the system will continue recording for the specified number of steps while maintaining the reward=1 label. Otherwise, there won't be enough states in the dataset labeled to 1 to train a good classifier.
-
-Example configuration section for data collection:
-
-```json
-{
-    "mode": "record",
-    "repo_id": "hf_username/dataset_name",
-    "dataset_root": "data/your_dataset",
-    "num_episodes": 20,
-    "push_to_hub": true,
-    "fps": 10,
-    "number_of_steps_after_success": 15
-}
-```
-
-## 2.2 Reward Classifier Configuration
-
-The reward classifier is configured using `configuration_classifier.py`. Here are the key parameters:
-
-- **model_name**: Base model architecture (e.g., we mainly use "helper2424/resnet10")
-- **model_type**: "cnn" or "transformer"
-- **num_cameras**: Number of camera inputs
-- **num_classes**: Number of output classes (typically 2 for binary success/failure)
-- **hidden_dim**: Size of hidden representation
-- **dropout_rate**: Regularization parameter
-- **learning_rate**: Learning rate for optimizer
-
-Example configuration from `reward_classifier_train_config.json`:
-
-```json
-{
-  "policy": {
-    "type": "reward_classifier",
-    "model_name": "helper2424/resnet10",
-    "model_type": "cnn",
-    "num_cameras": 2,
-    "num_classes": 2,
-    "hidden_dim": 256,
-    "dropout_rate": 0.1,
-    "learning_rate": 1e-4,
-    "device": "cuda",
-    "use_amp": true,
-    "input_features": {
-      "observation.images.front": {
-        "type": "VISUAL",
-        "shape": [3, 128, 128]
-      },
-      "observation.images.side": {
-        "type": "VISUAL",
-        "shape": [3, 128, 128]
-      }
-    }
-  }
-}
-```
-
-## 2.3 Training the Classifier
-
-To train the classifier, use the `train.py` script with your configuration:
-
-```bash
-python lerobot/scripts/train.py --config_path lerobot/configs/reward_classifier_train_config.json
-```
-
-## 2.4 Deploying and Testing the Model
-
-To use your trained reward classifier, configure the `HILSerlRobotEnvConfig` to use your model:
-
-```python
-env_config = HILSerlRobotEnvConfig(
-    reward_classifier_pretrained_path="path_to_your_pretrained_trained_model",
-    # Other environment parameters
-)
-```
-or set the argument in the json config file.
-
-```json
-{
-    "reward_classifier_pretrained_path": "path_to_your_pretrained_model"
-}
-```
-
-Run gym_manipulator.py to test the model.
-```bash
-python lerobot/scripts/rl/gym_manipulator.py --config_path lerobot/configs/env_config.json
-```
-
-The reward classifier will automatically provide rewards based on the visual input from the robot's cameras.
-
-## 2.5 Example Workflow
-
-1. **Create the configuration files**:
-   Create the necessary json configuration files for the reward classifier and the environment. Check the `json_examples` directory for examples.
-
-2. **Collect a dataset**:
-   ```bash
-   python lerobot/scripts/rl/gym_manipulator.py --config_path lerobot/configs/env_config.json
-   ```
-
-3. **Train the classifier**:
-   ```bash
-   python lerobot/scripts/train.py --config_path lerobot/configs/reward_classifier_train_config.json
-   ```
-
-4. **Test the classifier**:
-   ```bash
-   python lerobot/scripts/rl/gym_manipulator.py --config_path lerobot/configs/env_config.json
-   ```
-# 3. Using gym_hil Simulation Environments with LeRobot
-
-This guide explains how to use the `gym_hil` simulation environments as an alternative to real robots when working with the LeRobot framework for Human-In-the-Loop (HIL) reinforcement learning.
-
-`gym_hil` is a package that provides Gymnasium-compatible simulation environments specifically designed for Human-In-the-Loop reinforcement learning. These environments allow you to:
-
-- Train policies in simulation to test the RL stack before training on real robots
-
-- Collect demonstrations in sim using external devices like gamepads or keyboards
-- Perform human interventions during policy learning
-
-Currently, the main environment is a Franka Panda robot simulation based on MuJoCo, with tasks like picking up a cube.
-
-## 3.1 Installation
-
-First, install the `gym_hil` package within the LeRobot environment:
-
-```bash
-pip install gym_hil
-
-# Or in LeRobot
-cd lerobot
-pip install -e .[hilserl]
-```
-
-## 3.2 Configuration
-
-To use `gym_hil` with LeRobot, you need to create a configuration file. An example is provided in `gym_hil_env.json`. Key configuration sections include:
-
-### 3.2.1 Environment Type and Task
-
-```json
-{
-    "type": "hil",
-    "name": "franka_sim",
-    "task": "PandaPickCubeGamepad-v0",
-    "device": "cuda"
-}
-```
-
-Available tasks:
-- `PandaPickCubeBase-v0`: Basic environment
-- `PandaPickCubeGamepad-v0`: With gamepad control
-- `PandaPickCubeKeyboard-v0`: With keyboard control
-
-### 3.2.2 Gym Wrappers Configuration
-
-```json
-"wrapper": {
-    "gripper_penalty": -0.02,
-    "control_time_s": 15.0,
-    "use_gripper": true,
-    "fixed_reset_joint_positions": [0.0, 0.195, 0.0, -2.43, 0.0, 2.62, 0.785],
-    "end_effector_step_sizes": {
-        "x": 0.025,
-        "y": 0.025,
-        "z": 0.025
-    },
-    "control_mode": "gamepad"
-    }
-```
-
-Important parameters:
-- `gripper_penalty`: Penalty for excessive gripper movement
-- `use_gripper`: Whether to enable gripper control
-- `end_effector_step_sizes`: Size of the steps in the x,y,z axes of the end-effector
-- `control_mode`: Set to "gamepad" to use a gamepad controller
-
-## 3.3 Running with HIL RL of LeRobot
-
-### 3.3.1 Basic Usage
-
-To run the environment, set mode to null:
-
-```python
-python lerobot/scripts/rl/gym_manipulator.py --config_path path/to/gym_hil_env.json
-```
-
-### 3.3.2 Recording a Dataset
-
-To collect a dataset, set the mode to `record` whilst defining the repo_id and number of episodes to record:
-
-```python
-python lerobot/scripts/rl/gym_manipulator.py --config_path path/to/gym_hil_env.json
-```
-
-### 3.3.3 Training a Policy
-
-To train a policy, checkout the example json in `train_gym_hil_env.json` and run the actor and learner servers:
-
-```python
-python lerobot/scripts/rl/actor.py --config_path path/to/train_gym_hil_env.json
-```
-
-In a different terminal, run the learner server:
-
-```python
-python lerobot/scripts/rl/learner.py --config_path path/to/train_gym_hil_env.json
-```
-
-The simulation environment provides a safe and repeatable way to develop and test your Human-In-the-Loop reinforcement learning components before deploying to real robots.
-
-Paper citation:
-
-```
-@article{luo2024precise,
-  title={Precise and Dexterous Robotic Manipulation via Human-in-the-Loop Reinforcement Learning},
-  author={Luo, Jianlan and Xu, Charles and Wu, Jeffrey and Levine, Sergey},
-  journal={arXiv preprint arXiv:2410.21845},
-  year={2024}
-}
-```

docs/source/index.mdx

@@ -1,19 +0,0 @@
-<div class="flex justify-center">
-  <a target="_blank" href="https://huggingface.co/lerobot">
-      <img alt="HuggingFace Expert Acceleration Program" src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot-logo-thumbnail.png" style="width: 100%"></img>
-  </a>
-</div>
-
-# LeRobot
-
-**State-of-the-art machine learning for real-world robotics**
-
-🤗 LeRobot aims to provide models, datasets, and tools for real-world robotics in PyTorch. The goal is to lower the barrier for entry to robotics so that everyone can contribute and benefit from sharing datasets and pretrained models.
-
-🤗 LeRobot contains state-of-the-art approaches that have been shown to transfer to the real-world with a focus on imitation learning and reinforcement learning.
-
-🤗 LeRobot already provides a set of pretrained models, datasets with human collected demonstrations, and simulated environments so that everyone can get started.
-
-🤗 LeRobot hosts pretrained models and datasets on the LeRobot HuggingFace page.
-
-Join the LeRobot community on [Discord](https://discord.gg/s3KuuzsPFb)

docs/source/installation.mdx

@@ -1,70 +0,0 @@
-# Installation
-
-## Install LeRobot
-
-Currently only available from source.
-
-Download our source code:
-```bash
-git clone https://github.com/huggingface/lerobot.git
-cd lerobot
-```
-
-Create a virtual environment with Python 3.10, using [`Miniconda`](https://docs.anaconda.com/miniconda/install/#quick-command-line-install)
-```bash
-conda create -y -n lerobot python=3.10
-```
-
-Then activate your conda environment, you have to do this each time you open a shell to use lerobot:
-```bash
-conda activate lerobot
-```
-
-When using `miniconda`, install `ffmpeg` in your environment:
-```bash
-conda install ffmpeg -c conda-forge
-```
-
-> [!TIP]
-> This usually installs `ffmpeg 7.X` for your platform compiled with the `libsvtav1` encoder. If `libsvtav1` is not supported (check supported encoders with `ffmpeg -encoders`), you can:
->  - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
->  ```bash
->  conda install ffmpeg=7.1.1 -c conda-forge
->  ```
->  - _[On Linux only]_ If you want to bring your own ffmpeg: Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
-
-Install 🤗 LeRobot:
-```bash
-pip install -e .
-```
-
-### Troubleshooting
-If you encounter build errors, you may need to install additional dependencies: `cmake`, `build-essential`, and `ffmpeg libs`.
-To install these for linux run:
-```bash
-sudo apt-get install cmake build-essential python-dev pkg-config libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev pkg-config
-```
-For other systems, see: [Compiling PyAV](https://pyav.org/docs/develop/overview/installation.html#bring-your-own-ffmpeg)
-
-## Optional dependencies
-
-LeRobot provides optional extras for specific functionalities. Multiple extras can be combined (e.g., `.[aloha,feetech]`). For all available extras, refer to `pyproject.toml`.
-
-### Simulations
-Install environment packages: `aloha` ([gym-aloha](https://github.com/huggingface/gym-aloha)), `xarm` ([gym-xarm](https://github.com/huggingface/gym-xarm)), or `pusht` ([gym-pusht](https://github.com/huggingface/gym-pusht))
-Example:
-```bash
-pip install -e ".[aloha]" # or "[pusht]" for example
-```
-
-### Motor Control
-For Koch v1.1 install the Dynamixel SDK, for SO100/SO101/Moss install the Feetech SDK.
-```bash
-pip install -e ".[feetech]" # or "[dynamixel]" for example
-```
-
-### Experiment Tracking
-To use [Weights and Biases](https://docs.wandb.ai/quickstart) for experiment tracking, log in with
-```bash
-wandb login
-```

docs/source/koch.mdx

@@ -1 +0,0 @@
-../../lerobot/common/robots/koch_follower/koch.mdx

docs/source/lekiwi.mdx

@@ -1 +0,0 @@
-../../lerobot/common/robots/lekiwi/lekiwi.mdx

docs/source/so100.mdx

@@ -1 +0,0 @@
-../../lerobot/common/robots/so100_follower/so100.mdx

docs/source/so101.mdx

@@ -1 +0,0 @@
-../../lerobot/common/robots/so101_follower/so101.mdx

examples/10_use_so100.md

@@ -0,0 +1,415 @@
+# Using the [SO-100](https://github.com/TheRobotStudio/SO-ARM100) with LeRobot
+
+## Table of Contents
+
+  - [A. Source the parts](#a-source-the-parts)
+  - [B. Install LeRobot](#b-install-lerobot)
+  - [C. Configure the motors](#c-configure-the-motors)
+  - [D. Assemble the arms](#d-assemble-the-arms)
+  - [E. Calibrate](#e-calibrate)
+  - [F. Teleoperate](#f-teleoperate)
+  - [G. Record a dataset](#g-record-a-dataset)
+  - [H. Visualize a dataset](#h-visualize-a-dataset)
+  - [I. Replay an episode](#i-replay-an-episode)
+  - [J. Train a policy](#j-train-a-policy)
+  - [K. Evaluate your policy](#k-evaluate-your-policy)
+  - [L. More Information](#l-more-information)
+
+## A. Source the parts
+
+Follow this [README](https://github.com/TheRobotStudio/SO-ARM100). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts,
+and advice if it's your first time printing or if you don't own a 3D printer.
+
+Before assembling, you will first need to configure your motors. To this end, we provide a nice script, so let's first install LeRobot. After configuration, we will also guide you through assembly.
+
+## B. Install LeRobot
+
+> [!TIP]
+> We use the Command Prompt (cmd) quite a lot. If you are not comfortable using the cmd or want to brush up using the command line you can have a look here: [Command line crash course](https://developer.mozilla.org/en-US/docs/Learn_web_development/Getting_started/Environment_setup/Command_line)
+
+On your computer:
+
+#### 1. [Install Miniconda](https://docs.anaconda.com/miniconda/install/#quick-command-line-install):
+
+#### 2. Restart shell
+Copy paste in your shell: `source ~/.bashrc` or for Mac: `source ~/.bash_profile` or `source ~/.zshrc` if you're using zshell
+
+#### 3. Create and activate a fresh conda environment for lerobot
+
+<details>
+<summary><strong>Video install instructions</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/17172d3b-3b64-4b80-9cf1-b2b7c5cbd236"></video>
+
+</details>
+
+```bash
+conda create -y -n lerobot python=3.10
+```
+
+Then activate your conda environment (do this each time you open a shell to use lerobot!):
+```bash
+conda activate lerobot
+```
+
+#### 4. Clone LeRobot:
+```bash
+git clone https://github.com/huggingface/lerobot.git ~/lerobot
+```
+
+#### 5. Install LeRobot with dependencies for the feetech motors:
+```bash
+cd ~/lerobot && pip install -e ".[feetech]"
+```
+
+*EXTRA: For Linux only (not Mac)*: install extra dependencies for recording datasets:
+```bash
+conda install -y -c conda-forge ffmpeg
+pip uninstall -y opencv-python
+conda install -y -c conda-forge "opencv>=4.10.0"
+```
+Great :hugs:! You are now done installing LeRobot and we can begin assembling the SO100 arms :robot:.
+Every time you now want to use LeRobot you can go to the `~/lerobot` folder where we installed LeRobot and run one of the commands.
+## C. Configure the motors
+
+> [!NOTE]
+> Throughout this tutorial you will find videos on how to do the steps, the full video tutorial can be found here: [assembly video](https://www.youtube.com/watch?v=FioA2oeFZ5I).
+
+### 1. Find the USB ports associated to each arm
+
+Designate one bus servo adapter and 6 motors for your leader arm, and similarly the other bus servo adapter and 6 motors for the follower arm. It's convenient to label them and write on each motor if it's for the follower `F` or for the leader `L` and it's ID from 1 to 6 (F1...F6 and L1...L6).
+
+#### a. Run the script to find port
+
+<details>
+<summary><strong>Video finding port</strong></summary>
+  <video src="https://github.com/user-attachments/assets/4a21a14d-2046-4805-93c4-ee97a30ba33f"></video>
+  <video src="https://github.com/user-attachments/assets/1cc3aecf-c16d-4ff9-aec7-8c175afbbce2"></video>
+</details>
+
+To find the port for each bus servo adapter, run the utility script:
+```bash
+python lerobot/scripts/find_motors_bus_port.py
+```
+
+#### b. Example outputs
+
+Example output when identifying the leader arm's port (e.g., `/dev/tty.usbmodem575E0031751` on Mac, or possibly `/dev/ttyACM0` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0031751
+Reconnect the usb cable.
+```
+Example output when identifying the follower arm's port (e.g., `/dev/tty.usbmodem575E0032081`, or possibly `/dev/ttyACM1` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0032081
+Reconnect the usb cable.
+```
+
+#### c. Troubleshooting
+On Linux, you might need to give access to the USB ports by running:
+```bash
+sudo chmod 666 /dev/ttyACM0
+sudo chmod 666 /dev/ttyACM1
+```
+
+#### d. Update config file
+
+IMPORTANTLY: Now that you have your ports, update the **port** default values of [`SO100RobotConfig`](../lerobot/common/robot_devices/robots/configs.py). You will find something like:
+```python
+@RobotConfig.register_subclass("so100")
+@dataclass
+class So100RobotConfig(ManipulatorRobotConfig):
+    calibration_dir: str = ".cache/calibration/so100"
+    # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+    # Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+    # the number of motors in your follower arms.
+    max_relative_target: int | None = None
+
+    leader_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/tty.usbmodem58760431091",  <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+
+    follower_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/tty.usbmodem585A0076891",  <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+```
+
+### 2. Assembling the Base
+Let's begin with assembling the follower arm base
+
+#### a. Set IDs for all 12 motors
+
+<details>
+<summary><strong>Video configuring motor</strong></summary>
+  <video src="https://github.com/user-attachments/assets/ef9b3317-2e11-4858-b9d3-f0a02fb48ecf"></video>
+  <video src="https://github.com/user-attachments/assets/f36b5ed5-c803-4ebe-8947-b39278776a0d"></video>
+</details>
+
+Plug your first motor F1 and run this script to set its ID to 1. It will also set its present position to 2048, so expect your motor to rotate. Replace the text after --port to the corresponding follower control board port and run this command in cmd:
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 1
+```
+
+> [!NOTE]
+> These motors are currently limited. They can take values between 0 and 4096 only, which corresponds to a full turn. They can't turn more than that. 2048 is at the middle of this range, so we can take -2048 steps (180 degrees anticlockwise) and reach the maximum range, or take +2048 steps (180 degrees clockwise) and reach the maximum range. The configuration step also sets the homing offset to 0, so that if you misassembled the arm, you can always update the homing offset to account for a shift up to ± 2048 steps (± 180 degrees).
+
+Then unplug your motor and plug the second motor and set its ID to 2.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 2
+```
+
+Redo the process for all your motors until ID 6. Do the same for the 6 motors of the leader arm.
+
+
+#### b. Remove the gears of the 6 leader motors
+
+<details>
+<summary><strong>Video removing gears</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/0c95b88c-5b85-413d-ba19-aee2f864f2a7"></video>
+
+</details>
+
+
+Follow the video for removing gears. You need to remove the gear for the motors of the leader arm. As a result, you will only use the position encoding of the motor and reduce friction to more easily operate the leader arm.
+
+#### c. Add motor horn to all 12 motors
+
+<details>
+<summary><strong>Video adding motor horn</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/ef3391a4-ad05-4100-b2bd-1699bf86c969"></video>
+
+</details>
+
+Follow the video for adding the motor horn. For SO-100, you need to align the holes on the motor horn to the motor spline to be approximately 1:30, 4:30, 7:30 and 10:30.
+Try to avoid rotating the motor while doing so to keep position 2048 set during configuration. It is especially tricky for the leader motors as it is more sensible without the gears, but it's ok if it's a bit rotated.
+
+## D. Assemble the arms
+
+<details>
+<summary><strong>Video assembling arms</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/488a39de-0189-4461-9de3-05b015f90cca"></video>
+
+</details>
+
+Follow the video for assembling the arms. It is important to insert the cables into the motor that is being assembled before you assemble the motor into the arm! Inserting the cables beforehand is much easier than doing this afterward. The first arm should take a bit more than 1 hour to assemble, but once you get used to it, you can do it under 1 hour for the second arm.
+
+## E. Calibrate
+
+Next, you'll need to calibrate your SO-100 robot to ensure that the leader and follower arms have the same position values when they are in the same physical position. This calibration is essential because it allows a neural network trained on one SO-100 robot to work on another.
+
+#### a. Manual calibration of follower arm
+
+> [!IMPORTANT]
+> Contrarily to step 6 of the [assembly video](https://youtu.be/FioA2oeFZ5I?t=724) which illustrates the auto calibration, we will actually do manual calibration of follower for now.
+
+You will need to move the follower arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/so100/follower_zero.webp?raw=true" alt="SO-100 follower arm zero position" title="SO-100 follower arm zero position" style="width:100%;"> | <img src="../media/so100/follower_rotated.webp?raw=true" alt="SO-100 follower arm rotated position" title="SO-100 follower arm rotated position" style="width:100%;"> | <img src="../media/so100/follower_rest.webp?raw=true" alt="SO-100 follower arm rest position" title="SO-100 follower arm rest position" style="width:100%;"> |
+
+Make sure both arms are connected and run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_follower"]'
+```
+
+#### b. Manual calibration of leader arm
+Follow step 6 of the [assembly video](https://youtu.be/FioA2oeFZ5I?t=724) which illustrates the manual calibration. You will need to move the leader arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/so100/leader_zero.webp?raw=true" alt="SO-100 leader arm zero position" title="SO-100 leader arm zero position" style="width:100%;"> | <img src="../media/so100/leader_rotated.webp?raw=true" alt="SO-100 leader arm rotated position" title="SO-100 leader arm rotated position" style="width:100%;"> | <img src="../media/so100/leader_rest.webp?raw=true" alt="SO-100 leader arm rest position" title="SO-100 leader arm rest position" style="width:100%;"> |
+
+Run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_leader"]'
+```
+
+## F. Teleoperate
+
+**Simple teleop**
+Then you are ready to teleoperate your robot! Run this simple script (it won't connect and display the cameras):
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --robot.cameras='{}' \
+  --control.type=teleoperate
+```
+
+
+#### a. Teleop with displaying cameras
+Follow [this guide to setup your cameras](https://github.com/huggingface/lerobot/blob/main/examples/7_get_started_with_real_robot.md#c-add-your-cameras-with-opencvcamera). Then you will be able to display the cameras on your computer while you are teleoperating by running the following code. This is useful to prepare your setup before recording your first dataset.
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --control.type=teleoperate
+```
+
+## G. Record a dataset
+
+Once you're familiar with teleoperation, you can record your first dataset with SO-100.
+
+If you want to use the Hugging Face hub features for uploading your dataset and you haven't previously done it, make sure you've logged in using a write-access token, which can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens):
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+
+Store your Hugging Face repository name in a variable to run these commands:
+```bash
+HF_USER=$(huggingface-cli whoami | head -n 1)
+echo $HF_USER
+```
+
+Record 2 episodes and upload your dataset to the hub:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/so100_test \
+  --control.tags='["so100","tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=2 \
+  --control.push_to_hub=true
+```
+
+Note: You can resume recording by adding `--control.resume=true`.
+
+## H. Visualize a dataset
+
+If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
+```bash
+echo ${HF_USER}/so100_test
+```
+
+If you didn't upload with `--control.push_to_hub=false`, you can also visualize it locally with (a window can be opened in the browser `http://127.0.0.1:9090` with the visualization tool):
+```bash
+python lerobot/scripts/visualize_dataset_html.py \
+  --repo-id ${HF_USER}/so100_test \
+  --local-files-only 1
+```
+
+## I. Replay an episode
+
+Now try to replay the first episode on your robot:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --control.type=replay \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/so100_test \
+  --control.episode=0
+```
+
+## J. Train a policy
+
+To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
+```bash
+python lerobot/scripts/train.py \
+  --dataset.repo_id=${HF_USER}/so100_test \
+  --policy.type=act \
+  --output_dir=outputs/train/act_so100_test \
+  --job_name=act_so100_test \
+  --device=cuda \
+  --wandb.enable=true
+```
+
+Let's explain it:
+1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/so100_test`.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `device=cuda` since we are training on a Nvidia GPU, but you could use `device=mps` to train on Apple silicon.
+5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
+
+Training should take several hours. You will find checkpoints in `outputs/train/act_so100_test/checkpoints`.
+
+## K. Evaluate your policy
+
+You can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so100 \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/eval_act_so100_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=10 \
+  --control.push_to_hub=true \
+  --control.policy.path=outputs/train/act_so100_test/checkpoints/last/pretrained_model
+```
+
+As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
+1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_act_so100_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_so100_test`).
+2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_so100_test`).
+
+## L. More Information
+
+Follow this [previous tutorial](https://github.com/huggingface/lerobot/blob/main/examples/7_get_started_with_real_robot.md#4-train-a-policy-on-your-data) for a more in-depth tutorial on controlling real robots with LeRobot.
+
+> [!TIP]
+>  If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb) in the channel [`#so100-arm`](https://discord.com/channels/1216765309076115607/1237741463832363039).

examples/11_use_lekiwi.md

@@ -0,0 +1,463 @@
+# Using the [LeKiwi](https://github.com/SIGRobotics-UIUC/LeKiwi) Robot with LeRobot
+
+## Table of Contents
+
+  - [A. Source the parts](#a-source-the-parts)
+  - [B. Install software Pi](#b-install-software-on-pi)
+  - [C. Setup LeRobot laptop/pc](#c-install-lerobot-on-laptop)
+  - [D. Assemble the arms](#d-assembly)
+  - [E. Calibrate](#e-calibration)
+  - [F. Teleoperate](#f-teleoperate)
+  - [G. Record a dataset](#g-record-a-dataset)
+  - [H. Visualize a dataset](#h-visualize-a-dataset)
+  - [I. Replay an episode](#i-replay-an-episode)
+  - [J. Train a policy](#j-train-a-policy)
+  - [K. Evaluate your policy](#k-evaluate-your-policy)
+
+> [!TIP]
+>  If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb) in the channel [`#mobile-so-100-arm`](https://discord.com/channels/1216765309076115607/1318390825528332371).
+
+## A. Source the parts
+
+Follow this [README](https://github.com/SIGRobotics-UIUC/LeKiwi). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts, and advice if it's your first time printing or if you don't own a 3D printer.
+
+Before assembling, you will first need to configure your motors. To this end, we provide a nice script, so let's first install LeRobot. After configuration, we will also guide you through assembly.
+
+## B. Install software on Pi
+Now we have to setup the remote PC that will run on the LeKiwi Robot. This is normally a Raspberry Pi, but can be any PC that can run on 5V and has enough usb ports (2 or more) for the cameras and motor control board.
+
+### Install OS
+For setting up the Raspberry Pi and its SD-card see: [Setup PI](https://www.raspberrypi.com/documentation/computers/getting-started.html). Here is explained how to download the [Imager](https://www.raspberrypi.com/software/) to install Raspberry Pi OS or Ubuntu.
+
+### Setup SSH
+After setting up your Pi, you should enable and setup [SSH](https://www.raspberrypi.com/news/coding-on-raspberry-pi-remotely-with-visual-studio-code/) (Secure Shell Protocol) so you can login into the Pi from your laptop without requiring a screen, keyboard and mouse in the Pi. A great tutorial on how to do this can be found [here](https://www.raspberrypi.com/documentation/computers/remote-access.html#ssh). Logging into your Pi can be done in your Command Prompt (cmd) or if you use VSCode you can use [this](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-ssh) extension.
+
+### Install LeRobot
+
+On your Raspberry Pi:
+
+#### 1. [Install Miniconda](https://docs.anaconda.com/miniconda/install/#quick-command-line-install):
+
+#### 2. Restart shell
+Copy paste in your shell: `source ~/.bashrc` or for Mac: `source ~/.bash_profile` or `source ~/.zshrc` if you're using zshell
+
+#### 3. Create and activate a fresh conda environment for lerobot
+
+<details>
+<summary><strong>Video install instructions</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/17172d3b-3b64-4b80-9cf1-b2b7c5cbd236"></video>
+
+</details>
+
+```bash
+conda create -y -n lerobot python=3.10
+```
+
+Then activate your conda environment (do this each time you open a shell to use lerobot!):
+```bash
+conda activate lerobot
+```
+
+#### 4. Clone LeRobot:
+```bash
+git clone https://github.com/huggingface/lerobot.git ~/lerobot
+```
+
+#### 5. Install LeRobot with dependencies for the feetech motors:
+```bash
+cd ~/lerobot && pip install -e ".[feetech]"
+```
+
+## C. Install LeRobot on laptop
+If you already have install LeRobot on your laptop you can skip this step, otherwise please follow along as we do the same steps we did on the Pi.
+
+> [!TIP]
+> We use the Command Prompt (cmd) quite a lot. If you are not comfortable using the cmd or want to brush up using the command line you can have a look here: [Command line crash course](https://developer.mozilla.org/en-US/docs/Learn_web_development/Getting_started/Environment_setup/Command_line)
+
+On your computer:
+
+#### 1. [Install Miniconda](https://docs.anaconda.com/miniconda/install/#quick-command-line-install):
+
+#### 2. Restart shell
+Copy paste in your shell: `source ~/.bashrc` or for Mac: `source ~/.bash_profile` or `source ~/.zshrc` if you're using zshell
+
+#### 3. Create and activate a fresh conda environment for lerobot
+
+<details>
+<summary><strong>Video install instructions</strong></summary>
+
+<video src="https://github.com/user-attachments/assets/17172d3b-3b64-4b80-9cf1-b2b7c5cbd236"></video>
+
+</details>
+
+```bash
+conda create -y -n lerobot python=3.10
+```
+
+Then activate your conda environment (do this each time you open a shell to use lerobot!):
+```bash
+conda activate lerobot
+```
+
+#### 4. Clone LeRobot:
+```bash
+git clone https://github.com/huggingface/lerobot.git ~/lerobot
+```
+
+#### 5. Install LeRobot with dependencies for the feetech motors:
+```bash
+cd ~/lerobot && pip install -e ".[feetech]"
+```
+
+*EXTRA: For Linux only (not Mac)*: install extra dependencies for recording datasets:
+```bash
+conda install -y -c conda-forge ffmpeg
+pip uninstall -y opencv-python
+conda install -y -c conda-forge "opencv>=4.10.0"
+```
+Great :hugs:! You are now done installing LeRobot and we can begin assembling the SO100 arms and Mobile base :robot:.
+Every time you now want to use LeRobot you can go to the `~/lerobot` folder where we installed LeRobot and run one of the commands.
+
+# D. Assembly
+
+First we will assemble the two SO100 arms. One to attach to the mobile base and one for teleoperation. Then we will assemble the mobile base.
+
+## SO100 Arms
+### Configure motors
+The instructions for configuring the motors can be found [Here](https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md#c-configure-the-motors) in step C of the SO100 tutorial. Besides the ID's for the arm motors we also need to set the motor ID's for the mobile base. These needs to be in a specific order to work. Below an image of the motor ID's and motor mounting positions for the mobile base. Note that we only use one Motor Control board on LeKiwi. This means the motor ID's for the wheels are 7, 8 and 9.
+
+<img src="../media/lekiwi/motor_ids.webp?raw=true" alt="Motor ID's for mobile robot" title="Motor ID's for mobile robot" width="60%">
+
+### Assemble arms
+[Assemble arms instruction](https://github.com/huggingface/lerobot/blob/main/examples/10_use_so100.md#d-assemble-the-arms)
+
+## Mobile base (LeKiwi)
+[Assemble LeKiwi](https://github.com/SIGRobotics-UIUC/LeKiwi)
+
+### Update config
+Both config files on the LeKiwi LeRobot and on the laptop should be the same. First we should find the Ip address of the Raspberry Pi of the mobile manipulator. This is the same Ip address used in SSH. We also need the usb port of the control board of the leader arm on the laptop and the port of the control board on LeKiwi. We can find these ports with the following script.
+
+#### a. Run the script to find port
+
+<details>
+<summary><strong>Video finding port</strong></summary>
+  <video src="https://github.com/user-attachments/assets/4a21a14d-2046-4805-93c4-ee97a30ba33f"></video>
+  <video src="https://github.com/user-attachments/assets/1cc3aecf-c16d-4ff9-aec7-8c175afbbce2"></video>
+</details>
+
+To find the port for each bus servo adapter, run the utility script:
+```bash
+python lerobot/scripts/find_motors_bus_port.py
+```
+
+#### b. Example outputs
+
+Example output when identifying the leader arm's port (e.g., `/dev/tty.usbmodem575E0031751` on Mac, or possibly `/dev/ttyACM0` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0031751
+Reconnect the usb cable.
+```
+Example output when identifying the follower arm's port (e.g., `/dev/tty.usbmodem575E0032081`, or possibly `/dev/ttyACM1` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0032081
+Reconnect the usb cable.
+```
+
+#### c. Troubleshooting
+On Linux, you might need to give access to the USB ports by running:
+```bash
+sudo chmod 666 /dev/ttyACM0
+sudo chmod 666 /dev/ttyACM1
+```
+
+#### d. Update config file
+
+IMPORTANTLY: Now that you have your ports of leader and follower arm and ip address of the mobile-so100, update the **ip** in Network configuration, **port** in leader_arms and **port** in lekiwi. In the [`LeKiwiRobotConfig`](../lerobot/common/robot_devices/robots/configs.py) file. Where you will find something like:
+```python
+@RobotConfig.register_subclass("lekiwi")
+@dataclass
+class LeKiwiRobotConfig(RobotConfig):
+    # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+    # Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+    # the number of motors in your follower arms.
+    max_relative_target: int | None = None
+
+    # Network Configuration
+    ip: str = "172.17.133.91"
+    port: int = 5555
+    video_port: int = 5556
+
+    cameras: dict[str, CameraConfig] = field(
+        default_factory=lambda: {
+            "mobile": OpenCVCameraConfig(camera_index="/dev/video0", fps=30, width=640, height=480),
+            "mobile2": OpenCVCameraConfig(camera_index="/dev/video2", fps=30, width=640, height=480),
+        }
+    )
+
+    calibration_dir: str = ".cache/calibration/lekiwi"
+
+    leader_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/tty.usbmodem585A0077581",
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+
+    follower_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/ttyACM0",
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                    "left_wheel": (7, "sts3215"),
+                    "back_wheel": (8, "sts3215"),
+                    "right_wheel": (9, "sts3215"),
+                },
+            ),
+        }
+    )
+
+    mock: bool = False
+```
+
+# E. Calibration
+Now we have to calibrate the leader arm and the follower arm. The wheel motors don't have to be calibrated.
+
+
+### Calibrate follower arm (on mobile base)
+> [!IMPORTANT]
+> Contrarily to step 6 of the [assembly video](https://youtu.be/FioA2oeFZ5I?t=724) which illustrates the auto calibration, we will actually do manual calibration of follower for now.
+
+You will need to move the follower arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/lekiwi/mobile_calib_zero.webp?raw=true" alt="SO-100 follower arm zero position" title="SO-100 follower arm zero position" style="width:100%;"> | <img src="../media/lekiwi/mobile_calib_rotated.webp?raw=true" alt="SO-100 follower arm rotated position" title="SO-100 follower arm rotated position" style="width:100%;"> | <img src="../media/lekiwi/mobile_calib_rest.webp?raw=true" alt="SO-100 follower arm rest position" title="SO-100 follower arm rest position" style="width:100%;"> |
+
+Make sure the arm is connected to the Raspberry Pi and run this script (on the Raspberry Pi) to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_follower"]'
+```
+
+### Calibrate leader arm
+Then to calibrate the leader arm (which is attached to the laptop/pc). You will need to move the leader arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/so100/leader_zero.webp?raw=true" alt="SO-100 leader arm zero position" title="SO-100 leader arm zero position" style="width:100%;"> | <img src="../media/so100/leader_rotated.webp?raw=true" alt="SO-100 leader arm rotated position" title="SO-100 leader arm rotated position" style="width:100%;"> | <img src="../media/so100/leader_rest.webp?raw=true" alt="SO-100 leader arm rest position" title="SO-100 leader arm rest position" style="width:100%;"> |
+
+Run this script (on your laptop/pc) to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_leader"]'
+```
+
+# F. Teleoperate
+To teleoperate SSH into your Raspberry Pi, and run `conda activate lerobot` and this script:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --control.type=remote_robot
+```
+
+Then on your laptop, also run `conda activate lerobot` and this script:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --control.type=teleoperate \
+  --control.fps=30
+```
+
+You should see on your laptop something like this: ```[INFO] Connected to remote robot at tcp://172.17.133.91:5555 and video stream at tcp://172.17.133.91:5556.``` Now you can move the leader arm and use the keyboard (w,a,s,d) to drive forward, left, backwards, right. And use (z,x) to turn left or turn right. You can use (r,f) to increase and decrease the speed of the mobile robot. There are three speed modes, see the table below:
+| Speed Mode | Linear Speed (m/s) | Rotation Speed (deg/s) |
+|------------|-------------------|-----------------------|
+| Fast      | 0.4               | 90                    |
+| Medium    | 0.25              | 60                    |
+| Slow      | 0.1               | 30                    |
+
+
+| Key  | Action                         |
+|------|--------------------------------|
+| W    | Move forward                   |
+| A    | Move left                       |
+| S    | Move backward                   |
+| D    | Move right                      |
+| Z    | Turn left                       |
+| X    | Turn right                      |
+| R    | Increase speed                  |
+| F    | Decrease speed                  |
+
+> [!TIP]
+>  If you use a different keyboard you can change the keys for each command in the [`LeKiwiRobotConfig`](../lerobot/common/robot_devices/robots/configs.py).
+
+## Troubleshoot communication
+
+If you are having trouble connecting to the Mobile SO100, follow these steps to diagnose and resolve the issue.
+
+### 1. Verify IP Address Configuration
+Make sure that the correct ip for the Pi is set in the configuration file. To check the Raspberry Pi's IP address, run (on the Pi command line):
+```bash
+hostname -I
+```
+
+### 2. Check if Pi is reachable from laptop/pc
+Try pinging the Raspberry Pi from your laptop:
+```bach
+ping <your_pi_ip_address>
+```
+
+If the ping fails:
+- Ensure the Pi is powered on and connected to the same network.
+- Check if SSH is enabled on the Pi.
+
+### 3. Try SSH connection
+If you can't SSH into the Pi, it might not be properly connected. Use:
+```bash
+ssh <your_pi_user_name>@<your_pi_ip_address>
+```
+If you get a connection error:
+- Ensure SSH is enabled on the Pi by running:
+  ```bash
+  sudo raspi-config
+  ```
+  Then navigate to: **Interfacing Options -> SSH** and enable it.
+
+### 4. Same config file
+Make sure the configuration file on both your laptop/pc and the Raspberry Pi is the same.
+
+# G. Record a dataset
+Once you're familiar with teleoperation, you can record your first dataset with LeKiwi.
+
+If you want to use the Hugging Face hub features for uploading your dataset and you haven't previously done it, make sure you've logged in using a write-access token, which can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens):
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+
+Store your Hugging Face repository name in a variable to run these commands:
+```bash
+HF_USER=$(huggingface-cli whoami | head -n 1)
+echo $HF_USER
+```
+
+Record 2 episodes and upload your dataset to the hub:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/lekiwi_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=2 \
+  --control.push_to_hub=true
+```
+
+Note: You can resume recording by adding `--control.resume=true`.
+
+# H. Visualize a dataset
+
+If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
+```bash
+echo ${HF_USER}/lekiwi_test
+```
+
+If you didn't upload with `--control.push_to_hub=false`, you can also visualize it locally with (a window can be opened in the browser `http://127.0.0.1:9090` with the visualization tool):
+```bash
+python lerobot/scripts/visualize_dataset_html.py \
+  --repo-id ${HF_USER}/lekiwi_test \
+  --local-files-only 1
+```
+
+# I. Replay an episode
+Now try to replay the first episode on your robot:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --control.type=replay \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/lekiwi_test \
+  --control.episode=0
+```
+
+## J. Train a policy
+
+To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
+```bash
+python lerobot/scripts/train.py \
+  --dataset.repo_id=${HF_USER}/lekiwi_test \
+  --policy.type=act \
+  --output_dir=outputs/train/act_lekiwi_test \
+  --job_name=act_lekiwi_test \
+  --device=cuda \
+  --wandb.enable=true
+```
+
+Let's explain it:
+1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/lekiwi_test`.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `device=cuda` since we are training on a Nvidia GPU, but you could use `device=mps` to train on Apple silicon.
+5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
+
+Training should take several hours. You will find checkpoints in `outputs/train/act_lekiwi_test/checkpoints`.
+
+## K. Evaluate your policy
+
+You can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=lekiwi \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Drive to the red block and pick it up" \
+  --control.repo_id=${HF_USER}/eval_act_lekiwi_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=10 \
+  --control.push_to_hub=true \
+  --control.policy.path=outputs/train/act_lekiwi_test/checkpoints/last/pretrained_model
+```
+
+As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
+1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_act_lekiwi_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_lekiwi_test`).
+2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_lekiwi_test`).

examples/11_use_moss.md

@@ -0,0 +1,335 @@
+This tutorial explains how to use [Moss v1](https://github.com/jess-moss/moss-robot-arms) with LeRobot.
+
+## Source the parts
+
+Follow this [README](https://github.com/jess-moss/moss-robot-arms). It contains the bill of materials with link to source the parts, as well as the instructions to 3D print the parts and advice if it's your first time printing or if you don't own a 3D printer already.
+
+**Important**: Before assembling, you will first need to configure your motors. To this end, we provide a nice script, so let's first install LeRobot. After configuration, we will also guide you through assembly.
+
+## Install LeRobot
+
+On your computer:
+
+1. [Install Miniconda](https://docs.anaconda.com/miniconda/#quick-command-line-install):
+```bash
+mkdir -p ~/miniconda3
+wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh -O ~/miniconda3/miniconda.sh
+bash ~/miniconda3/miniconda.sh -b -u -p ~/miniconda3
+rm ~/miniconda3/miniconda.sh
+~/miniconda3/bin/conda init bash
+```
+
+2. Restart shell or `source ~/.bashrc`
+
+3. Create and activate a fresh conda environment for lerobot
+```bash
+conda create -y -n lerobot python=3.10 && conda activate lerobot
+```
+
+4. Clone LeRobot:
+```bash
+git clone https://github.com/huggingface/lerobot.git ~/lerobot
+```
+
+5. Install LeRobot with dependencies for the feetech motors:
+```bash
+cd ~/lerobot && pip install -e ".[feetech]"
+```
+
+For Linux only (not Mac), install extra dependencies for recording datasets:
+```bash
+conda install -y -c conda-forge ffmpeg
+pip uninstall -y opencv-python
+conda install -y -c conda-forge "opencv>=4.10.0"
+```
+
+## Configure the motors
+
+Follow steps 1 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic) which illustrates the use of our scripts below.
+
+**Find USB ports associated to your arms**
+To find the correct ports for each arm, run the utility script twice:
+```bash
+python lerobot/scripts/find_motors_bus_port.py
+```
+
+Example output when identifying the leader arm's port (e.g., `/dev/tty.usbmodem575E0031751` on Mac, or possibly `/dev/ttyACM0` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0031751
+Reconnect the usb cable.
+```
+
+Example output when identifying the follower arm's port (e.g., `/dev/tty.usbmodem575E0032081`, or possibly `/dev/ttyACM1` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0032081
+Reconnect the usb cable.
+```
+
+Troubleshooting: On Linux, you might need to give access to the USB ports by running:
+```bash
+sudo chmod 666 /dev/ttyACM0
+sudo chmod 666 /dev/ttyACM1
+```
+
+#### Update config file
+
+IMPORTANTLY: Now that you have your ports, update the **port** default values of [`MossRobotConfig`](../lerobot/common/robot_devices/robots/configs.py). You will find something like:
+```python
+@RobotConfig.register_subclass("moss")
+@dataclass
+class MossRobotConfig(ManipulatorRobotConfig):
+    calibration_dir: str = ".cache/calibration/moss"
+    # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+    # Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+    # the number of motors in your follower arms.
+    max_relative_target: int | None = None
+
+    leader_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/tty.usbmodem58760431091",  <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+
+    follower_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+                port="/dev/tty.usbmodem585A0076891",  <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+```
+
+**Configure your motors**
+Plug your first motor and run this script to set its ID to 1. It will also set its present position to 2048, so expect your motor to rotate:
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 1
+```
+
+Note: These motors are currently limitated. They can take values between 0 and 4096 only, which corresponds to a full turn. They can't turn more than that. 2048 is at the middle of this range, so we can take -2048 steps (180 degrees anticlockwise) and reach the maximum range, or take +2048 steps (180 degrees clockwise) and reach the maximum range. The configuration step also sets the homing offset to 0, so that if you misassembled the arm, you can always update the homing offset to account for a shift up to ± 2048 steps (± 180 degrees).
+
+Then unplug your motor and plug the second motor and set its ID to 2.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 2
+```
+
+Redo the process for all your motors until ID 6. Do the same for the 6 motors of the leader arm.
+
+**Remove the gears of the 6 leader motors**
+Follow step 2 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic). You need to remove the gear for the motors of the leader arm. As a result, you will only use the position encoding of the motor and reduce friction to more easily operate the leader arm.
+
+**Add motor horn to the motors**
+Follow step 3 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic). For Moss v1, you need to align the holes on the motor horn to the motor spline to be approximately 3, 6, 9 and 12 o'clock.
+Try to avoid rotating the motor while doing so to keep position 2048 set during configuration. It is especially tricky for the leader motors as it is more sensible without the gears, but it's ok if it's a bit rotated.
+
+## Assemble the arms
+
+Follow step 4 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic). The first arm should take a bit more than 1 hour to assemble, but once you get use to it, you can do it under 1 hour for the second arm.
+
+## Calibrate
+
+Next, you'll need to calibrate your Moss v1 robot to ensure that the leader and follower arms have the same position values when they are in the same physical position. This calibration is essential because it allows a neural network trained on one Moss v1 robot to work on another.
+
+**Manual calibration of follower arm**
+/!\ Contrarily to step 6 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic) which illustrates the auto calibration, we will actually do manual calibration of follower for now.
+
+You will need to move the follower arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/moss/follower_zero.webp?raw=true" alt="Moss v1 follower arm zero position" title="Moss v1 follower arm zero position" style="width:100%;"> | <img src="../media/moss/follower_rotated.webp?raw=true" alt="Moss v1 follower arm rotated position" title="Moss v1 follower arm rotated position" style="width:100%;"> | <img src="../media/moss/follower_rest.webp?raw=true" alt="Moss v1 follower arm rest position" title="Moss v1 follower arm rest position" style="width:100%;"> |
+
+Make sure both arms are connected and run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_follower"]'
+```
+
+**Manual calibration of leader arm**
+Follow step 6 of the [assembly video](https://www.youtube.com/watch?v=DA91NJOtMic) which illustrates the manual calibration. You will need to move the leader arm to these positions sequentially:
+
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
+| <img src="../media/moss/leader_zero.webp?raw=true" alt="Moss v1 leader arm zero position" title="Moss v1 leader arm zero position" style="width:100%;"> | <img src="../media/moss/leader_rotated.webp?raw=true" alt="Moss v1 leader arm rotated position" title="Moss v1 leader arm rotated position" style="width:100%;"> | <img src="../media/moss/leader_rest.webp?raw=true" alt="Moss v1 leader arm rest position" title="Moss v1 leader arm rest position" style="width:100%;"> |
+
+Run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_leader"]'
+```
+
+## Teleoperate
+
+**Simple teleop**
+Then you are ready to teleoperate your robot! Run this simple script (it won't connect and display the cameras):
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --robot.cameras='{}' \
+  --control.type=teleoperate
+```
+
+
+**Teleop with displaying cameras**
+Follow [this guide to setup your cameras](https://github.com/huggingface/lerobot/blob/main/examples/7_get_started_with_real_robot.md#c-add-your-cameras-with-opencvcamera). Then you will be able to display the cameras on your computer while you are teleoperating by running the following code. This is useful to prepare your setup before recording your first dataset.
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --control.type=teleoperate
+```
+
+## Record a dataset
+
+Once you're familiar with teleoperation, you can record your first dataset with Moss v1.
+
+If you want to use the Hugging Face hub features for uploading your dataset and you haven't previously done it, make sure you've logged in using a write-access token, which can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens):
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+
+Store your Hugging Face repository name in a variable to run these commands:
+```bash
+HF_USER=$(huggingface-cli whoami | head -n 1)
+echo $HF_USER
+```
+
+Record 2 episodes and upload your dataset to the hub:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/moss_test \
+  --control.tags='["moss","tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=2 \
+  --control.push_to_hub=true
+```
+
+Note: You can resume recording by adding `--control.resume=true`.
+
+## Visualize a dataset
+
+If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
+```bash
+echo ${HF_USER}/moss_test
+```
+
+If you didn't upload with `--control.push_to_hub=false`, you can also visualize it locally with:
+```bash
+python lerobot/scripts/visualize_dataset_html.py \
+  --repo-id ${HF_USER}/moss_test \
+  --local-files-only 1
+```
+
+## Replay an episode
+
+Now try to replay the first episode on your robot:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --control.type=replay \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/moss_test \
+  --control.episode=0
+```
+
+## Train a policy
+
+To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
+```bash
+python lerobot/scripts/train.py \
+  --dataset.repo_id=${HF_USER}/moss_test \
+  --policy.type=act \
+  --output_dir=outputs/train/act_moss_test \
+  --job_name=act_moss_test \
+  --device=cuda \
+  --wandb.enable=true
+```
+
+Let's explain it:
+1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/moss_test`.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `device=cuda` since we are training on a Nvidia GPU, but you could use `device=mps` to train on Apple silicon.
+5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
+
+Training should take several hours. You will find checkpoints in `outputs/train/act_moss_test/checkpoints`.
+
+## Evaluate your policy
+
+You can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=moss \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/eval_act_moss_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=10 \
+  --control.push_to_hub=true \
+  --control.policy.path=outputs/train/act_moss_test/checkpoints/last/pretrained_model
+```
+
+As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
+1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_act_moss_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_moss_test`).
+2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_moss_test`).
+
+## More
+
+Follow this [previous tutorial](https://github.com/huggingface/lerobot/blob/main/examples/7_get_started_with_real_robot.md#4-train-a-policy-on-your-data) for a more in-depth tutorial on controlling real robots with LeRobot.
+
+If you have any question or need help, please reach out on Discord in the channel [`#moss-arm`](https://discord.com/channels/1216765309076115607/1275374638985252925).

examples/1_load_lerobot_dataset.py

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 """
 This script demonstrates the use of `LeRobotDataset` class for handling and processing robotic datasets from Hugging Face.
 It illustrates how to load datasets, manipulate them, and apply transformations suitable for machine learning tasks in PyTorch.
@@ -119,7 +105,7 @@ print(dataset.features[camera_key]["shape"])
 delta_timestamps = {
     # loads 4 images: 1 second before current frame, 500 ms before, 200 ms before, and current frame
     camera_key: [-1, -0.5, -0.20, 0],
-    # loads 6 state vectors: 1.5 seconds before, 1 second before, ... 200 ms, 100 ms, and current frame
+    # loads 8 state vectors: 1.5 seconds before, 1 second before, ... 200 ms, 100 ms, and current frame
     "observation.state": [-1.5, -1, -0.5, -0.20, -0.10, 0],
     # loads 64 action vectors: current frame, 1 frame in the future, 2 frames, ... 63 frames in the future
     "action": [t / dataset.fps for t in range(64)],
@@ -143,6 +129,6 @@ dataloader = torch.utils.data.DataLoader(
 
 for batch in dataloader:
     print(f"{batch[camera_key].shape=}")  # (32, 4, c, h, w)
-    print(f"{batch['observation.state'].shape=}")  # (32, 6, c)
+    print(f"{batch['observation.state'].shape=}")  # (32, 5, c)
     print(f"{batch['action'].shape=}")  # (32, 64, c)
     break

examples/2_evaluate_pretrained_policy.py

@@ -1,24 +1,10 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 """
-This script demonstrates how to evaluate a pretrained policy from the HuggingFace Hub or from your local
+This scripts demonstrates how to evaluate a pretrained policy from the HuggingFace Hub or from your local
 training outputs directory. In the latter case, you might want to run examples/3_train_policy.py first.
 
 It requires the installation of the 'gym_pusht' simulation environment. Install it by running:
 ```bash
-pip install -e ".[pusht]"
+pip install -e ".[pusht]"`
 ```
 """
 
@@ -44,7 +30,7 @@ pretrained_policy_path = "lerobot/diffusion_pusht"
 # OR a path to a local outputs/train folder.
 # pretrained_policy_path = Path("outputs/train/example_pusht_diffusion")
 
-policy = DiffusionPolicy.from_pretrained(pretrained_policy_path)
+policy = DiffusionPolicy.from_pretrained(pretrained_policy_path, map_location=device)
 
 # Initialize evaluation environment to render two observation types:
 # an image of the scene and state/position of the agent. The environment
@@ -119,7 +105,7 @@ while not done:
     rewards.append(reward)
     frames.append(env.render())
 
-    # The rollout is considered done when the success state is reached (i.e. terminated is True),
+    # The rollout is considered done when the success state is reach (i.e. terminated is True),
     # or the maximum number of iterations is reached (i.e. truncated is True)
     done = terminated | truncated | done
     step += 1

examples/3_train_policy.py

@@ -1,18 +1,4 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This script demonstrates how to train Diffusion Policy on the PushT environment.
+"""This scripts demonstrates how to train Diffusion Policy on the PushT environment.
 
 Once you have trained a model with this script, you can try to evaluate it on
 examples/2_evaluate_pretrained_policy.py

examples/4_train_policy_with_script.md

@@ -1,10 +1,10 @@
 This tutorial will explain the training script, how to use it, and particularly how to configure everything needed for the training run.
-> **Note:** The following assumes you're running these commands on a machine equipped with a cuda GPU. If you don't have one (or if you're using a Mac), you can add `--policy.device=cpu` (`--policy.device=mps` respectively). However, be advised that the code executes much slower on cpu.
+> **Note:** The following assume you're running these commands on a machine equipped with a cuda GPU. If you don't have one (or if you're using a Mac), you can add `--device=cpu` (`--device=mps` respectively). However, be advised that the code executes much slower on cpu.
 
 
 ## The training script
 
-LeRobot offers a training script at [`lerobot/scripts/train.py`](../lerobot/scripts/train.py). At a high level it does the following:
+LeRobot offers a training script at [`lerobot/scripts/train.py`](../../lerobot/scripts/train.py). At a high level it does the following:
 
 - Initialize/load a configuration for the following steps using.
 - Instantiates a dataset.
@@ -21,9 +21,9 @@ In the training script, the main function `train` expects a `TrainPipelineConfig
 def train(cfg: TrainPipelineConfig):
 ```
 
-You can inspect the `TrainPipelineConfig` defined in [`lerobot/configs/train.py`](../lerobot/configs/train.py) (which is heavily commented and meant to be a reference to understand any option)
+You can inspect the `TrainPipelineConfig` defined in [`lerobot/configs/train.py`](../../lerobot/configs/train.py) (which is heavily commented and meant to be a reference to understand any option)
 
-When running the script, inputs for the command line are parsed thanks to the `@parser.wrap()` decorator and an instance of this class is automatically generated. Under the hood, this is done with [Draccus](https://github.com/dlwh/draccus) which is a tool dedicated to this purpose. If you're familiar with Hydra, Draccus can similarly load configurations from config files (.json, .yaml) and also override their values through command line inputs. Unlike Hydra, these configurations are pre-defined in the code through dataclasses rather than being defined entirely in config files. This allows for more rigorous serialization/deserialization, typing, and to manipulate configuration as objects directly in the code and not as dictionaries or namespaces (which enables nice features in an IDE such as autocomplete, jump-to-def, etc.)
+When running the script, inputs for the command line are parsed thanks to the `@parser.wrap()` decorator and an instance of this class is automatically generated. Under the hood, this is done with [Draccus](https://github.com/dlwh/draccus) which is a tool dedicated for this purpose. If you're familiar with Hydra, Draccus can similarly load configurations from config files (.json, .yaml) and also override their values through command line inputs. Unlike Hydra, these configurations are pre-defined in the code through dataclasses rather than being defined entirely in config files. This allows for more rigorous serialization/deserialization, typing, and to manipulate configuration as objects directly in the code and not as dictionaries or namespaces (which enables nice features in an IDE such as autocomplete, jump-to-def, etc.)
 
 Let's have a look at a simplified example. Amongst other attributes, the training config has the following attributes:
 ```python
@@ -43,14 +43,14 @@ class DatasetConfig:
 ```
 
 This creates a hierarchical relationship where, for example assuming we have a `cfg` instance of `TrainPipelineConfig`, we can access the `repo_id` value with `cfg.dataset.repo_id`.
-From the command line, we can specify this value by using a very similar syntax `--dataset.repo_id=repo/id`.
+From the command line, we can specify this value with using a very similar syntax `--dataset.repo_id=repo/id`.
 
 By default, every field takes its default value specified in the dataclass. If a field doesn't have a default value, it needs to be specified either from the command line or from a config file – which path is also given in the command line (more in this below). In the example above, the `dataset` field doesn't have a default value which means it must be specified.
 
 
 ## Specifying values from the CLI
 
-Let's say that we want to train [Diffusion Policy](../lerobot/common/policies/diffusion) on the [pusht](https://huggingface.co/datasets/lerobot/pusht) dataset, using the [gym_pusht](https://github.com/huggingface/gym-pusht) environment for evaluation. The command to do so would look like this:
+Let's say that we want to train [Diffusion Policy](../../lerobot/common/policies/diffusion) on the [pusht](https://huggingface.co/datasets/lerobot/pusht) dataset, using the [gym_pusht](https://github.com/huggingface/gym-pusht) environment for evaluation. The command to do so would look like this:
 ```bash
 python lerobot/scripts/train.py \
     --dataset.repo_id=lerobot/pusht \
@@ -60,10 +60,10 @@ python lerobot/scripts/train.py \
 
 Let's break this down:
 - To specify the dataset, we just need to specify its `repo_id` on the hub which is the only required argument in the `DatasetConfig`. The rest of the fields have default values and in this case we are fine with those so we can just add the option `--dataset.repo_id=lerobot/pusht`.
-- To specify the policy, we can just select diffusion policy using `--policy` appended with `.type`. Here, `.type` is a special argument which allows us to select config classes inheriting from `draccus.ChoiceRegistry` and that have been decorated with the `register_subclass()` method. To have a better explanation of this feature, have a look at this [Draccus demo](https://github.com/dlwh/draccus?tab=readme-ov-file#more-flexible-configuration-with-choice-types). In our code, we use this mechanism mainly to select policies, environments, robots, and some other components like optimizers. The policies available to select are located in [lerobot/common/policies](../lerobot/common/policies)
-- Similarly, we select the environment with `--env.type=pusht`. The different environment configs are available in [`lerobot/common/envs/configs.py`](../lerobot/common/envs/configs.py)
+- To specify the policy, we can just select diffusion policy using `--policy` appended with `.type`. Here, `.type` is a special argument which allows us to select config classes inheriting from `draccus.ChoiceRegistry` and that have been decorated with the `register_subclass()` method. To have a better explanation of this feature, have a look at this [Draccus demo](https://github.com/dlwh/draccus?tab=readme-ov-file#more-flexible-configuration-with-choice-types). In our code, we use this mechanism mainly to select policies, environments, robots, and some other components like optimizers. The policies available to select are located in [lerobot/common/policies](../../lerobot/common/policies)
+- Similarly, we select the environment with `--env.type=pusht`. The different environment configs are available in [`lerobot/common/envs/configs.py`](../../lerobot/common/envs/configs.py)
 
-Let's see another example. Let's say you've been training [ACT](../lerobot/common/policies/act) on [lerobot/aloha_sim_insertion_human](https://huggingface.co/datasets/lerobot/aloha_sim_insertion_human) using the [gym-aloha](https://github.com/huggingface/gym-aloha) environment for evaluation with:
+Let's see another example. Let's say you've been training [ACT](../../lerobot/common/policies/act) on [lerobot/aloha_sim_insertion_human](https://huggingface.co/datasets/lerobot/aloha_sim_insertion_human) using the [gym-aloha](https://github.com/huggingface/gym-aloha) environment for evaluation with:
 ```bash
 python lerobot/scripts/train.py \
     --policy.type=act \
@@ -74,7 +74,7 @@ python lerobot/scripts/train.py \
 > Notice we added `--output_dir` to explicitly tell where to write outputs from this run (checkpoints, training state, configs etc.). This is not mandatory and if you don't specify it, a default directory will be created from the current date and time, env.type and policy.type. This will typically look like `outputs/train/2025-01-24/16-10-05_aloha_act`.
 
 We now want to train a different policy for aloha on another task. We'll change the dataset and use [lerobot/aloha_sim_transfer_cube_human](https://huggingface.co/datasets/lerobot/aloha_sim_transfer_cube_human) instead. Of course, we also need to change the task of the environment as well to match this other task.
-Looking at the [`AlohaEnv`](../lerobot/common/envs/configs.py) config, the task is `"AlohaInsertion-v0"` by default, which corresponds to the task we trained on in the command above. The [gym-aloha](https://github.com/huggingface/gym-aloha?tab=readme-ov-file#description) environment also has the `AlohaTransferCube-v0` task which corresponds to this other task we want to train on. Putting this together, we can train this new policy on this different task using:
+Looking at the [`AlohaEnv`](../../lerobot/common/envs/configs.py) config, the task is `"AlohaInsertion-v0"` by default, which corresponds to the task we trained on in the command above. The [gym-aloha](https://github.com/huggingface/gym-aloha?tab=readme-ov-file#description) environment also has the `AlohaTransferCube-v0` task which corresponds to this other task we want to train on. Putting this together, we can train this new policy on this different task using:
 ```bash
 python lerobot/scripts/train.py \
     --policy.type=act \
@@ -135,7 +135,7 @@ will start a training run with the same configuration used for training [lerobot
 
 ## Resume training
 
-Being able to resume a training run is important in case it crashed or aborted for any reason. We'll demonstrate how to do that here.
+Being able to resume a training run is important in case it crashed or aborted for any reason. We'll demonstrate how to that here.
 
 Let's reuse the command from the previous run and add a few more options:
 ```bash

examples/7_get_started_with_real_robot.md

@@ -46,6 +46,13 @@ Using `uv`:
 uv sync --extra "dynamixel"
 ```
 
+/!\ For Linux only, ffmpeg and opencv requires conda install for now. Run this exact sequence of commands:
+```bash
+conda install -c conda-forge ffmpeg
+pip uninstall opencv-python
+conda install -c conda-forge "opencv>=4.10.0"
+```
+
 You are now ready to plug the 5V power supply to the motor bus of the leader arm (the smaller one) since all its motors only require 5V.
 
 Then plug the 12V power supply to the motor bus of the follower arm. It has two motors that need 12V, and the rest will be powered with 5V through the voltage convertor.
@@ -55,9 +62,6 @@ Finally, connect both arms to your computer via USB. Note that the USB doesn't p
 Now you are ready to configure your motors for the first time, as detailed in the sections below. In the upcoming sections, you'll learn about our classes and functions by running some python code in an interactive session, or by copy-pasting it in a python file.
 
 If you have already configured your motors the first time, you can streamline the process by directly running the teleoperate script (which is detailed further in the tutorial):
-
-> **NOTE:** To visualize the data, enable `--control.display_data=true`. This streams the data using `rerun`.
-
 ```bash
 python lerobot/scripts/control_robot.py \
   --robot.type=koch \
@@ -83,7 +87,7 @@ python lerobot/scripts/configure_motor.py \
   --brand dynamixel \
   --model xl330-m288 \
   --baudrate 1000000 \
-  --id 1
+  --ID 1
 ```
 
 Then unplug your first motor and plug the second motor and set its ID to 2.
@@ -93,7 +97,7 @@ python lerobot/scripts/configure_motor.py \
   --brand dynamixel \
   --model xl330-m288 \
   --baudrate 1000000 \
-  --id 2
+  --ID 2
 ```
 
 Redo the process for all your motors until ID 6.
@@ -288,11 +292,6 @@ Steps:
    - Scan for devices. All 12 motors should appear.
    - Select the motors one by one and move the arm. Check that the graphical indicator near the top right shows the movement.
 
-** There is a common issue with the Dynamixel XL430-W250 motors where the motors become undiscoverable after upgrading their firmware from Mac and Windows Dynamixel Wizard2 applications.  When this occurs, it is required to do a firmware recovery (Select `DYNAMIXEL Firmware Recovery` and follow the prompts).   There are two known workarounds to conduct this firmware reset:
-  1) Install the Dynamixel Wizard on a linux machine and complete the firmware recovery
-  2) Use the Dynamixel U2D2 in order to perform the reset with Windows or Mac.  This U2D2 can be purchased [here](https://www.robotis.us/u2d2/).
-  For either solution, open DYNAMIXEL Wizard 2.0 and select the appropriate port. You will likely be unable to see the motor in the GUI at this time. Select `Firmware Recovery`, carefully choose the correct model, and wait for the process to complete. Finally, re-scan to confirm the firmware recovery was successful.
-
 **Read and Write with DynamixelMotorsBus**
 
 To get familiar with how `DynamixelMotorsBus` communicates with the motors, you can start by reading data from them. Copy past this code in the same interactive python session:
@@ -377,7 +376,7 @@ robot = ManipulatorRobot(robot_config)
 
 The `KochRobotConfig` is used to set the associated settings and calibration process. For instance, we activate the torque of the gripper of the leader Koch v1.1 arm and position it at a 40 degree angle to use it as a trigger.
 
-For the [Aloha bimanual robot](https://aloha-2.github.io), we would use `AlohaRobotConfig` to set different settings such as a secondary ID for shadow joints (shoulder, elbow). Specific to Aloha, LeRobot comes with default calibration files stored in `.cache/calibration/aloha_default`. Assuming the motors have been properly assembled, no manual calibration step is expected for Aloha.
+For the [Aloha bimanual robot](https://aloha-2.github.io), we would use `AlohaRobotConfig` to set different settings such as a secondary ID for shadow joints (shoulder, elbow). Specific to Aloha, LeRobot comes with default calibration files stored in in `.cache/calibration/aloha_default`. Assuming the motors have been properly assembled, no manual calibration step is expected for Aloha.
 
 **Calibrate and Connect the ManipulatorRobot**
 
@@ -387,19 +386,19 @@ When you connect your robot for the first time, the [`ManipulatorRobot`](../lero
 
 Here are the positions you'll move the follower arm to:
 
-| 1. Zero position                                                                                                                                                  | 2. Rotated position                                                                                                                                                        | 3. Rest position                                                                                                                                                  |
-| ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
 | <img src="../media/koch/follower_zero.webp?raw=true" alt="Koch v1.1 follower arm zero position" title="Koch v1.1 follower arm zero position" style="width:100%;"> | <img src="../media/koch/follower_rotated.webp?raw=true" alt="Koch v1.1 follower arm rotated position" title="Koch v1.1 follower arm rotated position" style="width:100%;"> | <img src="../media/koch/follower_rest.webp?raw=true" alt="Koch v1.1 follower arm rest position" title="Koch v1.1 follower arm rest position" style="width:100%;"> |
 
 And here are the corresponding positions for the leader arm:
 
-| 1. Zero position                                                                                                                                            | 2. Rotated position                                                                                                                                                  | 3. Rest position                                                                                                                                            |
-| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| 1. Zero position | 2. Rotated position | 3. Rest position |
+|---|---|---|
 | <img src="../media/koch/leader_zero.webp?raw=true" alt="Koch v1.1 leader arm zero position" title="Koch v1.1 leader arm zero position" style="width:100%;"> | <img src="../media/koch/leader_rotated.webp?raw=true" alt="Koch v1.1 leader arm rotated position" title="Koch v1.1 leader arm rotated position" style="width:100%;"> | <img src="../media/koch/leader_rest.webp?raw=true" alt="Koch v1.1 leader arm rest position" title="Koch v1.1 leader arm rest position" style="width:100%;"> |
 
 You can watch a [video tutorial of the calibration procedure](https://youtu.be/8drnU9uRY24) for more details.
 
-During calibration, we count the number of full 360-degree rotations your motors have made since they were first used. That's why we ask you to move to this arbitrary "zero" position. We don't actually "set" the zero position, so you don't need to be accurate. After calculating these "offsets" to shift the motor values around 0, we need to assess the rotation direction of each motor, which might differ. That's why we ask you to rotate all motors to roughly 90 degrees, to measure if the values changed negatively or positively.
+During calibration, we count the number of full 360-degree rotations your motors have made since they were first used. That's why we ask yo to move to this arbitrary "zero" position. We don't actually "set" the zero position, so you don't need to be accurate. After calculating these "offsets" to shift the motor values around 0, we need to assess the rotation direction of each motor, which might differ. That's why we ask you to rotate all motors to roughly 90 degrees, to measure if the values changed negatively or positively.
 
 Finally, the rest position ensures that the follower and leader arms are roughly aligned after calibration, preventing sudden movements that could damage the motors when starting teleoperation.
 
@@ -622,7 +621,7 @@ camera_01_frame_000047.png
 
 Note: Some cameras may take a few seconds to warm up, and the first frame might be black or green.
 
-Finally, run this code to instantiate and connect your camera:
+Finally, run this code to instantiate and connectyour camera:
 ```python
 from lerobot.common.robot_devices.cameras.configs import OpenCVCameraConfig
 from lerobot.common.robot_devices.cameras.opencv import OpenCVCamera
@@ -830,6 +829,16 @@ It contains:
 - `dtRphone:33.84 (29.5hz)` which is the delta time of capturing an image from the phone camera in the thread running asynchronously.
 
 Troubleshooting:
+- On Linux, if you encounter a hanging issue when using cameras, uninstall opencv and re-install it with conda:
+```bash
+pip uninstall opencv-python
+conda install -c conda-forge opencv=4.10.0
+```
+- On Linux, if you encounter any issue during video encoding with `ffmpeg: unknown encoder libsvtav1`, you can:
+  - install with conda-forge by running `conda install -c conda-forge ffmpeg` (it should be compiled with `libsvtav1`),
+  - or, install [Homebrew](https://brew.sh) and run `brew install ffmpeg` (it should be compiled with `libsvtav1`),
+  - or, install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1),
+  - and, make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
 - On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
 
 At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. https://huggingface.co/datasets/cadene/koch_test) that you can obtain by running:
@@ -889,14 +898,14 @@ python lerobot/scripts/train.py \
   --policy.type=act \
   --output_dir=outputs/train/act_koch_test \
   --job_name=act_koch_test \
-  --policy.device=cuda \
+  --device=cuda \
   --wandb.enable=true
 ```
 
 Let's explain it:
 1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/koch_test`.
 2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
-4. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
+4. We provided `device=cuda` since we are training on a Nvidia GPU, but you could use `device=mps` to train on Apple silicon.
 5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
 
 For more information on the `train` script see the previous tutorial: [`examples/4_train_policy_with_script.md`](../examples/4_train_policy_with_script.md)

examples/8_use_stretch.md

@@ -43,19 +43,21 @@ conda create -y -n lerobot python=3.10 && conda activate lerobot
 git clone https://github.com/huggingface/lerobot.git ~/lerobot
 ```
 
-6. When using `miniconda`, install `ffmpeg` in your environment:
-```bash
-conda install ffmpeg -c conda-forge
-```
-
-7. Install LeRobot with stretch dependencies:
+6. Install LeRobot with stretch dependencies:
 ```bash
 cd ~/lerobot && pip install -e ".[stretch]"
 ```
 
 > **Note:** If you get this message, you can ignore it: `ERROR: pip's dependency resolver does not currently take into account all the packages that are installed.`
 
-8. Run a [system check](https://docs.hello-robot.com/0.3/getting_started/stretch_hardware_overview/#system-check) to make sure your robot is ready:
+For Linux only (not Mac), install extra dependencies for recording datasets:
+```bash
+conda install -y -c conda-forge ffmpeg
+pip uninstall -y opencv-python
+conda install -y -c conda-forge "opencv>=4.10.0"
+```
+
+7. Run a [system check](https://docs.hello-robot.com/0.3/getting_started/stretch_hardware_overview/#system-check) to make sure your robot is ready:
 ```bash
 stretch_system_check.py
 ```
@@ -99,11 +101,9 @@ This is equivalent to running `stretch_robot_home.py`
 > **Note:** If you run any of the LeRobot scripts below and Stretch is not properly homed, it will automatically home/calibrate first.
 
 **Teleoperate**
-Before trying teleoperation, you need to activate the gamepad controller by pressing the middle button. For more info, see Stretch's [doc](https://docs.hello-robot.com/0.3/getting_started/hello_robot/#gamepad-teleoperation).
+Before trying teleoperation, you need activate the gamepad controller by pressing the middle button. For more info, see Stretch's [doc](https://docs.hello-robot.com/0.3/getting_started/hello_robot/#gamepad-teleoperation).
 
 Now try out teleoperation (see above documentation to learn about the gamepad controls):
-
-> **NOTE:** To visualize the data, enable `--control.display_data=true`. This streams the data using `rerun`.
 ```bash
 python lerobot/scripts/control_robot.py \
     --robot.type=stretch \

examples/9_use_aloha.md

@@ -30,16 +30,18 @@ conda create -y -n lerobot python=3.10 && conda activate lerobot
 git clone https://github.com/huggingface/lerobot.git ~/lerobot
 ```
 
-5. When using `miniconda`, install `ffmpeg` in your environment:
-```bash
-conda install ffmpeg -c conda-forge
-```
-
-6. Install LeRobot with dependencies for the Aloha motors (dynamixel) and cameras (intelrealsense):
+5. Install LeRobot with dependencies for the Aloha motors (dynamixel) and cameras (intelrealsense):
 ```bash
 cd ~/lerobot && pip install -e ".[dynamixel, intelrealsense]"
 ```
 
+For Linux only (not Mac), install extra dependencies for recording datasets:
+```bash
+conda install -y -c conda-forge ffmpeg
+pip uninstall -y opencv-python
+conda install -y -c conda-forge "opencv>=4.10.0"
+```
+
 ## Teleoperate
 
 **/!\ FOR SAFETY, READ THIS /!\**
@@ -48,9 +50,6 @@ Teleoperation consists in manually operating the leader arms to move the followe
 2. Our code assumes that your robot has been assembled following Trossen Robotics instructions. This allows us to skip calibration, as we use the pre-defined calibration files in `.cache/calibration/aloha_default`. If you replace a motor, make sure you follow the exact instructions from Trossen Robotics.
 
 By running the following code, you can start your first **SAFE** teleoperation:
-
-> **NOTE:** To visualize the data, enable `--control.display_data=true`. This streams the data using `rerun`.
-
 ```bash
 python lerobot/scripts/control_robot.py \
   --robot.type=aloha \
@@ -136,14 +135,14 @@ python lerobot/scripts/train.py \
   --policy.type=act \
   --output_dir=outputs/train/act_aloha_test \
   --job_name=act_aloha_test \
-  --policy.device=cuda \
+  --device=cuda \
   --wandb.enable=true
 ```
 
 Let's explain it:
 1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/aloha_test`.
-2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor states, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
-4. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `device=cuda` since we are training on a Nvidia GPU, but you could use `device=mps` to train on Apple silicon.
 5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
 
 For more information on the `train` script see the previous tutorial: [`examples/4_train_policy_with_script.md`](../examples/4_train_policy_with_script.md)

examples/advanced/1_add_image_transforms.py

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 """
 This script demonstrates how to use torchvision's image transformation with LeRobotDataset for data
 augmentation purposes. The transformations are passed to the dataset as an argument upon creation, and

examples/advanced/2_calculate_validation_loss.py

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 """This script demonstrates how to slice a dataset and calculate the loss on a subset of the data.
 
 This technique can be useful for debugging and testing purposes, as well as identifying whether a policy
@@ -66,7 +52,7 @@ def main():
     print(f"Number of episodes in full dataset: {total_episodes}")
     print(f"Number of episodes in training dataset (90% subset): {len(train_episodes)}")
     print(f"Number of episodes in validation dataset (10% subset): {len(val_episodes)}")
-    # - Load train and val datasets
+    # - Load train an val datasets
     train_dataset = LeRobotDataset(
         "lerobot/pusht", episodes=train_episodes, delta_timestamps=delta_timestamps
     )

examples/port_datasets/pusht_zarr.py

@@ -0,0 +1,229 @@
+import shutil
+from pathlib import Path
+
+import numpy as np
+from huggingface_hub import HfApi
+
+from lerobot.common.constants import HF_LEROBOT_HOME
+from lerobot.common.datasets.lerobot_dataset import CODEBASE_VERSION, LeRobotDataset
+from lerobot.common.datasets.push_dataset_to_hub._download_raw import download_raw
+
+PUSHT_TASK = "Push the T-shaped blue block onto the T-shaped green target surface."
+PUSHT_FEATURES = {
+    "observation.state": {
+        "dtype": "float32",
+        "shape": (2,),
+        "names": {
+            "axes": ["x", "y"],
+        },
+    },
+    "action": {
+        "dtype": "float32",
+        "shape": (2,),
+        "names": {
+            "axes": ["x", "y"],
+        },
+    },
+    "next.reward": {
+        "dtype": "float32",
+        "shape": (1,),
+        "names": None,
+    },
+    "next.success": {
+        "dtype": "bool",
+        "shape": (1,),
+        "names": None,
+    },
+    "observation.environment_state": {
+        "dtype": "float32",
+        "shape": (16,),
+        "names": [
+            "keypoints",
+        ],
+    },
+    "observation.image": {
+        "dtype": None,
+        "shape": (3, 96, 96),
+        "names": [
+            "channels",
+            "height",
+            "width",
+        ],
+    },
+}
+
+
+def build_features(mode: str) -> dict:
+    features = PUSHT_FEATURES
+    if mode == "keypoints":
+        features.pop("observation.image")
+    else:
+        features.pop("observation.environment_state")
+        features["observation.image"]["dtype"] = mode
+
+    return features
+
+
+def load_raw_dataset(zarr_path: Path):
+    try:
+        from lerobot.common.datasets.push_dataset_to_hub._diffusion_policy_replay_buffer import (
+            ReplayBuffer as DiffusionPolicyReplayBuffer,
+        )
+    except ModuleNotFoundError as e:
+        print("`gym_pusht` is not installed. Please install it with `pip install 'lerobot[gym_pusht]'`")
+        raise e
+
+    zarr_data = DiffusionPolicyReplayBuffer.copy_from_path(zarr_path)
+    return zarr_data
+
+
+def calculate_coverage(zarr_data):
+    try:
+        import pymunk
+        from gym_pusht.envs.pusht import PushTEnv, pymunk_to_shapely
+    except ModuleNotFoundError as e:
+        print("`gym_pusht` is not installed. Please install it with `pip install 'lerobot[gym_pusht]'`")
+        raise e
+
+    block_pos = zarr_data["state"][:, 2:4]
+    block_angle = zarr_data["state"][:, 4]
+
+    num_frames = len(block_pos)
+
+    coverage = np.zeros((num_frames,), dtype=np.float32)
+    # 8 keypoints with 2 coords each
+    keypoints = np.zeros((num_frames, 16), dtype=np.float32)
+
+    # Set x, y, theta (in radians)
+    goal_pos_angle = np.array([256, 256, np.pi / 4])
+    goal_body = PushTEnv.get_goal_pose_body(goal_pos_angle)
+
+    for i in range(num_frames):
+        space = pymunk.Space()
+        space.gravity = 0, 0
+        space.damping = 0
+
+        # Add walls.
+        walls = [
+            PushTEnv.add_segment(space, (5, 506), (5, 5), 2),
+            PushTEnv.add_segment(space, (5, 5), (506, 5), 2),
+            PushTEnv.add_segment(space, (506, 5), (506, 506), 2),
+            PushTEnv.add_segment(space, (5, 506), (506, 506), 2),
+        ]
+        space.add(*walls)
+
+        block_body, block_shapes = PushTEnv.add_tee(space, block_pos[i].tolist(), block_angle[i].item())
+        goal_geom = pymunk_to_shapely(goal_body, block_body.shapes)
+        block_geom = pymunk_to_shapely(block_body, block_body.shapes)
+        intersection_area = goal_geom.intersection(block_geom).area
+        goal_area = goal_geom.area
+        coverage[i] = intersection_area / goal_area
+        keypoints[i] = PushTEnv.get_keypoints(block_shapes).flatten()
+
+    return coverage, keypoints
+
+
+def calculate_success(coverage: float, success_threshold: float):
+    return coverage > success_threshold
+
+
+def calculate_reward(coverage: float, success_threshold: float):
+    return np.clip(coverage / success_threshold, 0, 1)
+
+
+def main(raw_dir: Path, repo_id: str, mode: str = "video", push_to_hub: bool = True):
+    if mode not in ["video", "image", "keypoints"]:
+        raise ValueError(mode)
+
+    if (HF_LEROBOT_HOME / repo_id).exists():
+        shutil.rmtree(HF_LEROBOT_HOME / repo_id)
+
+    if not raw_dir.exists():
+        download_raw(raw_dir, repo_id="lerobot-raw/pusht_raw")
+
+    zarr_data = load_raw_dataset(zarr_path=raw_dir / "pusht_cchi_v7_replay.zarr")
+
+    env_state = zarr_data["state"][:]
+    agent_pos = env_state[:, :2]
+
+    action = zarr_data["action"][:]
+    image = zarr_data["img"]  # (b, h, w, c)
+
+    if image.dtype == np.float32 and image.max() == np.float32(255):
+        # HACK: images are loaded as float32 but they actually encode uint8 data
+        image = image.astype(np.uint8)
+
+    episode_data_index = {
+        "from": np.concatenate(([0], zarr_data.meta["episode_ends"][:-1])),
+        "to": zarr_data.meta["episode_ends"],
+    }
+
+    # Calculate success and reward based on the overlapping area
+    # of the T-object and the T-area.
+    coverage, keypoints = calculate_coverage(zarr_data)
+    success = calculate_success(coverage, success_threshold=0.95)
+    reward = calculate_reward(coverage, success_threshold=0.95)
+
+    features = build_features(mode)
+    dataset = LeRobotDataset.create(
+        repo_id=repo_id,
+        fps=10,
+        robot_type="2d pointer",
+        features=features,
+        image_writer_threads=4,
+    )
+    episodes = range(len(episode_data_index["from"]))
+    for ep_idx in episodes:
+        from_idx = episode_data_index["from"][ep_idx]
+        to_idx = episode_data_index["to"][ep_idx]
+        num_frames = to_idx - from_idx
+
+        for frame_idx in range(num_frames):
+            i = from_idx + frame_idx
+            idx = i + (frame_idx < num_frames - 1)
+            frame = {
+                "action": action[i],
+                # Shift reward and success by +1 until the last item of the episode
+                "next.reward": reward[idx : idx + 1],
+                "next.success": success[idx : idx + 1],
+                "task": PUSHT_TASK,
+            }
+
+            frame["observation.state"] = agent_pos[i]
+
+            if mode == "keypoints":
+                frame["observation.environment_state"] = keypoints[i]
+            else:
+                frame["observation.image"] = image[i]
+
+            dataset.add_frame(frame)
+
+        dataset.save_episode()
+
+    if push_to_hub:
+        dataset.push_to_hub()
+        hub_api = HfApi()
+        hub_api.create_tag(repo_id, tag=CODEBASE_VERSION, repo_type="dataset")
+
+
+if __name__ == "__main__":
+    # To try this script, modify the repo id with your own HuggingFace user (e.g cadene/pusht)
+    repo_id = "lerobot/pusht"
+
+    modes = ["video", "image", "keypoints"]
+    # Uncomment if you want to try with a specific mode
+    # modes = ["video"]
+    # modes = ["image"]
+    # modes = ["keypoints"]
+
+    raw_dir = Path("data/lerobot-raw/pusht_raw")
+    for mode in modes:
+        if mode in ["image", "keypoints"]:
+            repo_id += f"_{mode}"
+
+        # download and load raw dataset, create LeRobotDataset, populate it, push to hub
+        main(raw_dir, repo_id=repo_id, mode=mode)
+
+        # Uncomment if you want to load the local dataset and explore it
+        # dataset = LeRobotDataset(repo_id=repo_id)
+        # breakpoint()

examples/robots/lekiwi_client_app.py

@@ -1,94 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import logging
-import time
-
-from lerobot.common.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.common.datasets.utils import hw_to_dataset_features
-from lerobot.common.robots.lekiwi.config_lekiwi import LeKiwiClientConfig
-from lerobot.common.robots.lekiwi.lekiwi_client import LeKiwiClient
-from lerobot.common.teleoperators.keyboard import KeyboardTeleop, KeyboardTeleopConfig
-from lerobot.common.teleoperators.so100_leader import SO100Leader, SO100LeaderConfig
-
-NB_CYCLES_CLIENT_CONNECTION = 250
-
-
-def main():
-    logging.info("Configuring Teleop Devices")
-    leader_arm_config = SO100LeaderConfig(port="/dev/tty.usbmodem58760433331")
-    leader_arm = SO100Leader(leader_arm_config)
-
-    keyboard_config = KeyboardTeleopConfig()
-    keyboard = KeyboardTeleop(keyboard_config)
-
-    logging.info("Configuring LeKiwi Client")
-    robot_config = LeKiwiClientConfig(remote_ip="172.18.134.136", id="lekiwi")
-    robot = LeKiwiClient(robot_config)
-
-    logging.info("Creating LeRobot Dataset")
-
-    action_features = hw_to_dataset_features(robot.action_features, "action")
-    obs_features = hw_to_dataset_features(robot.observation_features, "observation")
-    dataset_features = {**action_features, **obs_features}
-
-    dataset = LeRobotDataset.create(
-        repo_id="user/lekiwi" + str(int(time.time())),
-        fps=10,
-        features=dataset_features,
-        robot_type=robot.name,
-    )
-
-    logging.info("Connecting Teleop Devices")
-    leader_arm.connect()
-    keyboard.connect()
-
-    logging.info("Connecting remote LeKiwi")
-    robot.connect()
-
-    if not robot.is_connected or not leader_arm.is_connected or not keyboard.is_connected:
-        logging.error("Failed to connect to all devices")
-        return
-
-    logging.info("Starting LeKiwi teleoperation")
-    i = 0
-    while i < NB_CYCLES_CLIENT_CONNECTION:
-        arm_action = leader_arm.get_action()
-        base_action = keyboard.get_action()
-        action = {**arm_action, **base_action} if len(base_action) > 0 else arm_action
-
-        action_sent = robot.send_action(action)
-        observation = robot.get_observation()
-
-        frame = {**action_sent, **observation}
-        task = "Dummy Example Task Dataset"
-
-        logging.info("Saved a frame into the dataset")
-        dataset.add_frame(frame, task)
-        i += 1
-
-    logging.info("Disconnecting Teleop Devices and LeKiwi Client")
-    robot.disconnect()
-    leader_arm.disconnect()
-    keyboard.disconnect()
-
-    logging.info("Uploading dataset to the hub")
-    dataset.save_episode()
-    dataset.push_to_hub()
-
-    logging.info("Finished LeKiwi cleanly")
-
-
-if __name__ == "__main__":
-    main()

lerobot/__init__.py

@@ -181,7 +181,7 @@ available_robots = [
     "koch_bimanual",
     "aloha",
     "so100",
-    "so101",
+    "moss",
 ]
 
 # lists all available cameras from `lerobot/common/robot_devices/cameras`

lerobot/calibrate.py

@@ -1,84 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-Helper to recalibrate your device (robot or teleoperator).
-
-Example:
-
-```shell
-python -m lerobot.calibrate \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=blue
-```
-"""
-
-import logging
-from dataclasses import asdict, dataclass
-from pprint import pformat
-
-import draccus
-
-from lerobot.common.cameras.opencv.configuration_opencv import OpenCVCameraConfig  # noqa: F401
-from lerobot.common.cameras.realsense.configuration_realsense import RealSenseCameraConfig  # noqa: F401
-from lerobot.common.robots import (  # noqa: F401
-    Robot,
-    RobotConfig,
-    koch_follower,
-    lekiwi,
-    make_robot_from_config,
-    so100_follower,
-    so100_follower_end_effector,
-)
-from lerobot.common.teleoperators import (  # noqa: F401
-    Teleoperator,
-    TeleoperatorConfig,
-    koch_leader,
-    make_teleoperator_from_config,
-    so100_leader,
-    so101_leader,
-)
-from lerobot.common.utils.utils import init_logging
-
-
-@dataclass
-class CalibrateConfig:
-    teleop: TeleoperatorConfig | None = None
-    robot: RobotConfig | None = None
-
-    def __post_init__(self):
-        if bool(self.teleop) == bool(self.robot):
-            raise ValueError("Choose either a teleop or a robot.")
-
-        self.device = self.robot if self.robot else self.teleop
-
-
-@draccus.wrap()
-def calibrate(cfg: CalibrateConfig):
-    init_logging()
-    logging.info(pformat(asdict(cfg)))
-
-    if isinstance(cfg.device, RobotConfig):
-        device = make_robot_from_config(cfg.device)
-    elif isinstance(cfg.device, TeleoperatorConfig):
-        device = make_teleoperator_from_config(cfg.device)
-
-    device.connect(calibrate=False)
-    device.calibrate()
-    device.disconnect()
-
-
-if __name__ == "__main__":
-    calibrate()

lerobot/common/cameras/__init__.py

@@ -1,17 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from .camera import Camera
-from .configs import CameraConfig, ColorMode, Cv2Rotation
-from .utils import make_cameras_from_configs

lerobot/common/cameras/camera.py

@@ -1,120 +0,0 @@
-#!/usr/bin/env python
-
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import abc
-from typing import Any, Dict, List
-
-import numpy as np
-
-from .configs import CameraConfig, ColorMode
-
-
-class Camera(abc.ABC):
-    """Base class for camera implementations.
-
-    Defines a standard interface for camera operations across different backends.
-    Subclasses must implement all abstract methods.
-
-    Manages basic camera properties (FPS, resolution) and core operations:
-    - Connection/disconnection
-    - Frame capture (sync/async)
-
-    Attributes:
-        fps (int | None): Configured frames per second
-        width (int | None): Frame width in pixels
-        height (int | None): Frame height in pixels
-
-    Example:
-        class MyCamera(Camera):
-            def __init__(self, config): ...
-            @property
-            def is_connected(self) -> bool: ...
-            def connect(self, warmup=True): ...
-            # Plus other required methods
-    """
-
-    def __init__(self, config: CameraConfig):
-        """Initialize the camera with the given configuration.
-
-        Args:
-            config: Camera configuration containing FPS and resolution.
-        """
-        self.fps: int | None = config.fps
-        self.width: int | None = config.width
-        self.height: int | None = config.height
-
-    @property
-    @abc.abstractmethod
-    def is_connected(self) -> bool:
-        """Check if the camera is currently connected.
-
-        Returns:
-            bool: True if the camera is connected and ready to capture frames,
-                  False otherwise.
-        """
-        pass
-
-    @staticmethod
-    @abc.abstractmethod
-    def find_cameras() -> List[Dict[str, Any]]:
-        """Detects available cameras connected to the system.
-        Returns:
-            List[Dict[str, Any]]: A list of dictionaries,
-            where each dictionary contains information about a detected camera.
-        """
-        pass
-
-    @abc.abstractmethod
-    def connect(self, warmup: bool = True) -> None:
-        """Establish connection to the camera.
-
-        Args:
-            warmup: If True (default), captures a warmup frame before returning. Useful
-                   for cameras that require time to adjust capture settings.
-                   If False, skips the warmup frame.
-        """
-        pass
-
-    @abc.abstractmethod
-    def read(self, color_mode: ColorMode | None = None) -> np.ndarray:
-        """Capture and return a single frame from the camera.
-
-        Args:
-            color_mode: Desired color mode for the output frame. If None,
-                        uses the camera's default color mode.
-
-        Returns:
-            np.ndarray: Captured frame as a numpy array.
-        """
-        pass
-
-    @abc.abstractmethod
-    def async_read(self, timeout_ms: float = ...) -> np.ndarray:
-        """Asynchronously capture and return a single frame from the camera.
-
-        Args:
-            timeout_ms: Maximum time to wait for a frame in milliseconds.
-                        Defaults to implementation-specific timeout.
-
-        Returns:
-            np.ndarray: Captured frame as a numpy array.
-        """
-        pass
-
-    @abc.abstractmethod
-    def disconnect(self) -> None:
-        """Disconnect from the camera and release resources."""
-        pass

lerobot/common/cameras/configs.py

@@ -1,44 +0,0 @@
-#!/usr/bin/env python
-
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import abc
-from dataclasses import dataclass
-from enum import Enum
-
-import draccus
-
-
-class ColorMode(str, Enum):
-    RGB = "rgb"
-    BGR = "bgr"
-
-
-class Cv2Rotation(int, Enum):
-    NO_ROTATION = 0
-    ROTATE_90 = 90
-    ROTATE_180 = 180
-    ROTATE_270 = -90
-
-
-@dataclass(kw_only=True)
-class CameraConfig(draccus.ChoiceRegistry, abc.ABC):
-    fps: int | None = None
-    width: int | None = None
-    height: int | None = None
-
-    @property
-    def type(self) -> str:
-        return self.get_choice_name(self.__class__)

lerobot/common/cameras/opencv/__init__.py

@@ -1,16 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from .camera_opencv import OpenCVCamera
-from .configuration_opencv import OpenCVCameraConfig

lerobot/common/cameras/opencv/camera_opencv.py

@@ -1,481 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-Provides the OpenCVCamera class for capturing frames from cameras using OpenCV.
-"""
-
-import logging
-import math
-import platform
-import time
-from pathlib import Path
-from threading import Event, Lock, Thread
-from typing import Any, Dict, List
-
-import cv2
-import numpy as np
-
-from lerobot.common.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
-
-from ..camera import Camera
-from ..utils import get_cv2_backend, get_cv2_rotation
-from .configuration_opencv import ColorMode, OpenCVCameraConfig
-
-# NOTE(Steven): The maximum opencv device index depends on your operating system. For instance,
-# if you have 3 cameras, they should be associated to index 0, 1, and 2. This is the case
-# on MacOS. However, on Ubuntu, the indices are different like 6, 16, 23.
-# When you change the USB port or reboot the computer, the operating system might
-# treat the same cameras as new devices. Thus we select a higher bound to search indices.
-MAX_OPENCV_INDEX = 60
-
-logger = logging.getLogger(__name__)
-
-
-class OpenCVCamera(Camera):
-    """
-    Manages camera interactions using OpenCV for efficient frame recording.
-
-    This class provides a high-level interface to connect to, configure, and read
-    frames from cameras compatible with OpenCV's VideoCapture. It supports both
-    synchronous and asynchronous frame reading.
-
-    An OpenCVCamera instance requires a camera index (e.g., 0) or a device path
-    (e.g., '/dev/video0' on Linux). Camera indices can be unstable across reboots
-    or port changes, especially on Linux. Use the provided utility script to find
-    available camera indices or paths:
-    ```bash
-    python -m lerobot.find_cameras opencv
-    ```
-
-    The camera's default settings (FPS, resolution, color mode) are used unless
-    overridden in the configuration.
-
-    Example:
-        ```python
-        from lerobot.common.cameras.opencv import OpenCVCamera
-        from lerobot.common.cameras.configuration_opencv import OpenCVCameraConfig, ColorMode, Cv2Rotation
-
-        # Basic usage with camera index 0
-        config = OpenCVCameraConfig(index_or_path=0)
-        camera = OpenCVCamera(config)
-        camera.connect()
-
-        # Read 1 frame synchronously
-        color_image = camera.read()
-        print(color_image.shape)
-
-        # Read 1 frame asynchronously
-        async_image = camera.async_read()
-
-        # When done, properly disconnect the camera using
-        camera.disconnect()
-
-        # Example with custom settings
-        custom_config = OpenCVCameraConfig(
-            index_or_path='/dev/video0', # Or use an index
-            fps=30,
-            width=1280,
-            height=720,
-            color_mode=ColorMode.RGB,
-            rotation=Cv2Rotation.ROTATE_90
-        )
-        custom_camera = OpenCVCamera(custom_config)
-        # ... connect, read, disconnect ...
-        ```
-    """
-
-    def __init__(self, config: OpenCVCameraConfig):
-        """
-        Initializes the OpenCVCamera instance.
-
-        Args:
-            config: The configuration settings for the camera.
-        """
-        super().__init__(config)
-
-        self.config = config
-        self.index_or_path = config.index_or_path
-
-        self.fps = config.fps
-        self.color_mode = config.color_mode
-        self.warmup_s = config.warmup_s
-
-        self.videocapture: cv2.VideoCapture | None = None
-
-        self.thread: Thread | None = None
-        self.stop_event: Event | None = None
-        self.frame_lock: Lock = Lock()
-        self.latest_frame: np.ndarray | None = None
-        self.new_frame_event: Event = Event()
-
-        self.rotation: int | None = get_cv2_rotation(config.rotation)
-        self.backend: int = get_cv2_backend()
-
-        if self.height and self.width:
-            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.capture_width, self.capture_height = self.height, self.width
-            else:
-                self.capture_width, self.capture_height = self.width, self.height
-
-    def __str__(self) -> str:
-        return f"{self.__class__.__name__}({self.index_or_path})"
-
-    @property
-    def is_connected(self) -> bool:
-        """Checks if the camera is currently connected and opened."""
-        return isinstance(self.videocapture, cv2.VideoCapture) and self.videocapture.isOpened()
-
-    def connect(self, warmup: bool = True):
-        """
-        Connects to the OpenCV camera specified in the configuration.
-
-        Initializes the OpenCV VideoCapture object, sets desired camera properties
-        (FPS, width, height), and performs initial checks.
-
-        Raises:
-            DeviceAlreadyConnectedError: If the camera is already connected.
-            ConnectionError: If the specified camera index/path is not found or the camera is found but fails to open.
-            RuntimeError: If the camera opens but fails to apply requested FPS/resolution settings.
-        """
-        if self.is_connected:
-            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
-
-        # Use 1 thread for OpenCV operations to avoid potential conflicts or
-        # blocking in multi-threaded applications, especially during data collection.
-        cv2.setNumThreads(1)
-
-        self.videocapture = cv2.VideoCapture(self.index_or_path, self.backend)
-
-        if not self.videocapture.isOpened():
-            self.videocapture.release()
-            self.videocapture = None
-            raise ConnectionError(
-                f"Failed to open {self}."
-                f"Run `python -m lerobot.find_cameras opencv` to find available cameras."
-            )
-
-        self._configure_capture_settings()
-
-        if warmup:
-            start_time = time.time()
-            while time.time() - start_time < self.warmup_s:
-                self.read()
-                time.sleep(0.1)
-
-        logger.info(f"{self} connected.")
-
-    def _configure_capture_settings(self) -> None:
-        """
-        Applies the specified FPS, width, and height settings to the connected camera.
-
-        This method attempts to set the camera properties via OpenCV. It checks if
-        the camera successfully applied the settings and raises an error if not.
-
-        Args:
-            fps: The desired frames per second. If None, the setting is skipped.
-            width: The desired capture width. If None, the setting is skipped.
-            height: The desired capture height. If None, the setting is skipped.
-
-        Raises:
-            RuntimeError: If the camera fails to set any of the specified properties
-                          to the requested value.
-            DeviceNotConnectedError: If the camera is not connected when attempting
-                                     to configure settings.
-        """
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"Cannot configure settings for {self} as it is not connected.")
-
-        if self.fps is None:
-            self.fps = self.videocapture.get(cv2.CAP_PROP_FPS)
-        else:
-            self._validate_fps()
-
-        default_width = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_WIDTH)))
-        default_height = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_HEIGHT)))
-
-        if self.width is None or self.height is None:
-            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.width, self.height = default_height, default_width
-                self.capture_width, self.capture_height = default_width, default_height
-            else:
-                self.width, self.height = default_width, default_height
-                self.capture_width, self.capture_height = default_width, default_height
-        else:
-            self._validate_width_and_height()
-
-    def _validate_fps(self) -> None:
-        """Validates and sets the camera's frames per second (FPS)."""
-
-        success = self.videocapture.set(cv2.CAP_PROP_FPS, float(self.fps))
-        actual_fps = self.videocapture.get(cv2.CAP_PROP_FPS)
-        # Use math.isclose for robust float comparison
-        if not success or not math.isclose(self.fps, actual_fps, rel_tol=1e-3):
-            raise RuntimeError(f"{self} failed to set fps={self.fps} ({actual_fps=}).")
-
-    def _validate_width_and_height(self) -> None:
-        """Validates and sets the camera's frame capture width and height."""
-
-        success = self.videocapture.set(cv2.CAP_PROP_FRAME_WIDTH, float(self.capture_width))
-        actual_width = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_WIDTH)))
-        if not success or self.capture_width != actual_width:
-            raise RuntimeError(f"{self} failed to set capture_width={self.capture_width} ({actual_width=}).")
-
-        success = self.videocapture.set(cv2.CAP_PROP_FRAME_HEIGHT, float(self.capture_height))
-        actual_height = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_HEIGHT)))
-        if not success or self.capture_height != actual_height:
-            raise RuntimeError(
-                f"{self} failed to set capture_height={self.capture_height} ({actual_height})."
-            )
-
-    @staticmethod
-    def find_cameras() -> List[Dict[str, Any]]:
-        """
-        Detects available OpenCV cameras connected to the system.
-
-        On Linux, it scans '/dev/video*' paths. On other systems (like macOS, Windows),
-        it checks indices from 0 up to `MAX_OPENCV_INDEX`.
-
-        Returns:
-            List[Dict[str, Any]]: A list of dictionaries,
-            where each dictionary contains 'type', 'id' (port index or path),
-            and the default profile properties (width, height, fps, format).
-        """
-        found_cameras_info = []
-
-        if platform.system() == "Linux":
-            possible_paths = sorted(Path("/dev").glob("video*"), key=lambda p: p.name)
-            targets_to_scan = [str(p) for p in possible_paths]
-        else:
-            targets_to_scan = list(range(MAX_OPENCV_INDEX))
-
-        for target in targets_to_scan:
-            camera = cv2.VideoCapture(target)
-            if camera.isOpened():
-                default_width = int(camera.get(cv2.CAP_PROP_FRAME_WIDTH))
-                default_height = int(camera.get(cv2.CAP_PROP_FRAME_HEIGHT))
-                default_fps = camera.get(cv2.CAP_PROP_FPS)
-                default_format = camera.get(cv2.CAP_PROP_FORMAT)
-                camera_info = {
-                    "name": f"OpenCV Camera @ {target}",
-                    "type": "OpenCV",
-                    "id": target,
-                    "backend_api": camera.getBackendName(),
-                    "default_stream_profile": {
-                        "format": default_format,
-                        "width": default_width,
-                        "height": default_height,
-                        "fps": default_fps,
-                    },
-                }
-
-                found_cameras_info.append(camera_info)
-                camera.release()
-
-        return found_cameras_info
-
-    def read(self, color_mode: ColorMode | None = None) -> np.ndarray:
-        """
-        Reads a single frame synchronously from the camera.
-
-        This is a blocking call. It waits for the next available frame from the
-        camera hardware via OpenCV.
-
-        Args:
-            color_mode (Optional[ColorMode]): If specified, overrides the default
-                color mode (`self.color_mode`) for this read operation (e.g.,
-                request RGB even if default is BGR).
-
-        Returns:
-            np.ndarray: The captured frame as a NumPy array in the format
-                       (height, width, channels), using the specified or default
-                       color mode and applying any configured rotation.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is not connected.
-            RuntimeError: If reading the frame from the camera fails or if the
-                          received frame dimensions don't match expectations before rotation.
-            ValueError: If an invalid `color_mode` is requested.
-        """
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"{self} is not connected.")
-
-        start_time = time.perf_counter()
-
-        ret, frame = self.videocapture.read()
-
-        if not ret or frame is None:
-            raise RuntimeError(f"{self} read failed (status={ret}).")
-
-        processed_frame = self._postprocess_image(frame, color_mode)
-
-        read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
-
-        return processed_frame
-
-    def _postprocess_image(self, image: np.ndarray, color_mode: ColorMode | None = None) -> np.ndarray:
-        """
-        Applies color conversion, dimension validation, and rotation to a raw frame.
-
-        Args:
-            image (np.ndarray): The raw image frame (expected BGR format from OpenCV).
-            color_mode (Optional[ColorMode]): The target color mode (RGB or BGR). If None,
-                                             uses the instance's default `self.color_mode`.
-
-        Returns:
-            np.ndarray: The processed image frame.
-
-        Raises:
-            ValueError: If the requested `color_mode` is invalid.
-            RuntimeError: If the raw frame dimensions do not match the configured
-                          `width` and `height`.
-        """
-        requested_color_mode = self.color_mode if color_mode is None else color_mode
-
-        if requested_color_mode not in (ColorMode.RGB, ColorMode.BGR):
-            raise ValueError(
-                f"Invalid color mode '{requested_color_mode}'. Expected {ColorMode.RGB} or {ColorMode.BGR}."
-            )
-
-        h, w, c = image.shape
-
-        if h != self.capture_height or w != self.capture_width:
-            raise RuntimeError(
-                f"{self} frame width={w} or height={h} do not match configured width={self.capture_width} or height={self.capture_height}."
-            )
-
-        if c != 3:
-            raise RuntimeError(f"{self} frame channels={c} do not match expected 3 channels (RGB/BGR).")
-
-        processed_image = image
-        if requested_color_mode == ColorMode.RGB:
-            processed_image = cv2.cvtColor(image, cv2.COLOR_BGR2RGB)
-
-        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-            processed_image = cv2.rotate(processed_image, self.rotation)
-
-        return processed_image
-
-    def _read_loop(self):
-        """
-        Internal loop run by the background thread for asynchronous reading.
-
-        On each iteration:
-        1. Reads a color frame
-        2. Stores result in latest_frame (thread-safe)
-        3. Sets new_frame_event to notify listeners
-
-        Stops on DeviceNotConnectedError, logs other errors and continues.
-        """
-        while not self.stop_event.is_set():
-            try:
-                color_image = self.read()
-
-                with self.frame_lock:
-                    self.latest_frame = color_image
-                self.new_frame_event.set()
-
-            except DeviceNotConnectedError:
-                break
-            except Exception as e:
-                logger.warning(f"Error reading frame in background thread for {self}: {e}")
-
-    def _start_read_thread(self) -> None:
-        """Starts or restarts the background read thread if it's not running."""
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=0.1)
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        self.stop_event = Event()
-        self.thread = Thread(target=self._read_loop, args=(), name=f"{self}_read_loop")
-        self.thread.daemon = True
-        self.thread.start()
-
-    def _stop_read_thread(self) -> None:
-        """Signals the background read thread to stop and waits for it to join."""
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=2.0)
-
-        self.thread = None
-        self.stop_event = None
-
-    def async_read(self, timeout_ms: float = 200) -> np.ndarray:
-        """
-        Reads the latest available frame asynchronously.
-
-        This method retrieves the most recent frame captured by the background
-        read thread. It does not block waiting for the camera hardware directly,
-        but may wait up to timeout_ms for the background thread to provide a frame.
-
-        Args:
-            timeout_ms (float): Maximum time in milliseconds to wait for a frame
-                to become available. Defaults to 200ms (0.2 seconds).
-
-        Returns:
-            np.ndarray: The latest captured frame as a NumPy array in the format
-                       (height, width, channels), processed according to configuration.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is not connected.
-            TimeoutError: If no frame becomes available within the specified timeout.
-            RuntimeError: If an unexpected error occurs.
-        """
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"{self} is not connected.")
-
-        if self.thread is None or not self.thread.is_alive():
-            self._start_read_thread()
-
-        if not self.new_frame_event.wait(timeout=timeout_ms / 1000.0):
-            thread_alive = self.thread is not None and self.thread.is_alive()
-            raise TimeoutError(
-                f"Timed out waiting for frame from camera {self} after {timeout_ms} ms. "
-                f"Read thread alive: {thread_alive}."
-            )
-
-        with self.frame_lock:
-            frame = self.latest_frame
-            self.new_frame_event.clear()
-
-        if frame is None:
-            raise RuntimeError(f"Internal error: Event set but no frame available for {self}.")
-
-        return frame
-
-    def disconnect(self):
-        """
-        Disconnects from the camera and cleans up resources.
-
-        Stops the background read thread (if running) and releases the OpenCV
-        VideoCapture object.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is already disconnected.
-        """
-        if not self.is_connected and self.thread is None:
-            raise DeviceNotConnectedError(f"{self} not connected.")
-
-        if self.thread is not None:
-            self._stop_read_thread()
-
-        if self.videocapture is not None:
-            self.videocapture.release()
-            self.videocapture = None
-
-        logger.info(f"{self} disconnected.")

lerobot/common/cameras/opencv/configuration_opencv.py

@@ -1,73 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from dataclasses import dataclass
-from pathlib import Path
-
-from ..configs import CameraConfig, ColorMode, Cv2Rotation
-
-
-@CameraConfig.register_subclass("opencv")
-@dataclass
-class OpenCVCameraConfig(CameraConfig):
-    """Configuration class for OpenCV-based camera devices or video files.
-
-    This class provides configuration options for cameras accessed through OpenCV,
-    supporting both physical camera devices and video files. It includes settings
-    for resolution, frame rate, color mode, and image rotation.
-
-    Example configurations:
-    ```python
-    # Basic configurations
-    OpenCVCameraConfig(0, 30, 1280, 720)   # 1280x720 @ 30FPS
-    OpenCVCameraConfig(/dev/video4, 60, 640, 480)   # 640x480 @ 60FPS
-
-    # Advanced configurations
-    OpenCVCameraConfig(128422271347, 30, 640, 480, rotation=Cv2Rotation.ROTATE_90)     # With 90° rotation
-    ```
-
-    Attributes:
-        index_or_path: Either an integer representing the camera device index,
-                      or a Path object pointing to a video file.
-        fps: Requested frames per second for the color stream.
-        width: Requested frame width in pixels for the color stream.
-        height: Requested frame height in pixels for the color stream.
-        color_mode: Color mode for image output (RGB or BGR). Defaults to RGB.
-        rotation: Image rotation setting (0°, 90°, 180°, or 270°). Defaults to no rotation.
-        warmup_s: Time reading frames before returning from connect (in seconds)
-
-    Note:
-        - Only 3-channel color output (RGB/BGR) is currently supported.
-    """
-
-    index_or_path: int | Path
-    color_mode: ColorMode = ColorMode.RGB
-    rotation: Cv2Rotation = Cv2Rotation.NO_ROTATION
-    warmup_s: int = 1
-
-    def __post_init__(self):
-        if self.color_mode not in (ColorMode.RGB, ColorMode.BGR):
-            raise ValueError(
-                f"`color_mode` is expected to be {ColorMode.RGB.value} or {ColorMode.BGR.value}, but {self.color_mode} is provided."
-            )
-
-        if self.rotation not in (
-            Cv2Rotation.NO_ROTATION,
-            Cv2Rotation.ROTATE_90,
-            Cv2Rotation.ROTATE_180,
-            Cv2Rotation.ROTATE_270,
-        ):
-            raise ValueError(
-                f"`rotation` is expected to be in {(Cv2Rotation.NO_ROTATION, Cv2Rotation.ROTATE_90, Cv2Rotation.ROTATE_180, Cv2Rotation.ROTATE_270)}, but {self.rotation} is provided."
-            )

lerobot/common/cameras/realsense/__init__.py

@@ -1,16 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from .camera_realsense import RealSenseCamera
-from .configuration_realsense import RealSenseCameraConfig

lerobot/common/cameras/realsense/camera_realsense.py

@@ -1,557 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-Provides the RealSenseCamera class for capturing frames from Intel RealSense cameras.
-"""
-
-import logging
-import time
-from threading import Event, Lock, Thread
-from typing import Any, Dict, List
-
-import cv2
-import numpy as np
-
-try:
-    import pyrealsense2 as rs
-except Exception as e:
-    logging.info(f"Could not import realsense: {e}")
-
-from lerobot.common.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
-
-from ..camera import Camera
-from ..configs import ColorMode
-from ..utils import get_cv2_rotation
-from .configuration_realsense import RealSenseCameraConfig
-
-logger = logging.getLogger(__name__)
-
-
-class RealSenseCamera(Camera):
-    """
-    Manages interactions with Intel RealSense cameras for frame and depth recording.
-
-    This class provides an interface similar to `OpenCVCamera` but tailored for
-    RealSense devices, leveraging the `pyrealsense2` library. It uses the camera's
-    unique serial number for identification, offering more stability than device
-    indices, especially on Linux. It also supports capturing depth maps alongside
-    color frames.
-
-    Use the provided utility script to find available camera indices and default profiles:
-    ```bash
-    python -m lerobot.find_cameras realsense
-    ```
-
-    A `RealSenseCamera` instance requires a configuration object specifying the
-    camera's serial number or a unique device name. If using the name, ensure only
-    one camera with that name is connected.
-
-    The camera's default settings (FPS, resolution, color mode) from the stream
-    profile are used unless overridden in the configuration.
-
-    Example:
-        ```python
-        from lerobot.common.cameras.realsense import RealSenseCamera, RealSenseCameraConfig
-        from lerobot.common.cameras import ColorMode, Cv2Rotation
-
-        # Basic usage with serial number
-        config = RealSenseCameraConfig(serial_number_or_name="0123456789") # Replace with actual SN
-        camera = RealSenseCamera(config)
-        camera.connect()
-
-        # Read 1 frame synchronously
-        color_image = camera.read()
-        print(color_image.shape)
-
-        # Read 1 frame asynchronously
-        async_image = camera.async_read()
-
-        # When done, properly disconnect the camera using
-        camera.disconnect()
-
-        # Example with depth capture and custom settings
-        custom_config = RealSenseCameraConfig(
-            serial_number_or_name="0123456789", # Replace with actual SN
-            fps=30,
-            width=1280,
-            height=720,
-            color_mode=ColorMode.BGR, # Request BGR output
-            rotation=Cv2Rotation.NO_ROTATION,
-            use_depth=True
-        )
-        depth_camera = RealSenseCamera(custom_config)
-        depth_camera.connect()
-
-        # Read 1 depth frame
-        depth_map = depth_camera.read_depth()
-
-        # Example using a unique camera name
-        name_config = RealSenseCameraConfig(serial_number_or_name="Intel RealSense D435") # If unique
-        name_camera = RealSenseCamera(name_config)
-        # ... connect, read, disconnect ...
-        ```
-    """
-
-    def __init__(self, config: RealSenseCameraConfig):
-        """
-        Initializes the RealSenseCamera instance.
-
-        Args:
-            config: The configuration settings for the camera.
-        """
-
-        super().__init__(config)
-
-        self.config = config
-
-        if config.serial_number_or_name.isdigit():
-            self.serial_number = config.serial_number_or_name
-        else:
-            self.serial_number = self._find_serial_number_from_name(config.serial_number_or_name)
-
-        self.fps = config.fps
-        self.color_mode = config.color_mode
-        self.use_depth = config.use_depth
-        self.warmup_s = config.warmup_s
-
-        self.rs_pipeline: rs.pipeline | None = None
-        self.rs_profile: rs.pipeline_profile | None = None
-
-        self.thread: Thread | None = None
-        self.stop_event: Event | None = None
-        self.frame_lock: Lock = Lock()
-        self.latest_frame: np.ndarray | None = None
-        self.new_frame_event: Event = Event()
-
-        self.rotation: int | None = get_cv2_rotation(config.rotation)
-
-        if self.height and self.width:
-            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.capture_width, self.capture_height = self.height, self.width
-            else:
-                self.capture_width, self.capture_height = self.width, self.height
-
-    def __str__(self) -> str:
-        return f"{self.__class__.__name__}({self.serial_number})"
-
-    @property
-    def is_connected(self) -> bool:
-        """Checks if the camera pipeline is started and streams are active."""
-        return self.rs_pipeline is not None and self.rs_profile is not None
-
-    def connect(self, warmup: bool = True):
-        """
-        Connects to the RealSense camera specified in the configuration.
-
-        Initializes the RealSense pipeline, configures the required streams (color
-        and optionally depth), starts the pipeline, and validates the actual stream settings.
-
-        Raises:
-            DeviceAlreadyConnectedError: If the camera is already connected.
-            ValueError: If the configuration is invalid (e.g., missing serial/name, name not unique).
-            ConnectionError: If the camera is found but fails to start the pipeline or no RealSense devices are detected at all.
-            RuntimeError: If the pipeline starts but fails to apply requested settings.
-        """
-        if self.is_connected:
-            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
-
-        self.rs_pipeline = rs.pipeline()
-        rs_config = rs.config()
-        self._configure_rs_pipeline_config(rs_config)
-
-        try:
-            self.rs_profile = self.rs_pipeline.start(rs_config)
-        except RuntimeError as e:
-            self.rs_profile = None
-            self.rs_pipeline = None
-            raise ConnectionError(
-                f"Failed to open {self}."
-                "Run `python -m lerobot.find_cameras realsense` to find available cameras."
-            ) from e
-
-        self._configure_capture_settings()
-
-        if warmup:
-            time.sleep(
-                1
-            )  # NOTE(Steven): RS cameras need a bit of time to warm up before the first read. If we don't wait, the first read from the warmup will raise.
-            start_time = time.time()
-            while time.time() - start_time < self.warmup_s:
-                self.read()
-                time.sleep(0.1)
-
-        logger.info(f"{self} connected.")
-
-    @staticmethod
-    def find_cameras() -> List[Dict[str, Any]]:
-        """
-        Detects available Intel RealSense cameras connected to the system.
-
-        Returns:
-            List[Dict[str, Any]]: A list of dictionaries,
-            where each dictionary contains 'type', 'id' (serial number), 'name',
-            firmware version, USB type, and other available specs, and the default profile properties (width, height, fps, format).
-
-        Raises:
-            OSError: If pyrealsense2 is not installed.
-            ImportError: If pyrealsense2 is not installed.
-        """
-        found_cameras_info = []
-        context = rs.context()
-        devices = context.query_devices()
-
-        for device in devices:
-            camera_info = {
-                "name": device.get_info(rs.camera_info.name),
-                "type": "RealSense",
-                "id": device.get_info(rs.camera_info.serial_number),
-                "firmware_version": device.get_info(rs.camera_info.firmware_version),
-                "usb_type_descriptor": device.get_info(rs.camera_info.usb_type_descriptor),
-                "physical_port": device.get_info(rs.camera_info.physical_port),
-                "product_id": device.get_info(rs.camera_info.product_id),
-                "product_line": device.get_info(rs.camera_info.product_line),
-            }
-
-            # Get stream profiles for each sensor
-            sensors = device.query_sensors()
-            for sensor in sensors:
-                profiles = sensor.get_stream_profiles()
-
-                for profile in profiles:
-                    if profile.is_video_stream_profile() and profile.is_default():
-                        vprofile = profile.as_video_stream_profile()
-                        stream_info = {
-                            "stream_type": vprofile.stream_name(),
-                            "format": vprofile.format().name,
-                            "width": vprofile.width(),
-                            "height": vprofile.height(),
-                            "fps": vprofile.fps(),
-                        }
-                        camera_info["default_stream_profile"] = stream_info
-
-            found_cameras_info.append(camera_info)
-
-        return found_cameras_info
-
-    def _find_serial_number_from_name(self, name: str) -> str:
-        """Finds the serial number for a given unique camera name."""
-        camera_infos = self.find_cameras()
-        found_devices = [cam for cam in camera_infos if str(cam["name"]) == name]
-
-        if not found_devices:
-            available_names = [cam["name"] for cam in camera_infos]
-            raise ValueError(
-                f"No RealSense camera found with name '{name}'. Available camera names: {available_names}"
-            )
-
-        if len(found_devices) > 1:
-            serial_numbers = [dev["serial_number"] for dev in found_devices]
-            raise ValueError(
-                f"Multiple RealSense cameras found with name '{name}'. "
-                f"Please use a unique serial number instead. Found SNs: {serial_numbers}"
-            )
-
-        serial_number = str(found_devices[0]["serial_number"])
-        return serial_number
-
-    def _configure_rs_pipeline_config(self, rs_config):
-        """Creates and configures the RealSense pipeline configuration object."""
-        rs.config.enable_device(rs_config, self.serial_number)
-
-        if self.width and self.height and self.fps:
-            rs_config.enable_stream(
-                rs.stream.color, self.capture_width, self.capture_height, rs.format.rgb8, self.fps
-            )
-            if self.use_depth:
-                rs_config.enable_stream(
-                    rs.stream.depth, self.capture_width, self.capture_height, rs.format.z16, self.fps
-                )
-        else:
-            rs_config.enable_stream(rs.stream.color)
-            if self.use_depth:
-                rs_config.enable_stream(rs.stream.depth)
-
-    def _configure_capture_settings(self) -> None:
-        """Sets fps, width, and height from device stream if not already configured.
-
-        Uses the color stream profile to update unset attributes. Handles rotation by
-        swapping width/height when needed. Original capture dimensions are always stored.
-
-        Raises:
-            DeviceNotConnectedError: If device is not connected.
-        """
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"Cannot validate settings for {self} as it is not connected.")
-
-        stream = self.rs_profile.get_stream(rs.stream.color).as_video_stream_profile()
-
-        if self.fps is None:
-            self.fps = stream.fps()
-
-        if self.width is None or self.height is None:
-            actual_width = int(round(stream.width()))
-            actual_height = int(round(stream.height()))
-            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.width, self.height = actual_height, actual_width
-                self.capture_width, self.capture_height = actual_width, actual_height
-            else:
-                self.width, self.height = actual_width, actual_height
-                self.capture_width, self.capture_height = actual_width, actual_height
-
-    def read_depth(self, timeout_ms: int = 200) -> np.ndarray:
-        """
-        Reads a single frame (depth) synchronously from the camera.
-
-        This is a blocking call. It waits for a coherent set of frames (depth)
-        from the camera hardware via the RealSense pipeline.
-
-        Args:
-            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 200ms.
-
-        Returns:
-            np.ndarray: The depth map as a NumPy array (height, width)
-                  of type `np.uint16` (raw depth values in millimeters) and rotation.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is not connected.
-            RuntimeError: If reading frames from the pipeline fails or frames are invalid.
-        """
-
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"{self} is not connected.")
-        if not self.use_depth:
-            raise RuntimeError(
-                f"Failed to capture depth frame '.read_depth()'. Depth stream is not enabled for {self}."
-            )
-
-        start_time = time.perf_counter()
-
-        ret, frame = self.rs_pipeline.try_wait_for_frames(timeout_ms=timeout_ms)
-
-        if not ret or frame is None:
-            raise RuntimeError(f"{self} read_depth failed (status={ret}).")
-
-        depth_frame = frame.get_depth_frame()
-        depth_map = np.asanyarray(depth_frame.get_data())
-
-        depth_map_processed = self._postprocess_image(depth_map, depth_frame=True)
-
-        read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
-
-        return depth_map_processed
-
-    def read(self, color_mode: ColorMode | None = None, timeout_ms: int = 200) -> np.ndarray:
-        """
-        Reads a single frame (color) synchronously from the camera.
-
-        This is a blocking call. It waits for a coherent set of frames (color)
-        from the camera hardware via the RealSense pipeline.
-
-        Args:
-            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 200ms.
-
-        Returns:
-            np.ndarray: The captured color frame as a NumPy array
-              (height, width, channels), processed according to `color_mode` and rotation.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is not connected.
-            RuntimeError: If reading frames from the pipeline fails or frames are invalid.
-            ValueError: If an invalid `color_mode` is requested.
-        """
-
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"{self} is not connected.")
-
-        start_time = time.perf_counter()
-
-        ret, frame = self.rs_pipeline.try_wait_for_frames(timeout_ms=timeout_ms)
-
-        if not ret or frame is None:
-            raise RuntimeError(f"{self} read failed (status={ret}).")
-
-        color_frame = frame.get_color_frame()
-        color_image_raw = np.asanyarray(color_frame.get_data())
-
-        color_image_processed = self._postprocess_image(color_image_raw, color_mode)
-
-        read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
-
-        return color_image_processed
-
-    def _postprocess_image(
-        self, image: np.ndarray, color_mode: ColorMode | None = None, depth_frame: bool = False
-    ) -> np.ndarray:
-        """
-        Applies color conversion, dimension validation, and rotation to a raw color frame.
-
-        Args:
-            image (np.ndarray): The raw image frame (expected RGB format from RealSense).
-            color_mode (Optional[ColorMode]): The target color mode (RGB or BGR). If None,
-                                             uses the instance's default `self.color_mode`.
-
-        Returns:
-            np.ndarray: The processed image frame according to `self.color_mode` and `self.rotation`.
-
-        Raises:
-            ValueError: If the requested `color_mode` is invalid.
-            RuntimeError: If the raw frame dimensions do not match the configured
-                          `width` and `height`.
-        """
-
-        if color_mode and color_mode not in (ColorMode.RGB, ColorMode.BGR):
-            raise ValueError(
-                f"Invalid requested color mode '{color_mode}'. Expected {ColorMode.RGB} or {ColorMode.BGR}."
-            )
-
-        if depth_frame:
-            h, w = image.shape
-        else:
-            h, w, c = image.shape
-
-            if c != 3:
-                raise RuntimeError(f"{self} frame channels={c} do not match expected 3 channels (RGB/BGR).")
-
-        if h != self.capture_height or w != self.capture_width:
-            raise RuntimeError(
-                f"{self} frame width={w} or height={h} do not match configured width={self.capture_width} or height={self.capture_height}."
-            )
-
-        processed_image = image
-        if self.color_mode == ColorMode.BGR:
-            processed_image = cv2.cvtColor(image, cv2.COLOR_RGB2BGR)
-
-        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-            processed_image = cv2.rotate(processed_image, self.rotation)
-
-        return processed_image
-
-    def _read_loop(self):
-        """
-        Internal loop run by the background thread for asynchronous reading.
-
-        On each iteration:
-        1. Reads a color frame with 500ms timeout
-        2. Stores result in latest_frame (thread-safe)
-        3. Sets new_frame_event to notify listeners
-
-        Stops on DeviceNotConnectedError, logs other errors and continues.
-        """
-        while not self.stop_event.is_set():
-            try:
-                color_image = self.read(timeout_ms=500)
-
-                with self.frame_lock:
-                    self.latest_frame = color_image
-                self.new_frame_event.set()
-
-            except DeviceNotConnectedError:
-                break
-            except Exception as e:
-                logger.warning(f"Error reading frame in background thread for {self}: {e}")
-
-    def _start_read_thread(self) -> None:
-        """Starts or restarts the background read thread if it's not running."""
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=0.1)
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        self.stop_event = Event()
-        self.thread = Thread(target=self._read_loop, args=(), name=f"{self}_read_loop")
-        self.thread.daemon = True
-        self.thread.start()
-
-    def _stop_read_thread(self):
-        """Signals the background read thread to stop and waits for it to join."""
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=2.0)
-
-        self.thread = None
-        self.stop_event = None
-
-    # NOTE(Steven): Missing implementation for depth for now
-    def async_read(self, timeout_ms: float = 200) -> np.ndarray:
-        """
-        Reads the latest available frame data (color) asynchronously.
-
-        This method retrieves the most recent color frame captured by the background
-        read thread. It does not block waiting for the camera hardware directly,
-        but may wait up to timeout_ms for the background thread to provide a frame.
-
-        Args:
-            timeout_ms (float): Maximum time in milliseconds to wait for a frame
-                to become available. Defaults to 200ms (0.2 seconds).
-
-        Returns:
-            np.ndarray:
-            The latest captured frame data (color image), processed according to configuration.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is not connected.
-            TimeoutError: If no frame data becomes available within the specified timeout.
-            RuntimeError: If the background thread died unexpectedly or another error occurs.
-        """
-        if not self.is_connected:
-            raise DeviceNotConnectedError(f"{self} is not connected.")
-
-        if self.thread is None or not self.thread.is_alive():
-            self._start_read_thread()
-
-        if not self.new_frame_event.wait(timeout=timeout_ms / 1000.0):
-            thread_alive = self.thread is not None and self.thread.is_alive()
-            raise TimeoutError(
-                f"Timed out waiting for frame from camera {self} after {timeout_ms} ms. "
-                f"Read thread alive: {thread_alive}."
-            )
-
-        with self.frame_lock:
-            frame = self.latest_frame
-            self.new_frame_event.clear()
-
-        if frame is None:
-            raise RuntimeError(f"Internal error: Event set but no frame available for {self}.")
-
-        return frame
-
-    def disconnect(self):
-        """
-        Disconnects from the camera, stops the pipeline, and cleans up resources.
-
-        Stops the background read thread (if running) and stops the RealSense pipeline.
-
-        Raises:
-            DeviceNotConnectedError: If the camera is already disconnected (pipeline not running).
-        """
-
-        if not self.is_connected and self.thread is None:
-            raise DeviceNotConnectedError(
-                f"Attempted to disconnect {self}, but it appears already disconnected."
-            )
-
-        if self.thread is not None:
-            self._stop_read_thread()
-
-        if self.rs_pipeline is not None:
-            self.rs_pipeline.stop()
-            self.rs_pipeline = None
-            self.rs_profile = None
-
-        logger.info(f"{self} disconnected.")

lerobot/common/cameras/realsense/configuration_realsense.py

@@ -1,82 +0,0 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from dataclasses import dataclass
-
-from ..configs import CameraConfig, ColorMode, Cv2Rotation
-
-
-@CameraConfig.register_subclass("intelrealsense")
-@dataclass
-class RealSenseCameraConfig(CameraConfig):
-    """Configuration class for Intel RealSense cameras.
-
-    This class provides specialized configuration options for Intel RealSense cameras,
-    including support for depth sensing and device identification via serial number or name.
-
-    Example configurations for Intel RealSense D405:
-    ```python
-    # Basic configurations
-    RealSenseCameraConfig("0123456789", 30, 1280, 720)   # 1280x720 @ 30FPS
-    RealSenseCameraConfig("0123456789", 60, 640, 480)   # 640x480 @ 60FPS
-
-    # Advanced configurations
-    RealSenseCameraConfig("0123456789", 30, 640, 480, use_depth=True)  # With depth sensing
-    RealSenseCameraConfig("0123456789", 30, 640, 480, rotation=Cv2Rotation.ROTATE_90)     # With 90° rotation
-    ```
-
-    Attributes:
-        fps: Requested frames per second for the color stream.
-        width: Requested frame width in pixels for the color stream.
-        height: Requested frame height in pixels for the color stream.
-        serial_number_or_name: Unique serial number or human-readable name to identify the camera.
-        color_mode: Color mode for image output (RGB or BGR). Defaults to RGB.
-        use_depth: Whether to enable depth stream. Defaults to False.
-        rotation: Image rotation setting (0°, 90°, 180°, or 270°). Defaults to no rotation.
-        warmup_s: Time reading frames before returning from connect (in seconds)
-
-    Note:
-        - Either name or serial_number must be specified.
-        - Depth stream configuration (if enabled) will use the same FPS as the color stream.
-        - The actual resolution and FPS may be adjusted by the camera to the nearest supported mode.
-        - For `fps`, `width` and `height`, either all of them need to be set, or none of them.
-    """
-
-    serial_number_or_name: str
-    color_mode: ColorMode = ColorMode.RGB
-    use_depth: bool = False
-    rotation: Cv2Rotation = Cv2Rotation.NO_ROTATION
-    warmup_s: int = 1
-
-    def __post_init__(self):
-        if self.color_mode not in (ColorMode.RGB, ColorMode.BGR):
-            raise ValueError(
-                f"`color_mode` is expected to be {ColorMode.RGB.value} or {ColorMode.BGR.value}, but {self.color_mode} is provided."
-            )
-
-        if self.rotation not in (
-            Cv2Rotation.NO_ROTATION,
-            Cv2Rotation.ROTATE_90,
-            Cv2Rotation.ROTATE_180,
-            Cv2Rotation.ROTATE_270,
-        ):
-            raise ValueError(
-                f"`rotation` is expected to be in {(Cv2Rotation.NO_ROTATION, Cv2Rotation.ROTATE_90, Cv2Rotation.ROTATE_180, Cv2Rotation.ROTATE_270)}, but {self.rotation} is provided."
-            )
-
-        values = (self.fps, self.width, self.height)
-        if any(v is not None for v in values) and any(v is None for v in values):
-            raise ValueError(
-                "For `fps`, `width` and `height`, either all of them need to be set, or none of them."
-            )

lerobot/common/cameras/utils.py

@@ -1,65 +0,0 @@
-#!/usr/bin/env python
-
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import platform
-from pathlib import Path
-from typing import TypeAlias
-
-from .camera import Camera
-from .configs import CameraConfig, Cv2Rotation
-
-IndexOrPath: TypeAlias = int | Path
-
-
-def make_cameras_from_configs(camera_configs: dict[str, CameraConfig]) -> dict[str, Camera]:
-    cameras = {}
-
-    for key, cfg in camera_configs.items():
-        if cfg.type == "opencv":
-            from .opencv import OpenCVCamera
-
-            cameras[key] = OpenCVCamera(cfg)
-
-        elif cfg.type == "intelrealsense":
-            from .realsense.camera_realsense import RealSenseCamera
-
-            cameras[key] = RealSenseCamera(cfg)
-        else:
-            raise ValueError(f"The motor type '{cfg.type}' is not valid.")
-
-    return cameras
-
-
-def get_cv2_rotation(rotation: Cv2Rotation) -> int | None:
-    import cv2
-
-    if rotation == Cv2Rotation.ROTATE_90:
-        return cv2.ROTATE_90_CLOCKWISE
-    elif rotation == Cv2Rotation.ROTATE_180:
-        return cv2.ROTATE_180
-    elif rotation == Cv2Rotation.ROTATE_270:
-        return cv2.ROTATE_90_COUNTERCLOCKWISE
-    else:
-        return None
-
-
-def get_cv2_backend() -> int:
-    import cv2
-
-    if platform.system() == "Windows":
-        return cv2.CAP_AVFOUNDATION
-    else:
-        return cv2.CAP_ANY

lerobot/common/constants.py

@@ -1,31 +1,15 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
 # keys
 import os
 from pathlib import Path
 
 from huggingface_hub.constants import HF_HOME
 
-OBS_ENV_STATE = "observation.environment_state"
-OBS_STATE = "observation.state"
+OBS_ENV = "observation.environment_state"
+OBS_ROBOT = "observation.state"
 OBS_IMAGE = "observation.image"
 OBS_IMAGES = "observation.images"
 ACTION = "action"
 
-ROBOTS = "robots"
-TELEOPERATORS = "teleoperators"
-
 # files & directories
 CHECKPOINTS_DIR = "checkpoints"
 LAST_CHECKPOINT_LINK = "last"
@@ -37,16 +21,12 @@ OPTIMIZER_STATE = "optimizer_state.safetensors"
 OPTIMIZER_PARAM_GROUPS = "optimizer_param_groups.json"
 SCHEDULER_STATE = "scheduler_state.json"
 
+# cache dir
+default_cache_path = Path(HF_HOME) / "lerobot"
+HF_LEROBOT_HOME = Path(os.getenv("HF_LEROBOT_HOME", default_cache_path)).expanduser()
+
 if "LEROBOT_HOME" in os.environ:
     raise ValueError(
         f"You have a 'LEROBOT_HOME' environment variable set to '{os.getenv('LEROBOT_HOME')}'.\n"
         "'LEROBOT_HOME' is deprecated, please use 'HF_LEROBOT_HOME' instead."
     )
-
-# cache dir
-default_cache_path = Path(HF_HOME) / "lerobot"
-HF_LEROBOT_HOME = Path(os.getenv("HF_LEROBOT_HOME", default_cache_path)).expanduser()
-
-# calibration dir
-default_calibration_path = HF_LEROBOT_HOME / "calibration"
-HF_LEROBOT_CALIBRATION = Path(os.getenv("HF_LEROBOT_CALIBRATION", default_calibration_path)).expanduser()

lerobot/common/datasets/backward_compatibility.py

@@ -1,17 +1,3 @@
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 import packaging.version
 
 V2_MESSAGE = """

lerobot/common/datasets/factory.py

@@ -49,7 +49,7 @@ def resolve_delta_timestamps(
                 "observation.state": [-0.04, -0.02, 0]
                 "observation.action": [-0.02, 0, 0.02]
             }
-            returns `None` if the resulting dict is empty.
+            returns `None` if the the resulting dict is empty.
     """
     delta_timestamps = {}
     for key in ds_meta.features:

lerobot/common/datasets/image_writer.py

@@ -106,7 +106,7 @@ def worker_process(queue: queue.Queue, num_threads: int):
 class AsyncImageWriter:
     """
     This class abstract away the initialisation of processes or/and threads to
-    save images on disk asynchronously, which is critical to control a robot and record data
+    save images on disk asynchrounously, which is critical to control a robot and record data
     at a high frame rate.
 
     When `num_processes=0`, it creates a threads pool of size `num_threads`.

lerobot/common/datasets/lerobot_dataset.py

@@ -48,6 +48,7 @@ from lerobot.common.datasets.utils import (
     embed_images,
     get_delta_indices,
     get_episode_data_index,
+    get_features_from_robot,
     get_hf_features_from_features,
     get_safe_version,
     hf_transform_to_torch,
@@ -66,11 +67,11 @@ from lerobot.common.datasets.utils import (
 )
 from lerobot.common.datasets.video_utils import (
     VideoFrame,
-    decode_video_frames,
+    decode_video_frames_torchvision,
     encode_video_frames,
-    get_safe_default_codec,
     get_video_info,
 )
+from lerobot.common.robot_devices.robots.utils import Robot
 
 CODEBASE_VERSION = "v2.1"
 
@@ -302,9 +303,10 @@ class LeRobotDatasetMetadata:
         cls,
         repo_id: str,
         fps: int,
-        features: dict,
-        robot_type: str | None = None,
         root: str | Path | None = None,
+        robot: Robot | None = None,
+        robot_type: str | None = None,
+        features: dict | None = None,
         use_videos: bool = True,
     ) -> "LeRobotDatasetMetadata":
         """Creates metadata for a LeRobotDataset."""
@@ -314,27 +316,33 @@ class LeRobotDatasetMetadata:
 
         obj.root.mkdir(parents=True, exist_ok=False)
 
-        # if robot is not None:
-        #     features = get_features_from_robot(robot, use_videos)
-        #     robot_type = robot.robot_type
-        #     if not all(cam.fps == fps for cam in robot.cameras.values()):
-        #         logging.warning(
-        #             f"Some cameras in your {robot.robot_type} robot don't have an fps matching the fps of your dataset."
-        #             "In this case, frames from lower fps cameras will be repeated to fill in the blanks."
-        #         )
+        if robot is not None:
+            features = get_features_from_robot(robot, use_videos)
+            robot_type = robot.robot_type
+            if not all(cam.fps == fps for cam in robot.cameras.values()):
+                logging.warning(
+                    f"Some cameras in your {robot.robot_type} robot don't have an fps matching the fps of your dataset."
+                    "In this case, frames from lower fps cameras will be repeated to fill in the blanks."
+                )
+        elif features is None:
+            raise ValueError(
+                "Dataset features must either come from a Robot or explicitly passed upon creation."
+            )
+        else:
+            # TODO(aliberts, rcadene): implement sanity check for features
+            features = {**features, **DEFAULT_FEATURES}
 
-        # TODO(aliberts, rcadene): implement sanity check for features
-        features = {**features, **DEFAULT_FEATURES}
+            # check if none of the features contains a "/" in their names,
+            # as this would break the dict flattening in the stats computation, which uses '/' as separator
+            for key in features:
+                if "/" in key:
+                    raise ValueError(f"Feature names should not contain '/'. Found '/' in feature '{key}'.")
 
-        # check if none of the features contains a "/" in their names,
-        # as this would break the dict flattening in the stats computation, which uses '/' as separator
-        for key in features:
-            if "/" in key:
-                raise ValueError(f"Feature names should not contain '/'. Found '/' in feature '{key}'.")
+            features = {**features, **DEFAULT_FEATURES}
 
         obj.tasks, obj.task_to_task_index = {}, {}
         obj.episodes_stats, obj.stats, obj.episodes = {}, {}, {}
-        obj.info = create_empty_dataset_info(CODEBASE_VERSION, fps, features, use_videos, robot_type)
+        obj.info = create_empty_dataset_info(CODEBASE_VERSION, fps, robot_type, features, use_videos)
         if len(obj.video_keys) > 0 and not use_videos:
             raise ValueError()
         write_json(obj.info, obj.root / INFO_PATH)
@@ -454,8 +462,8 @@ class LeRobotDataset(torch.utils.data.Dataset):
             download_videos (bool, optional): Flag to download the videos. Note that when set to True but the
                 video files are already present on local disk, they won't be downloaded again. Defaults to
                 True.
-            video_backend (str | None, optional): Video backend to use for decoding videos. Defaults to torchcodec when available int the platform; otherwise, defaults to 'pyav'.
-                You can also use the 'pyav' decoder used by Torchvision, which used to be the default option, or 'video_reader' which is another decoder of Torchvision.
+            video_backend (str | None, optional): Video backend to use for decoding videos. There is currently
+                a single option which is the pyav decoder used by Torchvision. Defaults to pyav.
         """
         super().__init__()
         self.repo_id = repo_id
@@ -465,7 +473,7 @@ class LeRobotDataset(torch.utils.data.Dataset):
         self.episodes = episodes
         self.tolerance_s = tolerance_s
         self.revision = revision if revision else CODEBASE_VERSION
-        self.video_backend = video_backend if video_backend else get_safe_default_codec()
+        self.video_backend = video_backend if video_backend else "pyav"
         self.delta_indices = None
 
         # Unused attributes
@@ -699,7 +707,9 @@ class LeRobotDataset(torch.utils.data.Dataset):
         item = {}
         for vid_key, query_ts in query_timestamps.items():
             video_path = self.root / self.meta.get_video_file_path(ep_idx, vid_key)
-            frames = decode_video_frames(video_path, query_ts, self.tolerance_s, self.video_backend)
+            frames = decode_video_frames_torchvision(
+                video_path, query_ts, self.tolerance_s, self.video_backend
+            )
             item[vid_key] = frames.squeeze(0)
 
         return item
@@ -776,7 +786,7 @@ class LeRobotDataset(torch.utils.data.Dataset):
         else:
             self.image_writer.save_image(image=image, fpath=fpath)
 
-    def add_frame(self, frame: dict, task: str, timestamp: float | None = None) -> None:
+    def add_frame(self, frame: dict) -> None:
         """
         This function only adds the frame to the episode_buffer. Apart from images — which are written in a
         temporary directory — nothing is written to disk. To save those frames, the 'save_episode()' method
@@ -794,14 +804,17 @@ class LeRobotDataset(torch.utils.data.Dataset):
 
         # Automatically add frame_index and timestamp to episode buffer
         frame_index = self.episode_buffer["size"]
-        if timestamp is None:
-            timestamp = frame_index / self.fps
+        timestamp = frame.pop("timestamp") if "timestamp" in frame else frame_index / self.fps
         self.episode_buffer["frame_index"].append(frame_index)
         self.episode_buffer["timestamp"].append(timestamp)
-        self.episode_buffer["task"].append(task)
 
         # Add frame features to episode_buffer
         for key in frame:
+            if key == "task":
+                # Note: we associate the task in natural language to its task index during `save_episode`
+                self.episode_buffer["task"].append(frame["task"])
+                continue
+
             if key not in self.features:
                 raise ValueError(
                     f"An element of the frame is not in the features. '{key}' not in '{self.features.keys()}'."
@@ -932,7 +945,7 @@ class LeRobotDataset(torch.utils.data.Dataset):
     def stop_image_writer(self) -> None:
         """
         Whenever wrapping this dataset inside a parallelized DataLoader, this needs to be called first to
-        remove the image_writer in order for the LeRobotDataset object to be picklable and parallelized.
+        remove the image_writer in order for the LeRobotDataset object to be pickleable and parallelized.
         """
         if self.image_writer is not None:
             self.image_writer.stop()
@@ -977,9 +990,10 @@ class LeRobotDataset(torch.utils.data.Dataset):
         cls,
         repo_id: str,
         fps: int,
-        features: dict,
         root: str | Path | None = None,
+        robot: Robot | None = None,
         robot_type: str | None = None,
+        features: dict | None = None,
         use_videos: bool = True,
         tolerance_s: float = 1e-4,
         image_writer_processes: int = 0,
@@ -991,9 +1005,10 @@ class LeRobotDataset(torch.utils.data.Dataset):
         obj.meta = LeRobotDatasetMetadata.create(
             repo_id=repo_id,
             fps=fps,
+            root=root,
+            robot=robot,
             robot_type=robot_type,
             features=features,
-            root=root,
             use_videos=use_videos,
         )
         obj.repo_id = obj.meta.repo_id
@@ -1014,7 +1029,7 @@ class LeRobotDataset(torch.utils.data.Dataset):
         obj.delta_timestamps = None
         obj.delta_indices = None
         obj.episode_data_index = None
-        obj.video_backend = video_backend if video_backend is not None else get_safe_default_codec()
+        obj.video_backend = video_backend if video_backend is not None else "pyav"
         return obj
 
 
@@ -1039,7 +1054,7 @@ class MultiLeRobotDataset(torch.utils.data.Dataset):
         super().__init__()
         self.repo_ids = repo_ids
         self.root = Path(root) if root else HF_LEROBOT_HOME
-        self.tolerances_s = tolerances_s if tolerances_s else dict.fromkeys(repo_ids, 0.0001)
+        self.tolerances_s = tolerances_s if tolerances_s else {repo_id: 1e-4 for repo_id in repo_ids}
         # Construct the underlying datasets passing everything but `transform` and `delta_timestamps` which
         # are handled by this class.
         self._datasets = [

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_cabinet.txt

@@ -0,0 +1,85 @@
+https://drive.google.com/file/d/1_SOJkgfP5yZyVjMhTt3nwhvyUjcnlI51/view?usp=drive_link
+https://drive.google.com/file/d/1rmgN8UUzph1qwJnzG1d-uOafodn-gLvb/view?usp=drive_link
+https://drive.google.com/file/d/1NYQ-XxsBVinB6dUoZmVWweT83367P3i2/view?usp=drive_link
+https://drive.google.com/file/d/1oAv_j74zxxCJieMG7r5Vl2BeHK1__3s3/view?usp=drive_link
+https://drive.google.com/file/d/1wFUJQROsrTJt64YRuIeExhFjr2wnK5uu/view?usp=drive_link
+https://drive.google.com/file/d/1KzL3Tt0Le7jVl58XVRUcmigmXjyiuhbK/view?usp=drive_link
+https://drive.google.com/file/d/1qy_YBladeHtianSSGtgAPSHtMin7msvf/view?usp=drive_link
+https://drive.google.com/file/d/1rA_F0V_qL_nyuC_0aBKCisF4-0TIkF2Y/view?usp=drive_link
+https://drive.google.com/file/d/1hw-8qMpz9VgSt62XoASqNRuPECpCwJQP/view?usp=drive_link
+https://drive.google.com/file/d/1BpHOl9rKMzdvNGka6js7C0s40hH6vnDA/view?usp=drive_link
+https://drive.google.com/file/d/1PazhkhiDnJ-OUMyDVDFxEZNKQQqHiNWS/view?usp=drive_link
+https://drive.google.com/file/d/1lZ665R6ATl57dypxH4dGJ2NSt6XYnbuz/view?usp=drive_link
+https://drive.google.com/file/d/1V9HzLaf-tlG15wUzT7KrTDCS_z1vi5NV/view?usp=drive_link
+https://drive.google.com/file/d/1aKauWiXoKqbNwn_2xs4MrmLlaNYlVNmO/view?usp=drive_link
+https://drive.google.com/file/d/1WVD5DFhriO1YmmOgiVHhacR6HWoTPxav/view?usp=drive_link
+https://drive.google.com/file/d/1_X43WgeBAsfkhH9EmpyPki8U9joMeAGC/view?usp=drive_link
+https://drive.google.com/file/d/1t8x0GqWoNKWtnBsB7_D40Z34nL9ak4kf/view?usp=drive_link
+https://drive.google.com/file/d/15V_f26WaKOXjKnq2T3HRWAmtQUi4lbu2/view?usp=drive_link
+https://drive.google.com/file/d/11VFIAsiSDsMOBANgrOcZBpKB9AFWnLy7/view?usp=drive_link
+https://drive.google.com/file/d/1M0NS7vVaxJv3FHnuRYtdwTFYF7We4LxP/view?usp=drive_link
+https://drive.google.com/file/d/1mR0OItTNqFnVLoczcyKYlm6drAy778lO/view?usp=drive_link
+https://drive.google.com/file/d/1NbVFWDQAh-z4JJ4D-Zw6Lps9kdvpqh2j/view?usp=drive_link
+https://drive.google.com/file/d/1JQoZGBzl4W3QG26-n39tefcGN0fDRMbB/view?usp=drive_link
+https://drive.google.com/file/d/1VBjHl-TvZpncopvasIP5G9gecbB2a5f6/view?usp=drive_link
+https://drive.google.com/file/d/1VzSf6zaB21nahm7MsPwroXbJ84NIwq0b/view?usp=drive_link
+https://drive.google.com/file/d/1OtNnfMEydNtZOcivs4k6E_uJSpf8PkGy/view?usp=drive_link
+https://drive.google.com/file/d/14nVvpvsrFr_03Pa_N7MKzwnRwibOUYM6/view?usp=drive_link
+https://drive.google.com/file/d/1M8li6duiO2r3lv_9HhF_XJn0oZUIEK5F/view?usp=drive_link
+https://drive.google.com/file/d/1Cpzea6fO14lxAaNfSBifqoa4ekhCiLD1/view?usp=drive_link
+https://drive.google.com/file/d/1mbxRTm5vlbsY9UJ0jfjM6j9D7kPJjBpG/view?usp=drive_link
+https://drive.google.com/file/d/1RXD1i6IfWsHRlCxVmG04h2h5Ycm_WwZN/view?usp=drive_link
+https://drive.google.com/file/d/1QFqFSwDGOk1BkgGmqgCcc2BRWnJ6R3MA/view?usp=drive_link
+https://drive.google.com/file/d/1bFqWR8DQM0ZUxxtS2bl-RANQvukeFLzp/view?usp=drive_link
+https://drive.google.com/file/d/1pR-rH3yNGoyPdD4hJ6-3lXQ-PstBx9du/view?usp=drive_link
+https://drive.google.com/file/d/107OAwLY-hva9HeQLIK7VCh-ytdDabVjr/view?usp=drive_link
+https://drive.google.com/file/d/1Tpl08QOaSZ37GTO4awFWSdD8wBR9xdlT/view?usp=drive_link
+https://drive.google.com/file/d/1MR164AOM-0S1T6RX8xKTV2IHyaCvpqAW/view?usp=drive_link
+https://drive.google.com/file/d/1_wknJfVnStIhJ82lU_QtcrwahsqYIsr8/view?usp=drive_link
+https://drive.google.com/file/d/1ZuEktWrbYkTx0l5pj3WiZ2CJrfbDOHNo/view?usp=drive_link
+https://drive.google.com/file/d/15G_10hkkkq6yxvyI5NGZirlF-RzduR2F/view?usp=drive_link
+https://drive.google.com/file/d/1DBKxg3ONqh7dhLuX6oh1Yyo2x383V1Hp/view?usp=drive_link
+https://drive.google.com/file/d/1B5iDBkTUr5vopDddV_fHud18SqAHhauS/view?usp=drive_link
+https://drive.google.com/file/d/1acwFV0eenRkki1QcjSKH5xqOtys-P3Pr/view?usp=drive_link
+https://drive.google.com/file/d/1S47BI83xyrh-FKXsvAQqer98Biu_p8XK/view?usp=drive_link
+https://drive.google.com/file/d/1JL6DmBZl3uyq9dyLfgSqtGF06e7E9JwM/view?usp=drive_link
+https://drive.google.com/file/d/16WvRS4Kjog8Pxgr0E3sGGnI01YwL9Uql/view?usp=drive_link
+https://drive.google.com/file/d/12ttGqL33IPWg0-s1SD44rr22M6LiSQBr/view?usp=drive_link
+https://drive.google.com/file/d/1OyZqqnldTU_DliRbr6x0C4a_iWPwIN7j/view?usp=drive_link
+https://drive.google.com/file/d/1oYk00IpLnR9fesLfD15Ebe7nVBffEbcS/view?usp=drive_link
+https://drive.google.com/file/d/1eyE2-MQduCEqCd-5_kl5zsoOEERAzpZD/view?usp=drive_link
+https://drive.google.com/file/d/1ir1Ya-vO0d97pfvbePlUeuKTTRc0qIMU/view?usp=drive_link
+https://drive.google.com/file/d/1hOi-JnqlMt47gVnLZHMTqeojyYVErohl/view?usp=drive_link
+https://drive.google.com/file/d/1NFFw5_PqigQ7xGqsL-MNq2B1r5yAscCf/view?usp=drive_link
+https://drive.google.com/file/d/1uftq1-Zlh8d2sNLWrlVcKYQUwZTD7o24/view?usp=drive_link
+https://drive.google.com/file/d/1-ax19dSLPacVgk000T-m3l4flPcg07pM/view?usp=drive_link
+https://drive.google.com/file/d/126y-lgn86-ZmCz8hooF1THKJGGObw3OB/view?usp=drive_link
+https://drive.google.com/file/d/1JiDniK0VmDIkk92AbBILb8J2Ba59PWML/view?usp=drive_link
+https://drive.google.com/file/d/1kr8nPIRljiU0R4J9SMgj80o1FPQxzu9z/view?usp=drive_link
+https://drive.google.com/file/d/1bbThWRij1pKBh_kFgV8FwK0sXtTHBoLX/view?usp=drive_link
+https://drive.google.com/file/d/1WenzDW6lxk1xkOFm-OiGFfc0ROskAuKU/view?usp=drive_link
+https://drive.google.com/file/d/1MiKRzuzUn1yN-k_6kPJJzIGy7dT-nnsD/view?usp=drive_link
+https://drive.google.com/file/d/17rRg2tcmB-gNhQ0KoZJQmNfyFeoij1jH/view?usp=drive_link
+https://drive.google.com/file/d/11mokBpvrY3ld6sY5WztREtJ1jgqfQV70/view?usp=drive_link
+https://drive.google.com/file/d/1Il_6IOx9NDp1bX_KHizJfBwzTufTmn86/view?usp=drive_link
+https://drive.google.com/file/d/1KswtJGsxJ7eeBDAmNA_aeLjOxcH6MIxa/view?usp=drive_link
+https://drive.google.com/file/d/1gzMhi5uWu4C3Y6WbQ3L-08V96GxTZrRR/view?usp=drive_link
+https://drive.google.com/file/d/1nRQFtaBxfUCYc2W90Qibh0kHCt6YQCfc/view?usp=drive_link
+https://drive.google.com/file/d/1vs-gyW-KheqHbUATwAhA2mmR9GOGw7f_/view?usp=drive_link
+https://drive.google.com/file/d/1MuxzGOA2fgLaHryq82KkQumtuRJGcUOC/view?usp=drive_link
+https://drive.google.com/file/d/1IIwxZnGlqrXLUXqG6yMO0r7uhCvhpk9e/view?usp=drive_link
+https://drive.google.com/file/d/1vE7XPyaFcXP4DtTY5Y9WKIt7zWgmX-Cr/view?usp=drive_link
+https://drive.google.com/file/d/1j-bIV09gr21RC3-x1N_pK4RPLV3fmWKz/view?usp=drive_link
+https://drive.google.com/file/d/1t3nW1rD3S-EL0Oymb5U7ZAj5UMkydkln/view?usp=drive_link
+https://drive.google.com/file/d/14hbfHCdMKtJZ41F9CQReMec2jeRFTOqR/view?usp=drive_link
+https://drive.google.com/file/d/1x-hUyOSne5BW0AzQ3W6_Pf4g5yXQWi9M/view?usp=drive_link
+https://drive.google.com/file/d/1sw9JqRg6E-3P84I3ZhzTrJMu0vuiaMmP/view?usp=drive_link
+https://drive.google.com/file/d/1LuqhQlL4MGZhB_6THmkovRxrlP26BbdC/view?usp=drive_link
+https://drive.google.com/file/d/15C5K6v_lkjnMSmUvVyqHQKwh2N166e7K/view?usp=drive_link
+https://drive.google.com/file/d/1ns_9eSsQeeoZ10nlbkLy8tu0GmJFSnkt/view?usp=drive_link
+https://drive.google.com/file/d/1NpzWJeK6CqjxzjIMYe6aYdX8xGsQwD4o/view?usp=drive_link
+https://drive.google.com/file/d/1NMLezwufKJ9_8xTc9KQThSzVVD71B9Ui/view?usp=drive_link
+https://drive.google.com/file/d/1aa71DCUqs6oXlIxX35jgsmsgm-NlDxPV/view?usp=drive_link
+https://drive.google.com/file/d/1UJzkIZzAL0j-D5YQBnoq7mHvttASy12O/view?usp=drive_link
+https://drive.google.com/file/d/1nPgx36HIJFb7oI94VbRzWjpPP2GANxzG/view?usp=drive_link
+https://drive.google.com/file/d/1NovAP-KVJjqcuvWy3d6G4ptGGAIDqcCx/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_chair.txt

@@ -0,0 +1,55 @@
+https://drive.google.com/file/d/11M3Ye0r5agMaaicPbVGD0q2Hb3rGklbb/view?usp=drive_link
+https://drive.google.com/file/d/1-tx7SvYYgSvXCvnf_EI2OVdwK-CkFY6S/view?usp=drive_link
+https://drive.google.com/file/d/1EWJunmOpMHaU1hE106wwpbkGYcjQXYAF/view?usp=drive_link
+https://drive.google.com/file/d/1IDn95Z7FSiCckrSENtGV4u3RyFHNQSDY/view?usp=drive_link
+https://drive.google.com/file/d/1CwzvWj1i7QOtqrZvsCZ6BdZaKNDfpN32/view?usp=drive_link
+https://drive.google.com/file/d/1HvAvlhm77nAD3Td24QPSeq8lw-Rl_aOh/view?usp=drive_link
+https://drive.google.com/file/d/1t-suKYOPhXH666RpAYNRp2QU_DOy3AeM/view?usp=drive_link
+https://drive.google.com/file/d/18xpKgWh7RWyjMN5PkLTOo-AxsAadAuRw/view?usp=drive_link
+https://drive.google.com/file/d/1oci5Eto-ztv-AQNz8EnwZveBIhxvk-xJ/view?usp=drive_link
+https://drive.google.com/file/d/1Y-t_4vxdE6NpHO0DLJR8f3mD0Q-Wj5-c/view?usp=drive_link
+https://drive.google.com/file/d/1lylRqbbbB8bgtpsBWMPACmHJreuKmllv/view?usp=drive_link
+https://drive.google.com/file/d/1yliSyMig_NXShWfQx6qyW7Ijf2Y5lFK6/view?usp=drive_link
+https://drive.google.com/file/d/1XXhwJsJbeb7KXAooGvJapnm9bjnGUmxS/view?usp=drive_link
+https://drive.google.com/file/d/1_xs1f3hW2JArKyvfF7UWubWjyROGTLs6/view?usp=drive_link
+https://drive.google.com/file/d/1WVEHpr6EqKCZbkHapQSTXJq4xE4SWFT-/view?usp=drive_link
+https://drive.google.com/file/d/1RqOHv9pEQGvW8NUA7ynffFmG999TL_Az/view?usp=drive_link
+https://drive.google.com/file/d/1cu5AgD2gh-uA3PFJmzxxzNaF3qOSlYY1/view?usp=drive_link
+https://drive.google.com/file/d/1SsrXqiPclNrnYToPZ9Uq-k3y0C4qdHT1/view?usp=drive_link
+https://drive.google.com/file/d/1-J7EXf0vjkLIfSqT8ICEsP6CTjzSLBop/view?usp=drive_link
+https://drive.google.com/file/d/11O7ewUmoZXfyyKjy_6B5RW4DpjICxqBT/view?usp=drive_link
+https://drive.google.com/file/d/1iic44kZoCsjNsfAz2cMstZ9-WQvAhblF/view?usp=drive_link
+https://drive.google.com/file/d/1yLV1lVX-2WnWQldGlnQZ0x7QBuDiVkL3/view?usp=drive_link
+https://drive.google.com/file/d/1Tybp9ru98TTbGn4eyROpUQwDFuALWXmk/view?usp=drive_link
+https://drive.google.com/file/d/13E9OTMiipVJByDs5-J19oWwAz7l94LTN/view?usp=drive_link
+https://drive.google.com/file/d/1EeTpJQdMSliw4JzSMtJ6CyTvVdexjM4M/view?usp=drive_link
+https://drive.google.com/file/d/1NHyNwoFqzeAu-1_PSpq5JfxaiD_xbpn9/view?usp=drive_link
+https://drive.google.com/file/d/1fJcS0phDp4xm_FyGaJ5wr9Pe4KqtHaxD/view?usp=drive_link
+https://drive.google.com/file/d/12AqrLUaewDPEcFRqPZeZFb_TQ0Lfi3At/view?usp=drive_link
+https://drive.google.com/file/d/1x_hd4Qsq1oJS-aj2t3qM7WbbV7KZj05b/view?usp=drive_link
+https://drive.google.com/file/d/14OUSUArmsB068hs6BuEIXQhI1Cyz8Sf0/view?usp=drive_link
+https://drive.google.com/file/d/16zlzh1T5zeUJQnFf382NXkFEKEnDub4O/view?usp=drive_link
+https://drive.google.com/file/d/1IbDltmN-NEFCNtr1TO4ILxEgQ94rtjWv/view?usp=drive_link
+https://drive.google.com/file/d/15gmlf8Gx9455pZ1AlqcCSwh3nDPxMzSr/view?usp=drive_link
+https://drive.google.com/file/d/1qHpRL1oZfIMo_vxnm8qfwQ-7l0BZIVva/view?usp=drive_link
+https://drive.google.com/file/d/1H1xskIgiFZivkYn23rMzH3xePGOh3VTC/view?usp=drive_link
+https://drive.google.com/file/d/1avls6Pv0kYiCMNVknbc1zQsgy64MUDMM/view?usp=drive_link
+https://drive.google.com/file/d/1MmWVgCj5khc8KMIifmt3EzF1o-CtPyyn/view?usp=drive_link
+https://drive.google.com/file/d/1U0kCc_xqW0WNppf4sbnK14euWKdPZtzB/view?usp=drive_link
+https://drive.google.com/file/d/16CaEyQscOuhLj23PEGDTL9DeyNkohkMn/view?usp=drive_link
+https://drive.google.com/file/d/1Iu8uM6UUJ0zW8tvN-9UiOe_4oSNzEutg/view?usp=drive_link
+https://drive.google.com/file/d/1UImqiBaIxCR-1DNJaZhHqeHhaySOtVIr/view?usp=drive_link
+https://drive.google.com/file/d/1VpU2V_leIoRIyv_lAvE7eLHBG8DxCTnp/view?usp=drive_link
+https://drive.google.com/file/d/1_Q8J27OT3Xby7QY6yHvIJauFRWEMxkRm/view?usp=drive_link
+https://drive.google.com/file/d/1bantmVo1L9Xz4tbiNw_a1UC2Z_HPO1wT/view?usp=drive_link
+https://drive.google.com/file/d/1IRIXMJMCBDkBjbaHvAlEiBogSvZ1jK_3/view?usp=drive_link
+https://drive.google.com/file/d/1mAHXKjiFbjwydypW2t5Lv8_H5x6nHegl/view?usp=drive_link
+https://drive.google.com/file/d/1SfyY796fLrBCMY39OcyuxZafqSCRZPZk/view?usp=drive_link
+https://drive.google.com/file/d/1X-44sZ8CcfzIskc0dvSx882o1yFhHaZB/view?usp=drive_link
+https://drive.google.com/file/d/1BOIWCCCk6DLD4Bmvc75ZbbLi9AQm-1ao/view?usp=drive_link
+https://drive.google.com/file/d/1RuyDtRE1kk76sw-wP8vx5SgLoPF3PA_H/view?usp=drive_link
+https://drive.google.com/file/d/1c4eoQiBbGuy3CTAQDUSkd84Ponh1roAQ/view?usp=drive_link
+https://drive.google.com/file/d/19PXB9z4Ljq6dsbf9TqcOrrP5SRbw2Tc_/view?usp=drive_link
+https://drive.google.com/file/d/1nn1VVZVoIXWdYDozR7XHXE4mPLQG80PQ/view?usp=drive_link
+https://drive.google.com/file/d/1MBdFGOKPV8GUhwoSsJ_Ky3qAMLM2Bv3K/view?usp=drive_link
+https://drive.google.com/file/d/1of3k_M-7Nh3I1TndcWedxK4ca9dn8Sc5/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_elevator.txt

@@ -0,0 +1,20 @@
+https://drive.google.com/file/d/12ctkOAdkCNGN1JLbZb5ww3XTBn2LFpGI/view?usp=drive_link
+https://drive.google.com/file/d/1G_Vd46_4fq6O64gHHjUbJX5Ld44ZZx0y/view?usp=drive_link
+https://drive.google.com/file/d/1uKgUy73B3xBogQAOUhfZjO0X5qZGsi2c/view?usp=drive_link
+https://drive.google.com/file/d/1fu9cIrfI-fE2LhdGUxbx7-8Ci_PF8Ypm/view?usp=drive_link
+https://drive.google.com/file/d/1Ygk9ZPJzx8xw2A9JF3NHbJ44TqnvSTQR/view?usp=drive_link
+https://drive.google.com/file/d/18m5xPuccNsEB20WPshm3zhxmXc6k63ED/view?usp=drive_link
+https://drive.google.com/file/d/1DiqqxC44rriviRQpqogcv0-EB-Y6nr9g/view?usp=drive_link
+https://drive.google.com/file/d/1qPdaoTVDizJXkfXLioWU7iJ8hqCXSyOQ/view?usp=drive_link
+https://drive.google.com/file/d/1Fj9kIA_mG7f67WFfACJEaZ7izcHG7vUm/view?usp=drive_link
+https://drive.google.com/file/d/1WpYehZnI2P7dUdJPfkE-ij1rqCnjZEbB/view?usp=drive_link
+https://drive.google.com/file/d/1_zwWkT4jPyzB38STWb6whlzsPzXmfA9r/view?usp=drive_link
+https://drive.google.com/file/d/1U6-J4I_fPlSFFGfhZPxS5_YzKXwXIZYp/view?usp=drive_link
+https://drive.google.com/file/d/1pRhxxcTfZp5tQo_EScvJUwfc3amiS6Vk/view?usp=drive_link
+https://drive.google.com/file/d/1lWLntqra83RlYU_gN7Vostnfydf6gutd/view?usp=drive_link
+https://drive.google.com/file/d/1vIBKo0x-NYEHV1FvRpco1lQMpRdAWAIL/view?usp=drive_link
+https://drive.google.com/file/d/1pdrLV3JTQou_XH0Aap61Ssf60iVKm1jJ/view?usp=drive_link
+https://drive.google.com/file/d/1QTsLoQ7SwmKdQHjBGVDaR2uTwfFwtrOf/view?usp=drive_link
+https://drive.google.com/file/d/1Gytai8M_12J36GY6L_TulEcOC-035jwS/view?usp=drive_link
+https://drive.google.com/file/d/14LJudNc629NT-i8xreXtzl27ce_DxOFJ/view?usp=drive_link
+https://drive.google.com/file/d/1sBvPCODbzxGAI0S3lgN5cSG9Go3lRi00/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_shrimp.txt

@@ -0,0 +1,18 @@
+https://drive.google.com/file/d/1MJn9GbC8p9lN4gC9KDMLEkTkP_gGpXj0/view?usp=drive_link
+https://drive.google.com/file/d/1-4LXgjl7ZCOgp-8GCJmFRD8OeqN5Jf7-/view?usp=drive_link
+https://drive.google.com/file/d/1Ho06Ce0SPbqU3juaMxNUwAt3zCRLGC8W/view?usp=drive_link
+https://drive.google.com/file/d/1ivHoj7_7olBSxH-Y8kqXEW7ttITK-45j/view?usp=drive_link
+https://drive.google.com/file/d/1qjY4hM_IvZ8cq2II_n9MeJbvyeuN4oBP/view?usp=drive_link
+https://drive.google.com/file/d/1rKVhO_f92-7sw13T8hTVrza3B9oAVgoy/view?usp=drive_link
+https://drive.google.com/file/d/1pcLPHO8fBkc1-CRa88tyQtEueE4xiXNi/view?usp=drive_link
+https://drive.google.com/file/d/1Vev_chCsIeEdvQ8poEYNsOJFGy_QU8kZ/view?usp=drive_link
+https://drive.google.com/file/d/1l5G4zpRkxSLCQjvGPYSN4zfCvVRQuzMz/view?usp=drive_link
+https://drive.google.com/file/d/14vgthE1eoakXkr2-DRw50E6lAqYOiUuE/view?usp=drive_link
+https://drive.google.com/file/d/17nPSmKKmgQ2B7zkzWrZYiLM3RBuFod82/view?usp=drive_link
+https://drive.google.com/file/d/1QcDsxplVvb_ID9BVrihl5FvlC-j7waXi/view?usp=drive_link
+https://drive.google.com/file/d/18pEejBpI-eEVaWAAjBCyC0vgbX3T1Esj/view?usp=drive_link
+https://drive.google.com/file/d/1H8eH6_IRODtEFT6WoM77ltR5OoOrqXmI/view?usp=drive_link
+https://drive.google.com/file/d/1IWlpFRZhoxyG4nS13CWK4leZVk5wbNx4/view?usp=drive_link
+https://drive.google.com/file/d/1PbZA8_OCGmMLxNP9xbkLRSChniL4uGxl/view?usp=drive_link
+https://drive.google.com/file/d/1p9XAdmG2f_WeflNO4DIJ_tr1rK6M9B4B/view?usp=drive_link
+https://drive.google.com/file/d/1nS59Et1cNAvKo3Y4SeSGRuZD5TvBbCF3/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_wash_pan.txt

@@ -0,0 +1 @@
+https://drive.google.com/drive/folders/1S8eFg98IaGAIKVZ8QFWG1bx4mHa-O204

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/mobile_wipe_wine.txt

@@ -0,0 +1,4 @@
+https://drive.google.com/drive/folders/1tC_g1AJ8lglBLY-fjsQrG6DMBa3Ucp-0
+https://drive.google.com/file/d/1fG_Yi2MJrFjiUVN3XoiWXLtTxHlwwaDv/view?usp=drive_link
+https://drive.google.com/file/d/1WX32VWfzzX3Blmd06DRxLwFbMJfVe7P4/view?usp=drive_link
+https://drive.google.com/file/d/18onsX3vXg3xkFwP5bVUCjdV4n9TRn0C9/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/sim_insertion_human.txt

@@ -0,0 +1,3 @@
+https://drive.google.com/drive/folders/1RgyD0JgTX30H4IM5XZn8I3zSV_mr8pyF
+https://drive.google.com/file/d/18Cudl6nikDtgRolea7je8iF_gGKzynOP/view?usp=drive_link
+https://drive.google.com/file/d/1C1kZYyROzs-PrLc0SkDgUgMi4-L3lauE/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/sim_insertion_scripted.txt

@@ -0,0 +1,3 @@
+https://drive.google.com/drive/folders/1TsojQQSXtHEoGnqgJ3gmpPQR2DPLtS2N
+https://drive.google.com/file/d/1wfMSZ24oOh5KR_0aaP3Cnu_c4ZCveduB/view?usp=drive_link
+https://drive.google.com/file/d/17EuCUWS6uCCr6yyNzpXdcdE-_TTNCKtf/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/sim_transfer_cube_human.txt

@@ -0,0 +1,3 @@
+https://drive.google.com/drive/folders/1sc-E4QYW7A0o23m1u2VWNGVq5smAsfCo
+https://drive.google.com/file/d/18smMymtr8tIxaNUQ61gW6dG50pt3MvGq/view?usp=drive_link
+https://drive.google.com/file/d/1Nk7l53d9sJoGDBKAOnNrExX5nLacATc6/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/sim_transfer_cube_scripted.txt

@@ -0,0 +1,3 @@
+https://drive.google.com/drive/folders/1aRyoOhQwxhyt1J8XgEig4s6kzaw__LXj
+https://drive.google.com/file/d/1pnGIOd-E4-rhz2P3VxpknMKRZCoKt6eI/view?usp=drive_link
+https://drive.google.com/file/d/1GKReZHrXU73NMiC5zKCq_UtqPVtYq8eo/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_battery.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/19qS_n7vKgDcPeTMnvDHQ5-n73xEbJz5D
+https://drive.google.com/file/d/1oC31By0A2bsBeHyUwBdQw1z4ng6yi9Za/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_candy.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1m5rQ6UVH8Q9RQp_6c0CxkQ88-L-ScO7q
+https://drive.google.com/file/d/1wHz2qcmwcVG0C0CZ9MjQDQcmj4OY9_a3/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_coffee.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1seQGay470nGQ-knBI5TjsTr8iL9Qws5q
+https://drive.google.com/file/d/1T89hSX5U99wLGvGTE7yUBaQPOpyj6Sai/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_coffee_new.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1t3eDc5Rg0DveyRe8oTm6Dia_FYU5mXyf
+https://drive.google.com/file/d/1TXFaduTakvS0ZWJqKCX-HIvYglum_5CY/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_cups_open.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1Z9X3DNzd6LS0FFjQemNUMoMA5yk5VQOh
+https://drive.google.com/file/d/1Wlyc0vTkjXuWB6zbaVOWhEfD7BmPgUV_/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_fork_pick_up.txt

@@ -0,0 +1,53 @@
+https://drive.google.com/drive/folders/1DYgB4ifX4uIid9m9jnC0Zdz8Nf7ZC0fc
+https://drive.google.com/file/d/1Eb-NRNk_FmVleCbU_Ng5Y4dfcjTKN7Rv/view?usp=drive_link
+https://drive.google.com/file/d/1dkhjEADakT-44l9jf-nK4x89kr4yG_qb/view?usp=drive_link
+https://drive.google.com/file/d/14hDhgcZkVqNExGb4tIXpSjMshhqZETch/view?usp=drive_link
+https://drive.google.com/file/d/1zVMEHpHbuNyP5A_lYU7RPSLB-4V0yfZw/view?usp=drive_link
+https://drive.google.com/file/d/1JtgDjBvy7FnRpFzrx_foC3quorYQFAR-/view?usp=drive_link
+https://drive.google.com/file/d/1EHdneB6F-PP0dQlX8qPaXbxmKoBy_YwO/view?usp=drive_link
+https://drive.google.com/file/d/17Z0jjVBy1OPKREPu77_n_rQzorDiapji/view?usp=drive_link
+https://drive.google.com/file/d/1F4i23qPJ_qTf5jWjfLo4ARGJChznYWt3/view?usp=drive_link
+https://drive.google.com/file/d/1kZtXWM3uS0-rLblydBfJ0mMcVnMMXw9w/view?usp=drive_link
+https://drive.google.com/file/d/1mNODox87xFfY5Z_o5mcLsr8SHb39jDik/view?usp=drive_link
+https://drive.google.com/file/d/1Ob44VdmEUA93FKDECiRb5Ogz2xQg5IWp/view?usp=drive_link
+https://drive.google.com/file/d/1fdQLdjj3Cwv33R1wZhfrLz9Del8mqgHb/view?usp=drive_link
+https://drive.google.com/file/d/1Yu3L3ft21zP__XL8pCfhb788ZleuW1n5/view?usp=drive_link
+https://drive.google.com/file/d/1ozBBWXVZ9hXDh9ooHUNroHdYm8UDqnhJ/view?usp=drive_link
+https://drive.google.com/file/d/1o0TGqvfWw_Lunxb5ubKDS21Lr_WC0h75/view?usp=drive_link
+https://drive.google.com/file/d/1jZnd5eP5L6BH5l98BPN6OnoQx3fu8e9n/view?usp=drive_link
+https://drive.google.com/file/d/1S5sYbz8wcLYp0V67v13i4PRcBxodn4Hg/view?usp=drive_link
+https://drive.google.com/file/d/1rFeg_x6ftJYwPtBv34D3h2L2cpDLeR4G/view?usp=drive_link
+https://drive.google.com/file/d/1GvS3lcm4o6nm_scUk0XxKeVFNmzjucDZ/view?usp=drive_link
+https://drive.google.com/file/d/1-9i0riphC7NhhDahcQfD1QoBXP5gF90A/view?usp=drive_link
+https://drive.google.com/file/d/15p_IqGsMbKuvzMS872THAZr-3SBtb1Fr/view?usp=drive_link
+https://drive.google.com/file/d/1ToyYcBfJL8gbQn0q_59zPLsFmm7dmMJo/view?usp=drive_link
+https://drive.google.com/file/d/1e_7PNH7CYafE4pAebP7ZdI7XFbmEcy_i/view?usp=drive_link
+https://drive.google.com/file/d/1JoabvGVsIQdug2xOhUIhetEIyDM91y_Y/view?usp=drive_link
+https://drive.google.com/file/d/1kOMw1y0lmnVaCjwZICfzCsx6e0Z8MNGR/view?usp=drive_link
+https://drive.google.com/file/d/16it_wd1JOevUQTK2_CvF_pBACTgpIPgM/view?usp=drive_link
+https://drive.google.com/file/d/1IRcCj9HnJSfbyMgr5XEERGlEnWeZQwOc/view?usp=drive_link
+https://drive.google.com/file/d/1Z2dIJfq_S3liGmPN9Rphvkmucnmw7tlb/view?usp=drive_link
+https://drive.google.com/file/d/1J3NoAjzndGx9yNyaBOJHdNny1epzUoBt/view?usp=drive_link
+https://drive.google.com/file/d/18nOvxV1k8FSmBrhT4TPo2sKKSZXougyx/view?usp=drive_link
+https://drive.google.com/file/d/1CT8FxclafFMjSd7gCWVw3VSeryeiF04i/view?usp=drive_link
+https://drive.google.com/file/d/16M9KVqQMFfSsXfypK0bocFft8Nz3j2Rt/view?usp=drive_link
+https://drive.google.com/file/d/18QPVkw6bj6HW8LTPrQLWrrUX4R6RcF42/view?usp=drive_link
+https://drive.google.com/file/d/1hQTVtA5hBTE_StXpJafTZJ3tgt2VQQ_t/view?usp=drive_link
+https://drive.google.com/file/d/1Dn-d5g69H6EgAWgsFdrcbJKtz7ySsCQ8/view?usp=drive_link
+https://drive.google.com/file/d/13hMr16483P7ALYv73yMRUN37fJdVQM62/view?usp=drive_link
+https://drive.google.com/file/d/1848yN3XMN5zJMEgApt6KzrWgfRPfimtv/view?usp=drive_link
+https://drive.google.com/file/d/1oAD9kSnS0fTgj-CjD4u9VdZ5X67IOIMa/view?usp=drive_link
+https://drive.google.com/file/d/1ilzIWLCCG5b_KgF5s0wdN2I5-lFNpwC1/view?usp=drive_link
+https://drive.google.com/file/d/1rjsT2YBjnidxod1s9s-myAYz8boHr-WB/view?usp=drive_link
+https://drive.google.com/file/d/18Gg48HTub15bd8qzbhiCUufbVy0fbN5G/view?usp=drive_link
+https://drive.google.com/file/d/1WsSnQSqmMTVSRwrhT1Y-v782My2zcjLm/view?usp=drive_link
+https://drive.google.com/file/d/1ea9ZCvoyc-xqiFXgeDcA_mOWsw7VUuoi/view?usp=drive_link
+https://drive.google.com/file/d/1wv1v3-XhPgbNzp62BXbJTDzMPu2tlDUc/view?usp=drive_link
+https://drive.google.com/file/d/18-ikzt8LoZ83Gi3goKCELs4U4z8hrRoF/view?usp=drive_link
+https://drive.google.com/file/d/16Bjhp7JNCXkGuLvyNcZowAx3W-Y-15DV/view?usp=drive_link
+https://drive.google.com/file/d/1Gc-KRI-xwcp1fMR55ugbrLg_5y3SPde-/view?usp=drive_link
+https://drive.google.com/file/d/1oP72Q386Z4Sy5MMm-t5yNogIe5Van_9k/view?usp=drive_link
+https://drive.google.com/file/d/112T90eDUDVH-SyOV7UnZl5bscAH2hcfq/view?usp=drive_link
+https://drive.google.com/file/d/1y-uKOesRRhjgDtFbG_j65f4SGg0v8XDg/view?usp=drive_link
+https://drive.google.com/file/d/1LOP05OagoI3km-ZKQBrS204A85UVk7Ok/view?usp=drive_link
+https://drive.google.com/file/d/1QkHQKgasVzWsmdPvkXgGhWyQ84d93_Az/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_pingpong_test.txt

@@ -0,0 +1 @@
+https://drive.google.com/drive/folders/1Ut2cv6o6Pkfgg46DgwVUM7Z5PkNG8eJ-

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_pro_pencil.txt

@@ -0,0 +1 @@
+https://drive.google.com/drive/folders/1FqxPV0PgvgIu8XFjtvZSPSExuNcxVVAY

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_screw_driver.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1SKtG0ct9q0nVdYssJNMWSOjikcXliT58
+https://drive.google.com/file/d/1nchD21O30B3i3LDoqramo1zgW5YvpJIN/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_tape.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1_4DHf2cma0xsChLQFghwigX6Ukti5-zQ
+https://drive.google.com/file/d/1_8vS4hDNDgUQY-SmekrNaa7dF67QJYU-/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_thread_velcro.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1_4DHf2cma0xsChLQFghwigX6Ukti5-zQ
+https://drive.google.com/file/d/1_8vS4hDNDgUQY-SmekrNaa7dF67QJYU-/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_towel.txt

@@ -0,0 +1,2 @@
+https://drive.google.com/drive/folders/1fAD7vkyTGTFB_nGXIKofCU1U05oE3MFv
+https://drive.google.com/file/d/1XzyQ2B6LLvcurIonOpEu4nij2qwNWshH/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_vinh_cup.txt

@@ -0,0 +1,53 @@
+https://drive.google.com/drive/folders/13EQsVsnxT86K20QAoyE_YpsFbQ7fZQdu
+https://drive.google.com/file/d/1-W_JHghZG65FNTVhw1SXhtQrazdLL3Ue/view?usp=drive_link
+https://drive.google.com/file/d/1VwRJgdWUo-2nQaNM7Bs77-fsm8iwUxEo/view?usp=drive_link
+https://drive.google.com/file/d/1wFzGRo5iYA13WLi6IV1ry64RyahQBFio/view?usp=drive_link
+https://drive.google.com/file/d/1IKtQzQ-n-UTv64hYpReu2R4cqUvmNQqD/view?usp=drive_link
+https://drive.google.com/file/d/1GicVci9OiuuZZH79i5Mg7AtWod94MzwT/view?usp=drive_link
+https://drive.google.com/file/d/1JVnIoR7EIQp70T4eAf9RX65JcTrzsjQc/view?usp=drive_link
+https://drive.google.com/file/d/1W2xr4h23ucjPrc-mBEeqnACsfaImpc0p/view?usp=drive_link
+https://drive.google.com/file/d/10xj_0V7A07o3uCa7v5omUrTC0YlPW8H3/view?usp=drive_link
+https://drive.google.com/file/d/1FOc3EMaCy8Mb0_a7PuXLAwKwvxkbKmwU/view?usp=drive_link
+https://drive.google.com/file/d/143PgDXBcf2GQ0Q07ZPMVMfBgZDd5sLJG/view?usp=drive_link
+https://drive.google.com/file/d/1pE5Tyj0LlGbGWvUzuhixp86Ibu55Ez3I/view?usp=drive_link
+https://drive.google.com/file/d/141668b1VzX80ncrVJPzhkoAeIFB4MEK9/view?usp=drive_link
+https://drive.google.com/file/d/1bw12lo37p1ZvRvErHsll7cEYi2OxscvZ/view?usp=drive_link
+https://drive.google.com/file/d/1zfnMFvbgBjl6SzYhksbaOzfbwLrCN6tb/view?usp=drive_link
+https://drive.google.com/file/d/1-GIszA6mUJMaNB-tdh9r9skc77SWA0VX/view?usp=drive_link
+https://drive.google.com/file/d/1fTB0zWFYU6zh4IIUFT2zX_OkwYqmElwY/view?usp=drive_link
+https://drive.google.com/file/d/1gPIPNKGmrO9c7gKF7SP0SuUYbIBBq8z1/view?usp=drive_link
+https://drive.google.com/file/d/12JeJ-dQd5lYyn6PlDOGdE-ChVeiZ-Uv0/view?usp=drive_link
+https://drive.google.com/file/d/100_20cgCqerU6qoh3TfTbwLy9mlDAFEG/view?usp=drive_link
+https://drive.google.com/file/d/111oAGJ76ku_pYgbBoIdZAC1_XEQcPI__/view?usp=drive_link
+https://drive.google.com/file/d/1UhC8L-354ZQ2gblPFGI35EMsVwfpuKa0/view?usp=drive_link
+https://drive.google.com/file/d/1sIXQSgUR_xdrNtGrL6QGBnkLMKErsIp1/view?usp=drive_link
+https://drive.google.com/file/d/16Ax77bDSIXnsn4GFL8XYKKT1P6bPpfMd/view?usp=drive_link
+https://drive.google.com/file/d/1pgRVYwwVIsWq_qsWqZpe1UBzZfF5Fa9D/view?usp=drive_link
+https://drive.google.com/file/d/1jtimaZkWsY1P5gC2bbS64H_WCUU7HXN2/view?usp=drive_link
+https://drive.google.com/file/d/1N6Bh02P-RiTEgtx1YH1Db_X3TGpP-X_r/view?usp=drive_link
+https://drive.google.com/file/d/14Fy8EwJ8d9Vh97Yt1VOvUChSCrfIjBij/view?usp=drive_link
+https://drive.google.com/file/d/1IRuv42dvIMPuKhcMZmuXaBjJ-lPFOmQd/view?usp=drive_link
+https://drive.google.com/file/d/16XWzNY2D8ucVVn5geBgsVdhm3ppO4que/view?usp=drive_link
+https://drive.google.com/file/d/1xsVOoQgthK_L_SDrmq_JvQgUpAvPEAY8/view?usp=drive_link
+https://drive.google.com/file/d/1bZbw66DyEMvnJnzkdUUNbKjvNKg8KFYM/view?usp=drive_link
+https://drive.google.com/file/d/1CyTVkdrNGGpouCXr4CfhKbMzE6Ah3oo3/view?usp=drive_link
+https://drive.google.com/file/d/1hDRyeM-XEDpHXpptbT8LvNnlQUR3PWOh/view?usp=drive_link
+https://drive.google.com/file/d/1XhHWxbra8Iy5irQZ83IvxwaJqHq9x4s1/view?usp=drive_link
+https://drive.google.com/file/d/1haZcn6aM1o4JlmP9tJj3x2enrxiPaDSD/view?usp=drive_link
+https://drive.google.com/file/d/1ypDyuUTbljaBZ34f-t7lj3O_0bRmyX2n/view?usp=drive_link
+https://drive.google.com/file/d/1ILEEZo_tA9_ChIAprr2mPaNVKZi5vXsO/view?usp=drive_link
+https://drive.google.com/file/d/1U7nVYFaGE8vVTfLCW33D74xOjDcqfgyJ/view?usp=drive_link
+https://drive.google.com/file/d/1rZ93_rmCov5SMDxPkfM3qthcRELZrQX6/view?usp=drive_link
+https://drive.google.com/file/d/1mYO1b_csddtyE3qT6cwLiw-m2w2_1Lxh/view?usp=drive_link
+https://drive.google.com/file/d/1xz7Q5x2jikY8wJQjMRQpRws6AnfWlHm5/view?usp=drive_link
+https://drive.google.com/file/d/1OO8GaO-0FrSZRd1kxMYwBmubyiLOWnbl/view?usp=drive_link
+https://drive.google.com/file/d/1EXn4NVDmf-4_HCy34mYwT-vwK2CFI9ev/view?usp=drive_link
+https://drive.google.com/file/d/10hH70XhXRL9C5SnAG4toHtfHqfJUJo4H/view?usp=drive_link
+https://drive.google.com/file/d/18tiBcxea0guUai4lwsXQvt0q2LZ8ZnnJ/view?usp=drive_link
+https://drive.google.com/file/d/1Q8R8qv37vk5PQ5kQ2ibx6BFLOySD0VpX/view?usp=drive_link
+https://drive.google.com/file/d/17aNriHzjhdibCyuUjQoMFZqjybJZtggG/view?usp=drive_link
+https://drive.google.com/file/d/1LVjEYHSdeKm6CotU1QguIeNEPaIaFl_1/view?usp=drive_link
+https://drive.google.com/file/d/1ufAhE_EkgJ85slg2EW8aW_grOzE_Lmxd/view?usp=drive_link
+https://drive.google.com/file/d/1wtzLtXrkw9eXRGESTPIOlpl1tInu-b2m/view?usp=drive_link
+https://drive.google.com/file/d/1Mk5qvVtD_QHwGOUApRq76TUw2T5THu6f/view?usp=drive_link
+https://drive.google.com/file/d/1y1WQ3hboWVJ68KEYQQ3OhreGuaUpSgwc/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_vinh_cup_left.txt

@@ -0,0 +1,52 @@
+https://drive.google.com/drive/folders/1dxWh6YFZUDt6qXIoxgD9bla3CiFjZ11C
+https://drive.google.com/file/d/1hNBJN00SCAlOl0ZEgm7RRGbAGDjyBs0p/view?usp=drive_link
+https://drive.google.com/file/d/17He0CVwXGeoMmXg4SHKo-osNn7YPKVL7/view?usp=drive_link
+https://drive.google.com/file/d/1laNKUVID1x2CV6a2O2WQjwFewKu4lidL/view?usp=drive_link
+https://drive.google.com/file/d/1pNf36xbZJGRArYLmNAvRj5y6CoqdC6kB/view?usp=drive_link
+https://drive.google.com/file/d/1_4E1-y3JXk5I0ebycLYM70YDPK9g52gZ/view?usp=drive_link
+https://drive.google.com/file/d/1PHfzhGPdbolKyOpS3FnR2w7Q8zUlJXSk/view?usp=drive_link
+https://drive.google.com/file/d/17ls2PPN-Pi3tEuK059cwV2_iDT8aGhOO/view?usp=drive_link
+https://drive.google.com/file/d/1LWsg6PmCT00Kv_N_slrmcwKmQPGoBT3k/view?usp=drive_link
+https://drive.google.com/file/d/12LckrchoHTUVH7rxi8J7zD9dA19GXvoW/view?usp=drive_link
+https://drive.google.com/file/d/1VqrJKjAIkj5gtFXL69grdSeu9CyaqnSw/view?usp=drive_link
+https://drive.google.com/file/d/1g5rQYDBZvW-kUtYPeyF3qmd53v6k7kXu/view?usp=drive_link
+https://drive.google.com/file/d/10kUgaSJ0TS7teaG83G3Rf_DG4XGrBt6A/view?usp=drive_link
+https://drive.google.com/file/d/1je9XmneZQZvTma5adMJICUPDovW3ppei/view?usp=drive_link
+https://drive.google.com/file/d/1v28r6bedwZGbUPVVTVImXhK-42XdtGfj/view?usp=drive_link
+https://drive.google.com/file/d/1-TEEx9sGVvzMMaNXYfQMtY2JJ6cvl0dT/view?usp=drive_link
+https://drive.google.com/file/d/1YdBKdJFP9rJWBUX7qrOYL_gfUA8o6J9M/view?usp=drive_link
+https://drive.google.com/file/d/1X9vffwQHNUSKLXr2RlYNtbWDIFCIDfdF/view?usp=drive_link
+https://drive.google.com/file/d/11hqesqa5kvEe5FABUnZRcvmOhR373cYM/view?usp=drive_link
+https://drive.google.com/file/d/1ltTTECjEcbQPgS3UPRgMzaE2x9n6H7dC/view?usp=drive_link
+https://drive.google.com/file/d/1Zxqfa29JdwT-bfMpivi6IG2vz34d21dD/view?usp=drive_link
+https://drive.google.com/file/d/11LQlVxS5hz494dYUJ_PNRPx2NHIJbQns/view?usp=drive_link
+https://drive.google.com/file/d/1i1JhNtnZpO_E8rAv8gxBP3ZTZRvcvsZi/view?usp=drive_link
+https://drive.google.com/file/d/11jOXAr2EULUO4Qkm748634lg4UUFho5U/view?usp=drive_link
+https://drive.google.com/file/d/1rj67wur8DdB_Pipwx24bY43xu4X1eQ5e/view?usp=drive_link
+https://drive.google.com/file/d/15ZTm6lO6f_JQy_4SNfrOu3iPYn1Ro8mh/view?usp=drive_link
+https://drive.google.com/file/d/1q4gBtqWPJtCwXEvknGgN0WHGp7Vfn1b9/view?usp=drive_link
+https://drive.google.com/file/d/1t17keyre47AYqm8GgXiQ7EcvcUkeSiDQ/view?usp=drive_link
+https://drive.google.com/file/d/1OYUPGxtZgOF86Ng_BEOTXm_XOYpuQPsO/view?usp=drive_link
+https://drive.google.com/file/d/1cBjbGHi3dwWHtx6r9EQJi0JT_CE3LuHt/view?usp=drive_link
+https://drive.google.com/file/d/14qaMyF0mcbCB-fCYKNyo5_2NahSC6D5u/view?usp=drive_link
+https://drive.google.com/file/d/12FgX86eA7Y5co9ULBVK80XMsiKQSs-Ri/view?usp=drive_link
+https://drive.google.com/file/d/1yvoHWidf-jdBVw6qCCXOFfkVwKj_2hPk/view?usp=drive_link
+https://drive.google.com/file/d/1a2SugsSDlC8UtUrFzp-_KAwyZckQOvdQ/view?usp=drive_link
+https://drive.google.com/file/d/1l8pILBFSAosypWJMza2K09Vm7rug9axm/view?usp=drive_link
+https://drive.google.com/file/d/1hfPQ8dBCk97PnOhq6_MIISm3IEzcOxJG/view?usp=drive_link
+https://drive.google.com/file/d/1PPAUwlJCFKpms8cqF_k1v2_fCgDBOc3S/view?usp=drive_link
+https://drive.google.com/file/d/1lVKQZeqFfK3amEmLuFhYLUFQ2eyE8rOW/view?usp=drive_link
+https://drive.google.com/file/d/1K9iPMLfDowcIFoyzpvgn88dQ6x6kVwNG/view?usp=drive_link
+https://drive.google.com/file/d/1PNvMqG9tL7QxeLaYBGHiWYR6SYb5iIct/view?usp=drive_link
+https://drive.google.com/file/d/1xkRtzbvIkUsylx9hrFLGQsJn0h1EYu-5/view?usp=drive_link
+https://drive.google.com/file/d/1nxMRrJlSayjDIfr5CmHO1NzAw3COhsLi/view?usp=drive_link
+https://drive.google.com/file/d/1Qs3WEyMGrmagiHIkkFEueWNnJhkUeR1s/view?usp=drive_link
+https://drive.google.com/file/d/1D-G2_Q0SS3M8zyJbg_XzkF2ANPw1HTuX/view?usp=drive_link
+https://drive.google.com/file/d/1mdmJsDGO-YtJAOF_yPKl6lq4PJOIbQhT/view?usp=drive_link
+https://drive.google.com/file/d/11m9bwfop_sPmnQr_8amB6EEsrbAeG_z5/view?usp=drive_link
+https://drive.google.com/file/d/19tyYt5FMn5kru0g9o2nMJhKPnsDqkIZv/view?usp=drive_link
+https://drive.google.com/file/d/1XvTpUdsVTZ-vydvdYYmynbma--HfUGSl/view?usp=drive_link
+https://drive.google.com/file/d/1MO3hFu68J6NohTzr9aB_fY02VA6QSOqj/view?usp=drive_link
+https://drive.google.com/file/d/1Lh-UjwAk__04YOTWINF_QGVU8SjetVaY/view?usp=drive_link
+https://drive.google.com/file/d/1jkSOUwZV5GJ7rZlVeErjcu0DBQs8Np0d/view?usp=drive_link
+https://drive.google.com/file/d/1VIN1eLI-93WrVQwCjsv6XQr353DqqBYA/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_aloha_raw_urls/static_ziploc_slide.txt

@@ -0,0 +1,8 @@
+https://drive.google.com/drive/folders/1EgKar7rWBmTIRmeJYZciSwjZx3uP2mHO
+https://drive.google.com/file/d/12eYWQO15atK2hBjXhynPJd9MKAj_42pz/view?usp=drive_link
+https://drive.google.com/file/d/1Ul4oEeICJDjgfYTl4H1uaisTzVYIM6wd/view?usp=drive_link
+https://drive.google.com/file/d/1WSF-OG8lKSe2wVYCv5D1aJNipxpgddk-/view?usp=drive_link
+https://drive.google.com/file/d/1_ppD5j5sFh26aWW0JmhLzJMeNB-lCArk/view?usp=drive_link
+https://drive.google.com/file/d/1WUp846dgWXYhu4oJfhHxiU6YL_7N6s4W/view?usp=drive_link
+https://drive.google.com/file/d/1HRZNAIoAQw_uYiPwnBvtBioQoqiqoXdA/view?usp=drive_link
+https://drive.google.com/file/d/1hedGq-QDMnIn8GlXXBC3GiEJ_Y-LTxyt/view?usp=drive_link

lerobot/common/datasets/push_dataset_to_hub/_diffusion_policy_replay_buffer.py

@@ -0,0 +1,634 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""Helper code for loading PushT dataset from Diffusion Policy (https://diffusion-policy.cs.columbia.edu/)
+
+Copied from the original Diffusion Policy repository and used in our `download_and_upload_dataset.py` script.
+"""
+
+from __future__ import annotations
+
+import math
+import numbers
+import os
+from functools import cached_property
+
+import numcodecs
+import numpy as np
+import zarr
+
+
+def check_chunks_compatible(chunks: tuple, shape: tuple):
+    assert len(shape) == len(chunks)
+    for c in chunks:
+        assert isinstance(c, numbers.Integral)
+        assert c > 0
+
+
+def rechunk_recompress_array(group, name, chunks=None, chunk_length=None, compressor=None, tmp_key="_temp"):
+    old_arr = group[name]
+    if chunks is None:
+        chunks = (chunk_length,) + old_arr.chunks[1:] if chunk_length is not None else old_arr.chunks
+    check_chunks_compatible(chunks, old_arr.shape)
+
+    if compressor is None:
+        compressor = old_arr.compressor
+
+    if (chunks == old_arr.chunks) and (compressor == old_arr.compressor):
+        # no change
+        return old_arr
+
+    # rechunk recompress
+    group.move(name, tmp_key)
+    old_arr = group[tmp_key]
+    n_copied, n_skipped, n_bytes_copied = zarr.copy(
+        source=old_arr,
+        dest=group,
+        name=name,
+        chunks=chunks,
+        compressor=compressor,
+    )
+    del group[tmp_key]
+    arr = group[name]
+    return arr
+
+
+def get_optimal_chunks(shape, dtype, target_chunk_bytes=2e6, max_chunk_length=None):
+    """
+    Common shapes
+    T,D
+    T,N,D
+    T,H,W,C
+    T,N,H,W,C
+    """
+    itemsize = np.dtype(dtype).itemsize
+    # reversed
+    rshape = list(shape[::-1])
+    if max_chunk_length is not None:
+        rshape[-1] = int(max_chunk_length)
+    split_idx = len(shape) - 1
+    for i in range(len(shape) - 1):
+        this_chunk_bytes = itemsize * np.prod(rshape[:i])
+        next_chunk_bytes = itemsize * np.prod(rshape[: i + 1])
+        if this_chunk_bytes <= target_chunk_bytes and next_chunk_bytes > target_chunk_bytes:
+            split_idx = i
+
+    rchunks = rshape[:split_idx]
+    item_chunk_bytes = itemsize * np.prod(rshape[:split_idx])
+    this_max_chunk_length = rshape[split_idx]
+    next_chunk_length = min(this_max_chunk_length, math.ceil(target_chunk_bytes / item_chunk_bytes))
+    rchunks.append(next_chunk_length)
+    len_diff = len(shape) - len(rchunks)
+    rchunks.extend([1] * len_diff)
+    chunks = tuple(rchunks[::-1])
+    # print(np.prod(chunks) * itemsize / target_chunk_bytes)
+    return chunks
+
+
+class ReplayBuffer:
+    """
+    Zarr-based temporal datastructure.
+    Assumes first dimension to be time. Only chunk in time dimension.
+    """
+
+    def __init__(self, root: zarr.Group | dict[str, dict]):
+        """
+        Dummy constructor. Use copy_from* and create_from* class methods instead.
+        """
+        assert "data" in root
+        assert "meta" in root
+        assert "episode_ends" in root["meta"]
+        for value in root["data"].values():
+            assert value.shape[0] == root["meta"]["episode_ends"][-1]
+        self.root = root
+
+    # ============= create constructors ===============
+    @classmethod
+    def create_empty_zarr(cls, storage=None, root=None):
+        if root is None:
+            if storage is None:
+                storage = zarr.MemoryStore()
+            root = zarr.group(store=storage)
+        root.require_group("data", overwrite=False)
+        meta = root.require_group("meta", overwrite=False)
+        if "episode_ends" not in meta:
+            meta.zeros("episode_ends", shape=(0,), dtype=np.int64, compressor=None, overwrite=False)
+        return cls(root=root)
+
+    @classmethod
+    def create_empty_numpy(cls):
+        root = {"data": {}, "meta": {"episode_ends": np.zeros((0,), dtype=np.int64)}}
+        return cls(root=root)
+
+    @classmethod
+    def create_from_group(cls, group, **kwargs):
+        if "data" not in group:
+            # create from stratch
+            buffer = cls.create_empty_zarr(root=group, **kwargs)
+        else:
+            # already exist
+            buffer = cls(root=group, **kwargs)
+        return buffer
+
+    @classmethod
+    def create_from_path(cls, zarr_path, mode="r", **kwargs):
+        """
+        Open a on-disk zarr directly (for dataset larger than memory).
+        Slower.
+        """
+        group = zarr.open(os.path.expanduser(zarr_path), mode)
+        return cls.create_from_group(group, **kwargs)
+
+    # ============= copy constructors ===============
+    @classmethod
+    def copy_from_store(
+        cls,
+        src_store,
+        store=None,
+        keys=None,
+        chunks: dict[str, tuple] | None = None,
+        compressors: dict | str | numcodecs.abc.Codec | None = None,
+        if_exists="replace",
+        **kwargs,
+    ):
+        """
+        Load to memory.
+        """
+        src_root = zarr.group(src_store)
+        if chunks is None:
+            chunks = {}
+        if compressors is None:
+            compressors = {}
+        root = None
+        if store is None:
+            # numpy backend
+            meta = {}
+            for key, value in src_root["meta"].items():
+                if len(value.shape) == 0:
+                    meta[key] = np.array(value)
+                else:
+                    meta[key] = value[:]
+
+            if keys is None:
+                keys = src_root["data"].keys()
+            data = {}
+            for key in keys:
+                arr = src_root["data"][key]
+                data[key] = arr[:]
+
+            root = {"meta": meta, "data": data}
+        else:
+            root = zarr.group(store=store)
+            # copy without recompression
+            n_copied, n_skipped, n_bytes_copied = zarr.copy_store(
+                source=src_store, dest=store, source_path="/meta", dest_path="/meta", if_exists=if_exists
+            )
+            data_group = root.create_group("data", overwrite=True)
+            if keys is None:
+                keys = src_root["data"].keys()
+            for key in keys:
+                value = src_root["data"][key]
+                cks = cls._resolve_array_chunks(chunks=chunks, key=key, array=value)
+                cpr = cls._resolve_array_compressor(compressors=compressors, key=key, array=value)
+                if cks == value.chunks and cpr == value.compressor:
+                    # copy without recompression
+                    this_path = "/data/" + key
+                    n_copied, n_skipped, n_bytes_copied = zarr.copy_store(
+                        source=src_store,
+                        dest=store,
+                        source_path=this_path,
+                        dest_path=this_path,
+                        if_exists=if_exists,
+                    )
+                else:
+                    # copy with recompression
+                    n_copied, n_skipped, n_bytes_copied = zarr.copy(
+                        source=value,
+                        dest=data_group,
+                        name=key,
+                        chunks=cks,
+                        compressor=cpr,
+                        if_exists=if_exists,
+                    )
+        buffer = cls(root=root)
+        return buffer
+
+    @classmethod
+    def copy_from_path(
+        cls,
+        zarr_path,
+        backend=None,
+        store=None,
+        keys=None,
+        chunks: dict[str, tuple] | None = None,
+        compressors: dict | str | numcodecs.abc.Codec | None = None,
+        if_exists="replace",
+        **kwargs,
+    ):
+        """
+        Copy a on-disk zarr to in-memory compressed.
+        Recommended
+        """
+        if chunks is None:
+            chunks = {}
+        if compressors is None:
+            compressors = {}
+        if backend == "numpy":
+            print("backend argument is deprecated!")
+            store = None
+        group = zarr.open(os.path.expanduser(zarr_path), "r")
+        return cls.copy_from_store(
+            src_store=group.store,
+            store=store,
+            keys=keys,
+            chunks=chunks,
+            compressors=compressors,
+            if_exists=if_exists,
+            **kwargs,
+        )
+
+    # ============= save methods ===============
+    def save_to_store(
+        self,
+        store,
+        chunks: dict[str, tuple] | None = None,
+        compressors: str | numcodecs.abc.Codec | dict | None = None,
+        if_exists="replace",
+        **kwargs,
+    ):
+        root = zarr.group(store)
+        if chunks is None:
+            chunks = {}
+        if compressors is None:
+            compressors = {}
+        if self.backend == "zarr":
+            # recompression free copy
+            n_copied, n_skipped, n_bytes_copied = zarr.copy_store(
+                source=self.root.store,
+                dest=store,
+                source_path="/meta",
+                dest_path="/meta",
+                if_exists=if_exists,
+            )
+        else:
+            meta_group = root.create_group("meta", overwrite=True)
+            # save meta, no chunking
+            for key, value in self.root["meta"].items():
+                _ = meta_group.array(name=key, data=value, shape=value.shape, chunks=value.shape)
+
+        # save data, chunk
+        data_group = root.create_group("data", overwrite=True)
+        for key, value in self.root["data"].items():
+            cks = self._resolve_array_chunks(chunks=chunks, key=key, array=value)
+            cpr = self._resolve_array_compressor(compressors=compressors, key=key, array=value)
+            if isinstance(value, zarr.Array):
+                if cks == value.chunks and cpr == value.compressor:
+                    # copy without recompression
+                    this_path = "/data/" + key
+                    n_copied, n_skipped, n_bytes_copied = zarr.copy_store(
+                        source=self.root.store,
+                        dest=store,
+                        source_path=this_path,
+                        dest_path=this_path,
+                        if_exists=if_exists,
+                    )
+                else:
+                    # copy with recompression
+                    n_copied, n_skipped, n_bytes_copied = zarr.copy(
+                        source=value,
+                        dest=data_group,
+                        name=key,
+                        chunks=cks,
+                        compressor=cpr,
+                        if_exists=if_exists,
+                    )
+            else:
+                # numpy
+                _ = data_group.array(name=key, data=value, chunks=cks, compressor=cpr)
+        return store
+
+    def save_to_path(
+        self,
+        zarr_path,
+        chunks: dict[str, tuple] | None = None,
+        compressors: str | numcodecs.abc.Codec | dict | None = None,
+        if_exists="replace",
+        **kwargs,
+    ):
+        if chunks is None:
+            chunks = {}
+        if compressors is None:
+            compressors = {}
+        store = zarr.DirectoryStore(os.path.expanduser(zarr_path))
+        return self.save_to_store(
+            store, chunks=chunks, compressors=compressors, if_exists=if_exists, **kwargs
+        )
+
+    @staticmethod
+    def resolve_compressor(compressor="default"):
+        if compressor == "default":
+            compressor = numcodecs.Blosc(cname="lz4", clevel=5, shuffle=numcodecs.Blosc.NOSHUFFLE)
+        elif compressor == "disk":
+            compressor = numcodecs.Blosc("zstd", clevel=5, shuffle=numcodecs.Blosc.BITSHUFFLE)
+        return compressor
+
+    @classmethod
+    def _resolve_array_compressor(cls, compressors: dict | str | numcodecs.abc.Codec, key, array):
+        # allows compressor to be explicitly set to None
+        cpr = "nil"
+        if isinstance(compressors, dict):
+            if key in compressors:
+                cpr = cls.resolve_compressor(compressors[key])
+            elif isinstance(array, zarr.Array):
+                cpr = array.compressor
+        else:
+            cpr = cls.resolve_compressor(compressors)
+        # backup default
+        if cpr == "nil":
+            cpr = cls.resolve_compressor("default")
+        return cpr
+
+    @classmethod
+    def _resolve_array_chunks(cls, chunks: dict | tuple, key, array):
+        cks = None
+        if isinstance(chunks, dict):
+            if key in chunks:
+                cks = chunks[key]
+            elif isinstance(array, zarr.Array):
+                cks = array.chunks
+        elif isinstance(chunks, tuple):
+            cks = chunks
+        else:
+            raise TypeError(f"Unsupported chunks type {type(chunks)}")
+        # backup default
+        if cks is None:
+            cks = get_optimal_chunks(shape=array.shape, dtype=array.dtype)
+        # check
+        check_chunks_compatible(chunks=cks, shape=array.shape)
+        return cks
+
+    # ============= properties =================
+    @cached_property
+    def data(self):
+        return self.root["data"]
+
+    @cached_property
+    def meta(self):
+        return self.root["meta"]
+
+    def update_meta(self, data):
+        # sanitize data
+        np_data = {}
+        for key, value in data.items():
+            if isinstance(value, np.ndarray):
+                np_data[key] = value
+            else:
+                arr = np.array(value)
+                if arr.dtype == object:
+                    raise TypeError(f"Invalid value type {type(value)}")
+                np_data[key] = arr
+
+        meta_group = self.meta
+        if self.backend == "zarr":
+            for key, value in np_data.items():
+                _ = meta_group.array(
+                    name=key, data=value, shape=value.shape, chunks=value.shape, overwrite=True
+                )
+        else:
+            meta_group.update(np_data)
+
+        return meta_group
+
+    @property
+    def episode_ends(self):
+        return self.meta["episode_ends"]
+
+    def get_episode_idxs(self):
+        import numba
+
+        numba.jit(nopython=True)
+
+        def _get_episode_idxs(episode_ends):
+            result = np.zeros((episode_ends[-1],), dtype=np.int64)
+            for i in range(len(episode_ends)):
+                start = 0
+                if i > 0:
+                    start = episode_ends[i - 1]
+                end = episode_ends[i]
+                for idx in range(start, end):
+                    result[idx] = i
+            return result
+
+        return _get_episode_idxs(self.episode_ends)
+
+    @property
+    def backend(self):
+        backend = "numpy"
+        if isinstance(self.root, zarr.Group):
+            backend = "zarr"
+        return backend
+
+    # =========== dict-like API ==============
+    def __repr__(self) -> str:
+        if self.backend == "zarr":
+            return str(self.root.tree())
+        else:
+            return super().__repr__()
+
+    def keys(self):
+        return self.data.keys()
+
+    def values(self):
+        return self.data.values()
+
+    def items(self):
+        return self.data.items()
+
+    def __getitem__(self, key):
+        return self.data[key]
+
+    def __contains__(self, key):
+        return key in self.data
+
+    # =========== our API ==============
+    @property
+    def n_steps(self):
+        if len(self.episode_ends) == 0:
+            return 0
+        return self.episode_ends[-1]
+
+    @property
+    def n_episodes(self):
+        return len(self.episode_ends)
+
+    @property
+    def chunk_size(self):
+        if self.backend == "zarr":
+            return next(iter(self.data.arrays()))[-1].chunks[0]
+        return None
+
+    @property
+    def episode_lengths(self):
+        ends = self.episode_ends[:]
+        ends = np.insert(ends, 0, 0)
+        lengths = np.diff(ends)
+        return lengths
+
+    def add_episode(
+        self,
+        data: dict[str, np.ndarray],
+        chunks: dict[str, tuple] | None = None,
+        compressors: str | numcodecs.abc.Codec | dict | None = None,
+    ):
+        if chunks is None:
+            chunks = {}
+        if compressors is None:
+            compressors = {}
+        assert len(data) > 0
+        is_zarr = self.backend == "zarr"
+
+        curr_len = self.n_steps
+        episode_length = None
+        for value in data.values():
+            assert len(value.shape) >= 1
+            if episode_length is None:
+                episode_length = len(value)
+            else:
+                assert episode_length == len(value)
+        new_len = curr_len + episode_length
+
+        for key, value in data.items():
+            new_shape = (new_len,) + value.shape[1:]
+            # create array
+            if key not in self.data:
+                if is_zarr:
+                    cks = self._resolve_array_chunks(chunks=chunks, key=key, array=value)
+                    cpr = self._resolve_array_compressor(compressors=compressors, key=key, array=value)
+                    arr = self.data.zeros(
+                        name=key, shape=new_shape, chunks=cks, dtype=value.dtype, compressor=cpr
+                    )
+                else:
+                    # copy data to prevent modify
+                    arr = np.zeros(shape=new_shape, dtype=value.dtype)
+                    self.data[key] = arr
+            else:
+                arr = self.data[key]
+                assert value.shape[1:] == arr.shape[1:]
+                # same method for both zarr and numpy
+                if is_zarr:
+                    arr.resize(new_shape)
+                else:
+                    arr.resize(new_shape, refcheck=False)
+            # copy data
+            arr[-value.shape[0] :] = value
+
+        # append to episode ends
+        episode_ends = self.episode_ends
+        if is_zarr:
+            episode_ends.resize(episode_ends.shape[0] + 1)
+        else:
+            episode_ends.resize(episode_ends.shape[0] + 1, refcheck=False)
+        episode_ends[-1] = new_len
+
+        # rechunk
+        if is_zarr and episode_ends.chunks[0] < episode_ends.shape[0]:
+            rechunk_recompress_array(self.meta, "episode_ends", chunk_length=int(episode_ends.shape[0] * 1.5))
+
+    def drop_episode(self):
+        is_zarr = self.backend == "zarr"
+        episode_ends = self.episode_ends[:].copy()
+        assert len(episode_ends) > 0
+        start_idx = 0
+        if len(episode_ends) > 1:
+            start_idx = episode_ends[-2]
+        for value in self.data.values():
+            new_shape = (start_idx,) + value.shape[1:]
+            if is_zarr:
+                value.resize(new_shape)
+            else:
+                value.resize(new_shape, refcheck=False)
+        if is_zarr:
+            self.episode_ends.resize(len(episode_ends) - 1)
+        else:
+            self.episode_ends.resize(len(episode_ends) - 1, refcheck=False)
+
+    def pop_episode(self):
+        assert self.n_episodes > 0
+        episode = self.get_episode(self.n_episodes - 1, copy=True)
+        self.drop_episode()
+        return episode
+
+    def extend(self, data):
+        self.add_episode(data)
+
+    def get_episode(self, idx, copy=False):
+        idx = list(range(len(self.episode_ends)))[idx]
+        start_idx = 0
+        if idx > 0:
+            start_idx = self.episode_ends[idx - 1]
+        end_idx = self.episode_ends[idx]
+        result = self.get_steps_slice(start_idx, end_idx, copy=copy)
+        return result
+
+    def get_episode_slice(self, idx):
+        start_idx = 0
+        if idx > 0:
+            start_idx = self.episode_ends[idx - 1]
+        end_idx = self.episode_ends[idx]
+        return slice(start_idx, end_idx)
+
+    def get_steps_slice(self, start, stop, step=None, copy=False):
+        _slice = slice(start, stop, step)
+
+        result = {}
+        for key, value in self.data.items():
+            x = value[_slice]
+            if copy and isinstance(value, np.ndarray):
+                x = x.copy()
+            result[key] = x
+        return result
+
+    # =========== chunking =============
+    def get_chunks(self) -> dict:
+        assert self.backend == "zarr"
+        chunks = {}
+        for key, value in self.data.items():
+            chunks[key] = value.chunks
+        return chunks
+
+    def set_chunks(self, chunks: dict):
+        assert self.backend == "zarr"
+        for key, value in chunks.items():
+            if key in self.data:
+                arr = self.data[key]
+                if value != arr.chunks:
+                    check_chunks_compatible(chunks=value, shape=arr.shape)
+                    rechunk_recompress_array(self.data, key, chunks=value)
+
+    def get_compressors(self) -> dict:
+        assert self.backend == "zarr"
+        compressors = {}
+        for key, value in self.data.items():
+            compressors[key] = value.compressor
+        return compressors
+
+    def set_compressors(self, compressors: dict):
+        assert self.backend == "zarr"
+        for key, value in compressors.items():
+            if key in self.data:
+                arr = self.data[key]
+                compressor = self.resolve_compressor(value)
+                if compressor != arr.compressor:
+                    rechunk_recompress_array(self.data, key, compressor=compressor)

lerobot/common/datasets/push_dataset_to_hub/_download_raw.py

@@ -0,0 +1,202 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+This file contains download scripts for raw datasets.
+
+Example of usage:
+```
+python lerobot/common/datasets/push_dataset_to_hub/_download_raw.py \
+--raw-dir data/lerobot-raw/pusht_raw \
+--repo-id lerobot-raw/pusht_raw
+```
+"""
+
+import argparse
+import logging
+import warnings
+from pathlib import Path
+
+from huggingface_hub import snapshot_download
+
+from lerobot.common.datasets.push_dataset_to_hub.utils import check_repo_id
+
+# {raw_repo_id: raw_format}
+AVAILABLE_RAW_REPO_IDS = {
+    "lerobot-raw/aloha_mobile_cabinet_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_mobile_chair_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_mobile_elevator_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_mobile_shrimp_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_mobile_wash_pan_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_mobile_wipe_wine_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_sim_insertion_human_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_sim_insertion_scripted_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_sim_transfer_cube_human_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_sim_transfer_cube_scripted_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_battery_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_candy_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_coffee_new_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_coffee_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_cups_open_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_fork_pick_up_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_pingpong_test_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_pro_pencil_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_screw_driver_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_tape_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_thread_velcro_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_towel_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_vinh_cup_left_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_vinh_cup_raw": "aloha_hdf5",
+    "lerobot-raw/aloha_static_ziploc_slide_raw": "aloha_hdf5",
+    "lerobot-raw/umi_cup_in_the_wild_raw": "umi_zarr",
+    "lerobot-raw/pusht_raw": "pusht_zarr",
+    "lerobot-raw/unitreeh1_fold_clothes_raw": "aloha_hdf5",
+    "lerobot-raw/unitreeh1_rearrange_objects_raw": "aloha_hdf5",
+    "lerobot-raw/unitreeh1_two_robot_greeting_raw": "aloha_hdf5",
+    "lerobot-raw/unitreeh1_warehouse_raw": "aloha_hdf5",
+    "lerobot-raw/xarm_lift_medium_raw": "xarm_pkl",
+    "lerobot-raw/xarm_lift_medium_replay_raw": "xarm_pkl",
+    "lerobot-raw/xarm_push_medium_raw": "xarm_pkl",
+    "lerobot-raw/xarm_push_medium_replay_raw": "xarm_pkl",
+    "lerobot-raw/fractal20220817_data_raw": "openx_rlds.fractal20220817_data",
+    "lerobot-raw/kuka_raw": "openx_rlds.kuka",
+    "lerobot-raw/bridge_openx_raw": "openx_rlds.bridge_openx",
+    "lerobot-raw/taco_play_raw": "openx_rlds.taco_play",
+    "lerobot-raw/jaco_play_raw": "openx_rlds.jaco_play",
+    "lerobot-raw/berkeley_cable_routing_raw": "openx_rlds.berkeley_cable_routing",
+    "lerobot-raw/roboturk_raw": "openx_rlds.roboturk",
+    "lerobot-raw/nyu_door_opening_surprising_effectiveness_raw": "openx_rlds.nyu_door_opening_surprising_effectiveness",
+    "lerobot-raw/viola_raw": "openx_rlds.viola",
+    "lerobot-raw/berkeley_autolab_ur5_raw": "openx_rlds.berkeley_autolab_ur5",
+    "lerobot-raw/toto_raw": "openx_rlds.toto",
+    "lerobot-raw/language_table_raw": "openx_rlds.language_table",
+    "lerobot-raw/columbia_cairlab_pusht_real_raw": "openx_rlds.columbia_cairlab_pusht_real",
+    "lerobot-raw/stanford_kuka_multimodal_dataset_raw": "openx_rlds.stanford_kuka_multimodal_dataset",
+    "lerobot-raw/nyu_rot_dataset_raw": "openx_rlds.nyu_rot_dataset",
+    "lerobot-raw/io_ai_tech_raw": "openx_rlds.io_ai_tech",
+    "lerobot-raw/stanford_hydra_dataset_raw": "openx_rlds.stanford_hydra_dataset",
+    "lerobot-raw/austin_buds_dataset_raw": "openx_rlds.austin_buds_dataset",
+    "lerobot-raw/nyu_franka_play_dataset_raw": "openx_rlds.nyu_franka_play_dataset",
+    "lerobot-raw/maniskill_dataset_raw": "openx_rlds.maniskill_dataset",
+    "lerobot-raw/furniture_bench_dataset_raw": "openx_rlds.furniture_bench_dataset",
+    "lerobot-raw/cmu_franka_exploration_dataset_raw": "openx_rlds.cmu_franka_exploration_dataset",
+    "lerobot-raw/ucsd_kitchen_dataset_raw": "openx_rlds.ucsd_kitchen_dataset",
+    "lerobot-raw/ucsd_pick_and_place_dataset_raw": "openx_rlds.ucsd_pick_and_place_dataset",
+    "lerobot-raw/spoc_raw": "openx_rlds.spoc",
+    "lerobot-raw/austin_sailor_dataset_raw": "openx_rlds.austin_sailor_dataset",
+    "lerobot-raw/austin_sirius_dataset_raw": "openx_rlds.austin_sirius_dataset",
+    "lerobot-raw/bc_z_raw": "openx_rlds.bc_z",
+    "lerobot-raw/utokyo_pr2_opening_fridge_raw": "openx_rlds.utokyo_pr2_opening_fridge",
+    "lerobot-raw/utokyo_pr2_tabletop_manipulation_raw": "openx_rlds.utokyo_pr2_tabletop_manipulation",
+    "lerobot-raw/utokyo_xarm_pick_and_place_raw": "openx_rlds.utokyo_xarm_pick_and_place",
+    "lerobot-raw/utokyo_xarm_bimanual_raw": "openx_rlds.utokyo_xarm_bimanual",
+    "lerobot-raw/utokyo_saytap_raw": "openx_rlds.utokyo_saytap",
+    "lerobot-raw/robo_net_raw": "openx_rlds.robo_net",
+    "lerobot-raw/robo_set_raw": "openx_rlds.robo_set",
+    "lerobot-raw/berkeley_mvp_raw": "openx_rlds.berkeley_mvp",
+    "lerobot-raw/berkeley_rpt_raw": "openx_rlds.berkeley_rpt",
+    "lerobot-raw/kaist_nonprehensile_raw": "openx_rlds.kaist_nonprehensile",
+    "lerobot-raw/stanford_mask_vit_raw": "openx_rlds.stanford_mask_vit",
+    "lerobot-raw/tokyo_u_lsmo_raw": "openx_rlds.tokyo_u_lsmo",
+    "lerobot-raw/dlr_sara_pour_raw": "openx_rlds.dlr_sara_pour",
+    "lerobot-raw/dlr_sara_grid_clamp_raw": "openx_rlds.dlr_sara_grid_clamp",
+    "lerobot-raw/dlr_edan_shared_control_raw": "openx_rlds.dlr_edan_shared_control",
+    "lerobot-raw/asu_table_top_raw": "openx_rlds.asu_table_top",
+    "lerobot-raw/stanford_robocook_raw": "openx_rlds.stanford_robocook",
+    "lerobot-raw/imperialcollege_sawyer_wrist_cam_raw": "openx_rlds.imperialcollege_sawyer_wrist_cam",
+    "lerobot-raw/iamlab_cmu_pickup_insert_raw": "openx_rlds.iamlab_cmu_pickup_insert",
+    "lerobot-raw/uiuc_d3field_raw": "openx_rlds.uiuc_d3field",
+    "lerobot-raw/utaustin_mutex_raw": "openx_rlds.utaustin_mutex",
+    "lerobot-raw/berkeley_fanuc_manipulation_raw": "openx_rlds.berkeley_fanuc_manipulation",
+    "lerobot-raw/cmu_playing_with_food_raw": "openx_rlds.cmu_playing_with_food",
+    "lerobot-raw/cmu_play_fusion_raw": "openx_rlds.cmu_play_fusion",
+    "lerobot-raw/cmu_stretch_raw": "openx_rlds.cmu_stretch",
+    "lerobot-raw/berkeley_gnm_recon_raw": "openx_rlds.berkeley_gnm_recon",
+    "lerobot-raw/berkeley_gnm_cory_hall_raw": "openx_rlds.berkeley_gnm_cory_hall",
+    "lerobot-raw/berkeley_gnm_sac_son_raw": "openx_rlds.berkeley_gnm_sac_son",
+    "lerobot-raw/droid_raw": "openx_rlds.droid",
+    "lerobot-raw/droid_100_raw": "openx_rlds.droid100",
+    "lerobot-raw/fmb_raw": "openx_rlds.fmb",
+    "lerobot-raw/dobbe_raw": "openx_rlds.dobbe",
+    "lerobot-raw/usc_cloth_sim_raw": "openx_rlds.usc_cloth_sim",
+    "lerobot-raw/plex_robosuite_raw": "openx_rlds.plex_robosuite",
+    "lerobot-raw/conq_hose_manipulation_raw": "openx_rlds.conq_hose_manipulation",
+    "lerobot-raw/vima_raw": "openx_rlds.vima",
+    "lerobot-raw/robot_vqa_raw": "openx_rlds.robot_vqa",
+    "lerobot-raw/mimic_play_raw": "openx_rlds.mimic_play",
+    "lerobot-raw/tidybot_raw": "openx_rlds.tidybot",
+    "lerobot-raw/eth_agent_affordances_raw": "openx_rlds.eth_agent_affordances",
+}
+
+
+def download_raw(raw_dir: Path, repo_id: str):
+    check_repo_id(repo_id)
+    user_id, dataset_id = repo_id.split("/")
+
+    if not dataset_id.endswith("_raw"):
+        warnings.warn(
+            f"""`dataset_id` ({dataset_id}) doesn't end with '_raw' (e.g. 'lerobot/pusht_raw'). Following this
+             naming convention by renaming your repository is advised, but not mandatory.""",
+            stacklevel=1,
+        )
+
+    # Send warning if raw_dir isn't well formatted
+    if raw_dir.parts[-2] != user_id or raw_dir.parts[-1] != dataset_id:
+        warnings.warn(
+            f"""`raw_dir` ({raw_dir}) doesn't contain a community or user id `/` the name of the dataset that
+             match the `repo_id` (e.g. 'data/lerobot/pusht_raw'). Following this naming convention is advised,
+             but not mandatory.""",
+            stacklevel=1,
+        )
+    raw_dir.mkdir(parents=True, exist_ok=True)
+
+    logging.info(f"Start downloading from huggingface.co/{user_id} for {dataset_id}")
+    snapshot_download(repo_id, repo_type="dataset", local_dir=raw_dir)
+    logging.info(f"Finish downloading from huggingface.co/{user_id} for {dataset_id}")
+
+
+def download_all_raw_datasets(data_dir: Path | None = None):
+    if data_dir is None:
+        data_dir = Path("data")
+    for repo_id in AVAILABLE_RAW_REPO_IDS:
+        raw_dir = data_dir / repo_id
+        download_raw(raw_dir, repo_id)
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description=f"""A script to download raw datasets from Hugging Face hub to a local directory. Here is a
+            non exhaustive list of available repositories to use in `--repo-id`: {list(AVAILABLE_RAW_REPO_IDS.keys())}""",
+    )
+
+    parser.add_argument(
+        "--raw-dir",
+        type=Path,
+        required=True,
+        help="Directory containing input raw datasets (e.g. `data/aloha_mobile_chair_raw` or `data/pusht_raw).",
+    )
+    parser.add_argument(
+        "--repo-id",
+        type=str,
+        required=True,
+        help="""Repositery identifier on Hugging Face: a community or a user name `/` the name of
+        the dataset (e.g. `lerobot/pusht_raw`, `cadene/aloha_sim_insertion_human_raw`).""",
+    )
+    args = parser.parse_args()
+    download_raw(**vars(args))
+
+
+if __name__ == "__main__":
+    main()

lerobot/common/datasets/push_dataset_to_hub/_encode_datasets.py

@@ -0,0 +1,184 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Use this script to batch encode lerobot dataset from their raw format to LeRobotDataset and push their updated
+version to the hub. Under the hood, this script reuses 'push_dataset_to_hub.py'. It assumes that you already
+downloaded raw datasets, which you can do with the related '_download_raw.py' script.
+
+For instance, for codebase_version = 'v1.6', the following command was run, assuming raw datasets from
+lerobot-raw were downloaded in 'raw/datasets/directory':
+```bash
+python lerobot/common/datasets/push_dataset_to_hub/_encode_datasets.py \
+  --raw-dir raw/datasets/directory \
+  --raw-repo-ids lerobot-raw \
+  --local-dir push/datasets/directory \
+  --tests-data-dir tests/data \
+  --push-repo lerobot \
+  --vcodec libsvtav1 \
+  --pix-fmt yuv420p \
+  --g 2 \
+  --crf 30
+```
+"""
+
+import argparse
+from pathlib import Path
+
+from lerobot.common.datasets.lerobot_dataset import CODEBASE_VERSION
+from lerobot.common.datasets.push_dataset_to_hub._download_raw import AVAILABLE_RAW_REPO_IDS
+from lerobot.common.datasets.push_dataset_to_hub.utils import check_repo_id
+from lerobot.scripts.push_dataset_to_hub import push_dataset_to_hub
+
+
+def get_push_repo_id_from_raw(raw_repo_id: str, push_repo: str) -> str:
+    dataset_id_raw = raw_repo_id.split("/")[1]
+    dataset_id = dataset_id_raw.removesuffix("_raw")
+    return f"{push_repo}/{dataset_id}"
+
+
+def encode_datasets(
+    raw_dir: Path,
+    raw_repo_ids: list[str],
+    push_repo: str,
+    vcodec: str,
+    pix_fmt: str,
+    g: int,
+    crf: int,
+    local_dir: Path | None = None,
+    tests_data_dir: Path | None = None,
+    raw_format: str | None = None,
+    dry_run: bool = False,
+) -> None:
+    if len(raw_repo_ids) == 1 and raw_repo_ids[0].lower() == "lerobot-raw":
+        raw_repo_ids_format = AVAILABLE_RAW_REPO_IDS
+    else:
+        if raw_format is None:
+            raise ValueError(raw_format)
+        raw_repo_ids_format = {id_: raw_format for id_ in raw_repo_ids}
+
+    for raw_repo_id, repo_raw_format in raw_repo_ids_format.items():
+        check_repo_id(raw_repo_id)
+        dataset_repo_id_push = get_push_repo_id_from_raw(raw_repo_id, push_repo)
+        dataset_raw_dir = raw_dir / raw_repo_id
+        dataset_dir = local_dir / dataset_repo_id_push if local_dir is not None else None
+        encoding = {
+            "vcodec": vcodec,
+            "pix_fmt": pix_fmt,
+            "g": g,
+            "crf": crf,
+        }
+
+        if not (dataset_raw_dir).is_dir():
+            raise NotADirectoryError(dataset_raw_dir)
+
+        if not dry_run:
+            push_dataset_to_hub(
+                dataset_raw_dir,
+                raw_format=repo_raw_format,
+                repo_id=dataset_repo_id_push,
+                local_dir=dataset_dir,
+                resume=True,
+                encoding=encoding,
+                tests_data_dir=tests_data_dir,
+            )
+        else:
+            print(
+                f"DRY RUN: {dataset_raw_dir}  -->  {dataset_dir}  -->  {dataset_repo_id_push}@{CODEBASE_VERSION}"
+            )
+
+
+def main():
+    parser = argparse.ArgumentParser()
+    parser.add_argument(
+        "--raw-dir",
+        type=Path,
+        default=Path("data"),
+        help="Directory where raw datasets are located.",
+    )
+    parser.add_argument(
+        "--raw-repo-ids",
+        type=str,
+        nargs="*",
+        default=["lerobot-raw"],
+        help="""Raw dataset repo ids. if 'lerobot-raw', the keys from `AVAILABLE_RAW_REPO_IDS` will be
+            used and raw datasets will be fetched from the 'lerobot-raw/' repo and pushed with their
+            associated format. It is assumed that each dataset is located at `raw_dir / raw_repo_id` """,
+    )
+    parser.add_argument(
+        "--raw-format",
+        type=str,
+        default=None,
+        help="""Raw format to use for the raw repo-ids. Must be specified if --raw-repo-ids is not
+            'lerobot-raw'""",
+    )
+    parser.add_argument(
+        "--local-dir",
+        type=Path,
+        default=None,
+        help="""When provided, writes the dataset converted to LeRobotDataset format in this directory
+        (e.g. `data/lerobot/aloha_mobile_chair`).""",
+    )
+    parser.add_argument(
+        "--push-repo",
+        type=str,
+        default="lerobot",
+        help="Repo to upload datasets to",
+    )
+    parser.add_argument(
+        "--vcodec",
+        type=str,
+        default="libsvtav1",
+        help="Codec to use for encoding videos",
+    )
+    parser.add_argument(
+        "--pix-fmt",
+        type=str,
+        default="yuv420p",
+        help="Pixel formats (chroma subsampling) to be used for encoding",
+    )
+    parser.add_argument(
+        "--g",
+        type=int,
+        default=2,
+        help="Group of pictures sizes to be used for encoding.",
+    )
+    parser.add_argument(
+        "--crf",
+        type=int,
+        default=30,
+        help="Constant rate factors to be used for encoding.",
+    )
+    parser.add_argument(
+        "--tests-data-dir",
+        type=Path,
+        default=None,
+        help=(
+            "When provided, save tests artifacts into the given directory "
+            "(e.g. `--tests-data-dir tests/data` will save to tests/data/{--repo-id})."
+        ),
+    )
+    parser.add_argument(
+        "--dry-run",
+        type=int,
+        default=0,
+        help="If not set to 0, this script won't download or upload anything.",
+    )
+    args = parser.parse_args()
+    encode_datasets(**vars(args))
+
+
+if __name__ == "__main__":
+    main()

lerobot/common/datasets/push_dataset_to_hub/_umi_imagecodecs_numcodecs.py

@@ -0,0 +1,326 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# imagecodecs/numcodecs.py
+
+# Copyright (c) 2021-2022, Christoph Gohlke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+#    contributors may be used to endorse or promote products derived from
+#    this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+# Copied from: https://github.com/real-stanford/universal_manipulation_interface/blob/298776ce251f33b6b3185a98d6e7d1f9ad49168b/diffusion_policy/codecs/imagecodecs_numcodecs.py#L1
+"""Additional numcodecs implemented using imagecodecs."""
+
+__version__ = "2022.9.26"
+
+__all__ = ("register_codecs",)
+
+import imagecodecs
+import numpy
+from numcodecs.abc import Codec
+from numcodecs.registry import get_codec, register_codec
+
+# TODO (azouitine): Remove useless codecs
+
+
+def protective_squeeze(x: numpy.ndarray):
+    """
+    Squeeze dim only if it's not the last dim.
+    Image dim expected to be *, H, W, C
+    """
+    img_shape = x.shape[-3:]
+    if len(x.shape) > 3:
+        n_imgs = numpy.prod(x.shape[:-3])
+        if n_imgs > 1:
+            img_shape = (-1,) + img_shape
+    return x.reshape(img_shape)
+
+
+def get_default_image_compressor(**kwargs):
+    if imagecodecs.JPEGXL:
+        # has JPEGXL
+        this_kwargs = {
+            "effort": 3,
+            "distance": 0.3,
+            # bug in libjxl, invalid codestream for non-lossless
+            # when decoding speed > 1
+            "decodingspeed": 1,
+        }
+        this_kwargs.update(kwargs)
+        return JpegXl(**this_kwargs)
+    else:
+        this_kwargs = {"level": 50}
+        this_kwargs.update(kwargs)
+        return Jpeg2k(**this_kwargs)
+
+
+class Jpeg2k(Codec):
+    """JPEG 2000 codec for numcodecs."""
+
+    codec_id = "imagecodecs_jpeg2k"
+
+    def __init__(
+        self,
+        level=None,
+        codecformat=None,
+        colorspace=None,
+        tile=None,
+        reversible=None,
+        bitspersample=None,
+        resolutions=None,
+        numthreads=None,
+        verbose=0,
+    ):
+        self.level = level
+        self.codecformat = codecformat
+        self.colorspace = colorspace
+        self.tile = None if tile is None else tuple(tile)
+        self.reversible = reversible
+        self.bitspersample = bitspersample
+        self.resolutions = resolutions
+        self.numthreads = numthreads
+        self.verbose = verbose
+
+    def encode(self, buf):
+        buf = protective_squeeze(numpy.asarray(buf))
+        return imagecodecs.jpeg2k_encode(
+            buf,
+            level=self.level,
+            codecformat=self.codecformat,
+            colorspace=self.colorspace,
+            tile=self.tile,
+            reversible=self.reversible,
+            bitspersample=self.bitspersample,
+            resolutions=self.resolutions,
+            numthreads=self.numthreads,
+            verbose=self.verbose,
+        )
+
+    def decode(self, buf, out=None):
+        return imagecodecs.jpeg2k_decode(buf, verbose=self.verbose, numthreads=self.numthreads, out=out)
+
+
+class JpegXl(Codec):
+    """JPEG XL codec for numcodecs."""
+
+    codec_id = "imagecodecs_jpegxl"
+
+    def __init__(
+        self,
+        # encode
+        level=None,
+        effort=None,
+        distance=None,
+        lossless=None,
+        decodingspeed=None,
+        photometric=None,
+        planar=None,
+        usecontainer=None,
+        # decode
+        index=None,
+        keeporientation=None,
+        # both
+        numthreads=None,
+    ):
+        """
+        Return JPEG XL image from numpy array.
+        Float must be in nominal range 0..1.
+
+        Currently L, LA, RGB, RGBA images are supported in contig mode.
+        Extra channels are only supported for grayscale images in planar mode.
+
+        Parameters
+        ----------
+        level : Default to None, i.e. not overwriting lossess and decodingspeed options.
+            When < 0: Use lossless compression
+            When in [0,1,2,3,4]: Sets the decoding speed tier for the provided options.
+                Minimum is 0 (slowest to decode, best quality/density), and maximum
+                is 4 (fastest to decode, at the cost of some quality/density).
+        effort : Default to 3.
+            Sets encoder effort/speed level without affecting decoding speed.
+            Valid values are, from faster to slower speed: 1:lightning 2:thunder
+                3:falcon 4:cheetah 5:hare 6:wombat 7:squirrel 8:kitten 9:tortoise.
+            Speed: lightning, thunder, falcon, cheetah, hare, wombat, squirrel, kitten, tortoise
+            control the encoder effort in ascending order.
+            This also affects memory usage: using lower effort will typically reduce memory
+            consumption during encoding.
+            lightning and thunder are fast modes useful for lossless mode (modular).
+            falcon disables all of the following tools.
+            cheetah enables coefficient reordering, context clustering, and heuristics for selecting DCT sizes and quantization steps.
+            hare enables Gaborish filtering, chroma from luma, and an initial estimate of quantization steps.
+            wombat enables error diffusion quantization and full DCT size selection heuristics.
+            squirrel (default) enables dots, patches, and spline detection, and full context clustering.
+            kitten optimizes the adaptive quantization for a psychovisual metric.
+            tortoise enables a more thorough adaptive quantization search.
+        distance : Default to 1.0
+            Sets the distance level for lossy compression: target max butteraugli distance,
+            lower = higher quality. Range: 0 .. 15. 0.0 = mathematically lossless
+            (however, use JxlEncoderSetFrameLossless instead to use true lossless,
+            as setting distance to 0 alone is not the only requirement).
+            1.0 = visually lossless. Recommended range: 0.5 .. 3.0.
+        lossess : Default to False.
+            Use lossess encoding.
+        decodingspeed : Default to 0.
+            Duplicate to level. [0,4]
+        photometric : Return JxlColorSpace value.
+            Default logic is quite complicated but works most of the time.
+            Accepted value:
+                int: [-1,3]
+                str: ['RGB',
+                    'WHITEISZERO', 'MINISWHITE',
+                    'BLACKISZERO', 'MINISBLACK', 'GRAY',
+                    'XYB', 'KNOWN']
+        planar : Enable multi-channel mode.
+            Default to false.
+        usecontainer :
+            Forces the encoder to use the box-based container format (BMFF)
+            even when not necessary.
+            When using JxlEncoderUseBoxes, JxlEncoderStoreJPEGMetadata or
+            JxlEncoderSetCodestreamLevel with level 10, the encoder will
+            automatically also use the container format, it is not necessary
+            to use JxlEncoderUseContainer for those use cases.
+            By default this setting is disabled.
+        index : Selectively decode frames for animation.
+            Default to 0, decode all frames.
+            When set to > 0, decode that frame index only.
+        keeporientation :
+            Enables or disables preserving of as-in-bitstream pixeldata orientation.
+            Some images are encoded with an Orientation tag indicating that the
+            decoder must perform a rotation and/or mirroring to the encoded image data.
+
+            If skip_reorientation is JXL_FALSE (the default): the decoder will apply
+            the transformation from the orientation setting, hence rendering the image
+            according to its specified intent. When producing a JxlBasicInfo, the decoder
+            will always set the orientation field to JXL_ORIENT_IDENTITY (matching the
+            returned pixel data) and also align xsize and ysize so that they correspond
+            to the width and the height of the returned pixel data.
+
+            If skip_reorientation is JXL_TRUE: the decoder will skip applying the
+            transformation from the orientation setting, returning the image in
+            the as-in-bitstream pixeldata orientation. This may be faster to decode
+            since the decoder doesnt have to apply the transformation, but can
+            cause wrong display of the image if the orientation tag is not correctly
+            taken into account by the user.
+
+            By default, this option is disabled, and the returned pixel data is
+            re-oriented according to the images Orientation setting.
+        threads : Default to 1.
+            If <= 0, use all cores.
+            If > 32, clipped to 32.
+        """
+
+        self.level = level
+        self.effort = effort
+        self.distance = distance
+        self.lossless = bool(lossless)
+        self.decodingspeed = decodingspeed
+        self.photometric = photometric
+        self.planar = planar
+        self.usecontainer = usecontainer
+        self.index = index
+        self.keeporientation = keeporientation
+        self.numthreads = numthreads
+
+    def encode(self, buf):
+        # TODO: only squeeze all but last dim
+        buf = protective_squeeze(numpy.asarray(buf))
+        return imagecodecs.jpegxl_encode(
+            buf,
+            level=self.level,
+            effort=self.effort,
+            distance=self.distance,
+            lossless=self.lossless,
+            decodingspeed=self.decodingspeed,
+            photometric=self.photometric,
+            planar=self.planar,
+            usecontainer=self.usecontainer,
+            numthreads=self.numthreads,
+        )
+
+    def decode(self, buf, out=None):
+        return imagecodecs.jpegxl_decode(
+            buf,
+            index=self.index,
+            keeporientation=self.keeporientation,
+            numthreads=self.numthreads,
+            out=out,
+        )
+
+
+def _flat(out):
+    """Return numpy array as contiguous view of bytes if possible."""
+    if out is None:
+        return None
+    view = memoryview(out)
+    if view.readonly or not view.contiguous:
+        return None
+    return view.cast("B")
+
+
+def register_codecs(codecs=None, force=False, verbose=True):
+    """Register codecs in this module with numcodecs."""
+    for name, cls in globals().items():
+        if not hasattr(cls, "codec_id") or name == "Codec":
+            continue
+        if codecs is not None and cls.codec_id not in codecs:
+            continue
+        try:
+            try:  # noqa: SIM105
+                get_codec({"id": cls.codec_id})
+            except TypeError:
+                # registered, but failed
+                pass
+        except ValueError:
+            # not registered yet
+            pass
+        else:
+            if not force:
+                if verbose:
+                    log_warning(f"numcodec {cls.codec_id!r} already registered")
+                continue
+            if verbose:
+                log_warning(f"replacing registered numcodec {cls.codec_id!r}")
+        register_codec(cls)
+
+
+def log_warning(msg, *args, **kwargs):
+    """Log message with level WARNING."""
+    import logging
+
+    logging.getLogger(__name__).warning(msg, *args, **kwargs)

lerobot/common/datasets/push_dataset_to_hub/aloha_hdf5_format.py

@@ -0,0 +1,233 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Contains utilities to process raw data format of HDF5 files like in: https://github.com/tonyzhaozh/act
+"""
+
+import gc
+import shutil
+from pathlib import Path
+
+import h5py
+import numpy as np
+import torch
+import tqdm
+from datasets import Dataset, Features, Image, Sequence, Value
+from PIL import Image as PILImage
+
+from lerobot.common.datasets.lerobot_dataset import CODEBASE_VERSION
+from lerobot.common.datasets.push_dataset_to_hub.utils import (
+    calculate_episode_data_index,
+    concatenate_episodes,
+    get_default_encoding,
+    save_images_concurrently,
+)
+from lerobot.common.datasets.utils import (
+    hf_transform_to_torch,
+)
+from lerobot.common.datasets.video_utils import VideoFrame, encode_video_frames
+
+
+def get_cameras(hdf5_data):
+    # ignore depth channel, not currently handled
+    # TODO(rcadene): add depth
+    rgb_cameras = [key for key in hdf5_data["/observations/images"].keys() if "depth" not in key]  # noqa: SIM118
+    return rgb_cameras
+
+
+def check_format(raw_dir) -> bool:
+    # only frames from simulation are uncompressed
+    compressed_images = "sim" not in raw_dir.name
+
+    hdf5_paths = list(raw_dir.glob("episode_*.hdf5"))
+    assert len(hdf5_paths) != 0
+    for hdf5_path in hdf5_paths:
+        with h5py.File(hdf5_path, "r") as data:
+            assert "/action" in data
+            assert "/observations/qpos" in data
+
+            assert data["/action"].ndim == 2
+            assert data["/observations/qpos"].ndim == 2
+
+            num_frames = data["/action"].shape[0]
+            assert num_frames == data["/observations/qpos"].shape[0]
+
+            for camera in get_cameras(data):
+                assert num_frames == data[f"/observations/images/{camera}"].shape[0]
+
+                if compressed_images:
+                    assert data[f"/observations/images/{camera}"].ndim == 2
+                else:
+                    assert data[f"/observations/images/{camera}"].ndim == 4
+                    b, h, w, c = data[f"/observations/images/{camera}"].shape
+                    assert c < h and c < w, f"Expect (h,w,c) image format but ({h=},{w=},{c=}) provided."
+
+
+def load_from_raw(
+    raw_dir: Path,
+    videos_dir: Path,
+    fps: int,
+    video: bool,
+    episodes: list[int] | None = None,
+    encoding: dict | None = None,
+):
+    # only frames from simulation are uncompressed
+    compressed_images = "sim" not in raw_dir.name
+
+    hdf5_files = sorted(raw_dir.glob("episode_*.hdf5"))
+    num_episodes = len(hdf5_files)
+
+    ep_dicts = []
+    ep_ids = episodes if episodes else range(num_episodes)
+    for ep_idx in tqdm.tqdm(ep_ids):
+        ep_path = hdf5_files[ep_idx]
+        with h5py.File(ep_path, "r") as ep:
+            num_frames = ep["/action"].shape[0]
+
+            # last step of demonstration is considered done
+            done = torch.zeros(num_frames, dtype=torch.bool)
+            done[-1] = True
+
+            state = torch.from_numpy(ep["/observations/qpos"][:])
+            action = torch.from_numpy(ep["/action"][:])
+            if "/observations/qvel" in ep:
+                velocity = torch.from_numpy(ep["/observations/qvel"][:])
+            if "/observations/effort" in ep:
+                effort = torch.from_numpy(ep["/observations/effort"][:])
+
+            ep_dict = {}
+
+            for camera in get_cameras(ep):
+                img_key = f"observation.images.{camera}"
+
+                if compressed_images:
+                    import cv2
+
+                    # load one compressed image after the other in RAM and uncompress
+                    imgs_array = []
+                    for data in ep[f"/observations/images/{camera}"]:
+                        imgs_array.append(cv2.imdecode(data, 1))
+                    imgs_array = np.array(imgs_array)
+
+                else:
+                    # load all images in RAM
+                    imgs_array = ep[f"/observations/images/{camera}"][:]
+
+                if video:
+                    # save png images in temporary directory
+                    tmp_imgs_dir = videos_dir / "tmp_images"
+                    save_images_concurrently(imgs_array, tmp_imgs_dir)
+
+                    # encode images to a mp4 video
+                    fname = f"{img_key}_episode_{ep_idx:06d}.mp4"
+                    video_path = videos_dir / fname
+                    encode_video_frames(tmp_imgs_dir, video_path, fps, **(encoding or {}))
+
+                    # clean temporary images directory
+                    shutil.rmtree(tmp_imgs_dir)
+
+                    # store the reference to the video frame
+                    ep_dict[img_key] = [
+                        {"path": f"videos/{fname}", "timestamp": i / fps} for i in range(num_frames)
+                    ]
+                else:
+                    ep_dict[img_key] = [PILImage.fromarray(x) for x in imgs_array]
+
+            ep_dict["observation.state"] = state
+            if "/observations/velocity" in ep:
+                ep_dict["observation.velocity"] = velocity
+            if "/observations/effort" in ep:
+                ep_dict["observation.effort"] = effort
+            ep_dict["action"] = action
+            ep_dict["episode_index"] = torch.tensor([ep_idx] * num_frames)
+            ep_dict["frame_index"] = torch.arange(0, num_frames, 1)
+            ep_dict["timestamp"] = torch.arange(0, num_frames, 1) / fps
+            ep_dict["next.done"] = done
+            # TODO(rcadene): add reward and success by computing them in sim
+
+            assert isinstance(ep_idx, int)
+            ep_dicts.append(ep_dict)
+
+        gc.collect()
+
+    data_dict = concatenate_episodes(ep_dicts)
+
+    total_frames = data_dict["frame_index"].shape[0]
+    data_dict["index"] = torch.arange(0, total_frames, 1)
+    return data_dict
+
+
+def to_hf_dataset(data_dict, video) -> Dataset:
+    features = {}
+
+    keys = [key for key in data_dict if "observation.images." in key]
+    for key in keys:
+        if video:
+            features[key] = VideoFrame()
+        else:
+            features[key] = Image()
+
+    features["observation.state"] = Sequence(
+        length=data_dict["observation.state"].shape[1], feature=Value(dtype="float32", id=None)
+    )
+    if "observation.velocity" in data_dict:
+        features["observation.velocity"] = Sequence(
+            length=data_dict["observation.velocity"].shape[1], feature=Value(dtype="float32", id=None)
+        )
+    if "observation.effort" in data_dict:
+        features["observation.effort"] = Sequence(
+            length=data_dict["observation.effort"].shape[1], feature=Value(dtype="float32", id=None)
+        )
+    features["action"] = Sequence(
+        length=data_dict["action"].shape[1], feature=Value(dtype="float32", id=None)
+    )
+    features["episode_index"] = Value(dtype="int64", id=None)
+    features["frame_index"] = Value(dtype="int64", id=None)
+    features["timestamp"] = Value(dtype="float32", id=None)
+    features["next.done"] = Value(dtype="bool", id=None)
+    features["index"] = Value(dtype="int64", id=None)
+
+    hf_dataset = Dataset.from_dict(data_dict, features=Features(features))
+    hf_dataset.set_transform(hf_transform_to_torch)
+    return hf_dataset
+
+
+def from_raw_to_lerobot_format(
+    raw_dir: Path,
+    videos_dir: Path,
+    fps: int | None = None,
+    video: bool = True,
+    episodes: list[int] | None = None,
+    encoding: dict | None = None,
+):
+    # sanity check
+    check_format(raw_dir)
+
+    if fps is None:
+        fps = 50
+
+    data_dict = load_from_raw(raw_dir, videos_dir, fps, video, episodes, encoding)
+    hf_dataset = to_hf_dataset(data_dict, video)
+    episode_data_index = calculate_episode_data_index(hf_dataset)
+    info = {
+        "codebase_version": CODEBASE_VERSION,
+        "fps": fps,
+        "video": video,
+    }
+    if video:
+        info["encoding"] = get_default_encoding()
+
+    return hf_dataset, episode_data_index, info

lerobot/common/datasets/push_dataset_to_hub/cam_png_format.py

@@ -0,0 +1,107 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Contains utilities to process raw data format of png images files recorded with capture_camera_feed.py
+"""
+
+from pathlib import Path
+
+import torch
+from datasets import Dataset, Features, Image, Value
+from PIL import Image as PILImage
+
+from lerobot.common.datasets.lerobot_dataset import CODEBASE_VERSION
+from lerobot.common.datasets.push_dataset_to_hub.utils import (
+    calculate_episode_data_index,
+    concatenate_episodes,
+)
+from lerobot.common.datasets.utils import hf_transform_to_torch
+from lerobot.common.datasets.video_utils import VideoFrame
+
+
+def check_format(raw_dir: Path) -> bool:
+    image_paths = list(raw_dir.glob("frame_*.png"))
+    if len(image_paths) == 0:
+        raise ValueError
+
+
+def load_from_raw(raw_dir: Path, fps: int, episodes: list[int] | None = None):
+    if episodes is not None:
+        # TODO(aliberts): add support for multi-episodes.
+        raise NotImplementedError()
+
+    ep_dict = {}
+    ep_idx = 0
+
+    image_paths = sorted(raw_dir.glob("frame_*.png"))
+    num_frames = len(image_paths)
+
+    ep_dict["observation.image"] = [PILImage.open(x) for x in image_paths]
+    ep_dict["episode_index"] = torch.tensor([ep_idx] * num_frames)
+    ep_dict["frame_index"] = torch.arange(0, num_frames, 1)
+    ep_dict["timestamp"] = torch.arange(0, num_frames, 1) / fps
+
+    ep_dicts = [ep_dict]
+    data_dict = concatenate_episodes(ep_dicts)
+    total_frames = data_dict["frame_index"].shape[0]
+    data_dict["index"] = torch.arange(0, total_frames, 1)
+    return data_dict
+
+
+def to_hf_dataset(data_dict, video) -> Dataset:
+    features = {}
+    if video:
+        features["observation.image"] = VideoFrame()
+    else:
+        features["observation.image"] = Image()
+
+    features["episode_index"] = Value(dtype="int64", id=None)
+    features["frame_index"] = Value(dtype="int64", id=None)
+    features["timestamp"] = Value(dtype="float32", id=None)
+    features["index"] = Value(dtype="int64", id=None)
+
+    hf_dataset = Dataset.from_dict(data_dict, features=Features(features))
+    hf_dataset.set_transform(hf_transform_to_torch)
+    return hf_dataset
+
+
+def from_raw_to_lerobot_format(
+    raw_dir: Path,
+    videos_dir: Path,
+    fps: int | None = None,
+    video: bool = True,
+    episodes: list[int] | None = None,
+    encoding: dict | None = None,
+):
+    if video or episodes or encoding is not None:
+        # TODO(aliberts): support this
+        raise NotImplementedError
+
+    # sanity check
+    check_format(raw_dir)
+
+    if fps is None:
+        fps = 30
+
+    data_dict = load_from_raw(raw_dir, videos_dir, fps, video, episodes)
+    hf_dataset = to_hf_dataset(data_dict, video)
+    episode_data_index = calculate_episode_data_index(hf_dataset)
+    info = {
+        "codebase_version": CODEBASE_VERSION,
+        "fps": fps,
+        "video": video,
+    }
+    return hf_dataset, episode_data_index, info